Building Studded Tires for my Raptor 700

Подписаться 161 тыс.

Просмотров 24 тыс.

50% 1

In today's video I build a set of AMA legal studded tires for my Raptor. We had perfect weather and ice conditions. I'm super happy with how they turned out and I'm excited to have them for future ice rides or racing!
Our Website petehager.com/
2019 Yamaha Raptor 700 Special Edition-
Built Top End Dyno Tuned by Illinois Powersports (Call Jay for Details 630-365-6722)
Suspension Work by Rocket Ron www.rocketronracing.com/
Spider Graphix Kit www.spider-graphix.com/
Custom 9 Plate Clutch petehager.com/products/illino...
Rossier R5 Full Exhaust System petehager.com/products/rossie...
Fuel Customs Intake W/box
Power Commander 5
Houser Long Travel MX Arms petehager.com/products/copy-o...
Precision Elite Steering Stabilizer petehager.com/products/precis...
Precision Anti Vibe Clamps petehager.com/products/shock-...
Lonestar Adjustable Rear Axle
Pro Taper Contour Bars www.rockymountainatvmc.com/pa...
Urmosi Original Throttle petehager.com/products/urmosi...
DRW Case Saver petehager.com/products/drw-ca...
DRW Chain Slide petehager.com/products/drw-ch...
DRW Swingarm Plate petehager.com/products/drw-sw...
DRW Rotor Guard petehager.com/products/drw-ro...
DRW Sprocket Guard petehager.com/products/drw-re...
CRF Belly Skid www.glanninnovations.com/
ODI Lock on grips www.rockymountainatvmc.com/pa...
Streamline Front Brake Lines www.rockymountainatvmc.com/pa...
Hess Rear Linkage (by GT Thunder)
Pro Armor Bully front bumper
Pro Armor Nerf Bars
Alba Racing rear grab bar amzn.to/2FLPgmp
Alba Racing gas cap amzn.to/2FYuz5Y
Warning Plate Delete
Obor Advent Tires petehager.com/products/obor-t...
Restoquad Headlights restoquad.com/product/yamaha-...
Restoquad Street Legal Kit restoquad.com/product/restoqu...
Rigid SR-Series Pro 10" Light Bar (Spot/Drive Combo Beam Pattern) www.rigidindustries.com/sr-se...
Lonestar Universal 10" Light Bar Bracket lsracing.com/collections/yama...
Chapters
0:00-1:35 Intro
1:36-2:59 Stud Overview
3:00-4:34 Studding Timelapse
4:35-6:35 Weighing Tires
6:36-7:06 Tire Studding
7:07-8:30 Tire Covers
8:31-8:58 Front Tire Plan
8:59-9:48 Tire Studding
9:49-10:42 Build Finish
10:43-11:00 Website Ad
11:01-11:47 Tire Install
11:48-12:25 Ride Start
12:26-13:05 Music Edit
13:06-15:12 First Impressions
15:13-15:56 Ice Jump
15:57-17:09 Crazy Ice Donut
17:10-20:08 Filming Session
20:09-20:55 Ride End
20:56-22:33 Outro
Music Sourced Through Epidemic Sound
1st Song "Small World" by Sum It
2nd Song "Calamity" by Ballpoint
3rd Song "hounds" by Dream
4th Song "Replicants" by Hampus Naeselius
5th Song "Nuance" by Billo Boi
6th Song "Expliquer a Nouveau" by Rymdklang Soundtracks
Camera Gear-
Gopro Hero 11 amzn.to/3G6JoBI
Media Mod Link amzn.to/40SdBwl
Dual battery Charger Link amzn.to/40r5dE0
Motovlog Mic Purple Panda DISCOUNT LINK www.purplepandastore.com/prod...
Drone DJI Mini 3 Pro amzn.to/3os3hxf
3rd Person Filmed with Sony A6000 amzn.to/2XoVfWD
3rd Person Mic-Sony Zoom Microphone amzn.to/2Xtv6Wp
3rd Person Wind Muff- amzn.to/2x5Lluf
GoPro Hero 7 amzn.to/2MHvxVl
*Must purchase GoPro adapter to run microphone on HERO7* amzn.to/2SjdM3O
Follow Me On:
Instagram- / pete.hager
Facebook- / pete-hager-media-21519...
Strava- / strava
Links in the description are typically affiliate links. If you click on one and purchase, we’ll receive a small commission. This helps support our channel and allows us to continue making videos like this one! As always thank you very much for your support!
#savesportquads

Авто/Мото

Опубликовано:

24 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 96

@MichaelSabo 5 месяцев назад

At first I thought, "It would be cool to see how much weight the studs added," then you weighed them. Then I thought, "it would be cool to see the condition of the ice after ripping on it," and then you showed it lol. Very cool video and awesome shots/edits.

@Nomadic-Nerds 5 месяцев назад

Good contestants for the scale of doom!

@justinmochi7323 5 месяцев назад

Sabo always thinking about weight over here

@Mnsnowmoblieboys 5 месяцев назад

Loved the predator build I have one my self

@MichaelSabo 5 месяцев назад

@Mnsnowmoblieboys glad you enjoyed that series man; I miss that quad

@drewkuntz2174 5 месяцев назад

I ride my studded Outlaw on my local river. It’s basically like a frozen road course.

