Building Scottie Scheffler's Stealth 2 Driver | TaylorMade Golf 

Here after Scottie's 2nd Masters win. Literally my entire RU-vid feed is Scottie right now.

I think these club-building videos with presenter Chris Trott are in their own unique, one-of-a-kind video category on RU-vid -- and that's saying something. (If Callaway, Ping, Titleist, Srixon, et al. have posted similar "behind the scenes with the pros" videos, I haven't seen them.) And like badbilly429 says below, they're always interesting & they never get old. Thanks & keep up the great work, Trottie!

no matter how many times I watch these videos they never get old!

Chris is a gem! Taylormade is lucky to have him.

Saw someone ask for this exact type of video last week and TM delivered. Love the content.

Crazy how sensitive these guys are to any little thing, but reminders in my grip drive me crazy. Lol. This was a great video!!!

Trottie is the man! What a master fitter.

It was nice to see a club building video back in the truck. Its been a minute

Just a unique perspective every time

Well done Chris 👏

Love the build videos, keep ‘em comin 🙌

First time watching something like this, such attention to detail!

If Scottie has an old Stealth2 Driver lying around I'd love to swing it! My Nike VR Pro Limited might be a bit out of date from 2011.. still have the 3 wood like he used to swing as well! Hope he takes back #1!

TROTTIE i love these videos man :)

What a legend. Love that kind of video

Great build

Love the kettle Trottie ,beautiful Pepsi 😍

So what SW does he play in his driver?

Whenever I hear Fargivness it makes me cringe.

Trotty rocking the Pepsi. Noting the old Sub he used to have too.

Trottie is the man

nice titleist truck in the back

Great video.

Would love to learn more about those training grips Scottie uses!

Videographer went all out for the cinematic look. If they're using a Pro Mist filter, I suggest maybe trying Black Satin. Would provide similar effect but a little grittier so Trottie doesn't look so soft and heavenly lol.

Top brand by a mile when it comes to this stuff. Love it.

so with the tour pros being so particular about everything, when they go up or down in loft on the shaft do they come back to the truck and get a new grip on it since it would then be twisted?

Love the watch

Do you check the shaft oscillation prior to the final curing process?

Is there any counter weighting used or counter balancing? Just wondering since that is rarely discussed yet seems to be a norm now days in club making.

That music needs to come down my guys.

Love trotie

How do you get those bottom weights for the stealth 2+ ?

I have seen a few of these video and notice that you never SST Pure the shaft. Is Puring a gimmick or does it really make a difference ?

@taylormade Where does one find the head weights - 19g back 18g front etc.? Looks like alot of places tap out at 14 grams.

Does the balance point whilst the grip/tape is soaking wet?

Where and when do you find out you need, 1,2,3 plus layers of tape? You can order extra but who does these fittings?

Great video Trottie! Question for you: Does Scottie play his driver 3/4” shorter? I believe that’s what I heard in the video? TM stock is 45.75” and he wants 45”?

What is the finished swing weight?

What was the stock weight before 19’and 18 were put in ?

You unscrew the driver after lining it up? How do you ensure the graphics are still lined up after torquing on the head screw?

I love how guys put out a driver and don’t sell heavier weights. Smart marketing team over there at TaylorMade

Is “pureing” golf shafts a thing, or just upsell rubbish from the big box club fitters?

As long as the drive stays in bounds I'm happy.

How long for the grip to set up?

Is there a link to the special torque weight wrench? If a normal person moves those weights does it need more or less torque from the normal tool? 12:38

How often do players replace their drivers and irons?

That watch though

Entertaining

What swing weight does Scotty play? U lose about 4.5 swing weights from the length, so I'm assuming you put at least 9grams of extra head weight for stock SW?

Trottie, how often do you build drivers for these guys per season? Why the change after the WM? What did you change on his driver setup since his last event with it? Love the club making videos!

Loft sleeves for tm drivers are 1,5 degs now?

6 Tapes is wild, I bet he would switch to a mid size grip if we was doing his grips himself lol

dream van❤

How did Scotty cave in the face on likely THIS driver you built for him at the US Open?

Are there pro’s who request pure’ing or spine’ing shafts or are they all pretty much “I want the graphics aligned this way.”

Seems criminal to say swing weight and balance point are the most important part then not give us the swing weight...

Do these guys get new clubs every tournament or something?

why didn’t rory or tiger use them on thurs?

I want one

No shaft puring?

Does "45 cut" mean the shaft length is 45"?

Was this made for the WM

So where’s his driver he bloody won few weeks back ? Given / thrown away ?

Actually he just built my daily! 👍

6 wraps on a TV standard is crazy

Imagine having a contract requiring you to non-ironically say "fargiveness"

In this video he said it needed to be tipped. He never cut the tip end.

Colin seems particular about his grips lol

Where were the other 2 tapes?

Then I'm old enough to remember striking a match on my jeans.

I want 20 wraps 😂

The majority of people watching this video can't relate to it as they don't have a million-dollar tailor-made TaylorMade (!) tour truck at their local golf club! Let's talk about the stealth Stealth 2 retail pricing model, shall we?

So, 59° lie, is he in the “upright” setting? Any face angle adjustments? So many buzz-words…

Fine, I’ll buy one if you guys promise to never say “fargiveness” again

Woof

I can't belived he unironicaly said "Fargiveness" jesus christ

Y'all never talk about frequency in these shafts. I know your not just picking a shaft and tipping it 1". That would be how an amateur would build a club. I'm assuming behind the scenes y'all have every shaft pured and frequencied for each player. I'm not a pro but I can tell you if my shaft is 2-3 cycles too firm so I know those guys are even more sensitive to those numbers than I am. I've been building clubs for about 15 years now and a player with 114 mph club head speed needs a diff frequency than a 116mph club head speed. So just reaching into that drawers and pulling a shaft out is really leaving the viewers out of some really important stuff that goes on before those shaft are allowed to be put into those drawers.

Goodness me, sensitive creatures aren't they hahah

As if any club builder has a "Curing Oven"..

Mass production aren’t the club face and lying goes all the same answer no can the general public get a flat or Langell answer the question probably no

Build rorys like this one Maybe his doesn't have enough "fargivness" In his 🤣

Please, please stop saying "fargiveness". Sincerely, Everyone.

$800 for average Joe's. I'll pass.

Get rid of the music playing in the background, or at least turn it down. It’s too loud and competing with what he’s trying to say.

How dare you label me a casual golfer, I'm a player sucka

Fargiveness

This was over produced.

i'm out as soon as he said "maximize fargiveness", sorry

All good till the carbon fiber face breaks off

This is the most annoying guy in golf

Shame cheater is used with Taylor. Just saying.