@JacksonOffroad25 5 месяцев назад

Literally perfect timing! Love checking RU-vid to see Pete posted 13 seconds ago lol looks like fun I’ll need to try it some day

@LandonShaw14 5 месяцев назад

The drone shot at 16:30 was phenomenal. Great work pete

@dakotaknight676 5 месяцев назад

That is sick haha I’d do something like what you did on my raptor, but we hardly get snow and ice where I live. Great video brother

@Jesiah-Rod88 5 месяцев назад

Pete, you’re so nice that when you said “I need a break from doing the tires” most people would have had a different choice in words 😂. great video, SICK SHOTS AND EDITING!!!

@shaneyoman8713 5 месяцев назад

Dude, nicks my best friend! Great guy to get advice from, basically all my videos are either him and I or him racing, glad to see you’re joining the ama stud gang!

@israelsalguero6126 Месяц назад

That looks awesome driving a four wheeler on ice

@foxpuremage 5 месяцев назад

That edit was sick 🔥

@hermanmuenster1405 5 месяцев назад

Dude, EPIC video. From the time you took to get the studs lined up when installed, to the awesome quality of video. Kick Ass😀

@timothykinsey6685 5 месяцев назад

Pete, Quad ice racer up here in Alaska, former, getting too old now. Advice...you don't need the nuts on the inside. I put them in my first set of tires I built, former champ told me a waste of time. Screws never came out, and usually take a week to leak down. Also, watch the Kold Kutters install video, you lean the screws back as you install them, so only one edge touch's the ice, both front and rear edge of screw on ice makes quad "skate" too much. Great corner speed comes from weighting the outside nerf as hard as you can, I would actually sit up off the seat about 1 inch and lift inside foot, pushing down outside foot, huge difference in speed. I made my own tire raps from old tires, cut sidewalls out, and cut the tire in half. Now you have 2 "C" shaped pieces, use 2 hose clamps to act as a hinge between them (much easier to install this way). And I used large copper wire to close and tighten them on the ice tires. NEVER let your screws touch anything but ice, they will dull on anything else, and you won't realize how much. If only racing ovals, you can stagger tire height left to right ALA sprint cars, incredible corner speed, but horrible starts if you wheelie off the line.

@leedimatteo5078 5 месяцев назад

killer wheelies man, def going right!!

@JBRAAPY 5 месяцев назад

This video and other ice video are my favorite...thank you for such great content!!!💯🔥👍🏼👍🏼

@bearkreekboys 5 месяцев назад

Enjoyed watching the studding process!

@KuyaBradford 5 месяцев назад

Sweet video! Thanks for sharing!

@Travis_Does_It_All 5 месяцев назад

Heck yeah! I used to do this on my dirtbike back in the day. Always worked like a champ. Salute!

@MnWarrior350 5 месяцев назад

This was so awesome to watch. Having just experienced the ice with studded tires, I was loving this video. Those drone shots were insane. I'll have to have you rip one of they boys Blasters with the studded tires next season.

@bigfootandbananaman4746 5 месяцев назад

That looks like fun

@trop1calsea716 5 месяцев назад

sweet pulls!

@edwardstroko4665 5 месяцев назад

I’d be scared as hell on ice but damn , sure would be fun!!!😎💪🇺🇸

@SQUARE1SpeedChannel 5 месяцев назад

Now I know where crop circles on ice come from. 😅

@PeteHager 5 месяцев назад

🤫😆

@AboutaMileAdventures 5 месяцев назад

My hand is cramping just watching this lol

@brokejokeratv5851 5 месяцев назад

I gotta alot of favorites but when it comes to RU-vid and atvs pete hager is a beast!!!!

@haphazard_lee 5 месяцев назад

Never a disappointing video Pete. Love the idea of you racing on ice.

@blessedinjax 5 месяцев назад

Good idea for a video and crazy nice air shot doin donuts on the ice

@bakermangaming2425 5 месяцев назад

awesome video man! i miss ice racing so much!

@jtyler7857 5 месяцев назад

Love it, a lot of patience needed studding those tires!

@PeteHager 5 месяцев назад

Whole project was like 12-13 hours of studding 🤪

@jtyler7857 5 месяцев назад

Wow I believe it!

@williamrowe9481 5 месяцев назад

Great vid fam

@Nomadic-Nerds 5 месяцев назад

That intro was sick! 🔥🔥

@Abeer-vn6yg 5 месяцев назад

ذ😂ي٠😊😊

@leedimatteo5078 5 месяцев назад

cool video man!!

@leedimatteo5078 5 месяцев назад

Killer intro man!!!

@aldyson3469 5 месяцев назад

You shold consider installing a kill swich cable. You ever happen to fall off while its in gear it wont stop rolling until it hists something hard enough to stall it out. Also most official race events will require you to have it

@PeteHager 5 месяцев назад

A tether is a good idea. I’ll have to look into that this season 👍

@aldyson3469 5 месяцев назад

@PeteHager they aren't hard to install. Also set up your rear suspension with the rebound setting as slow as it will go. And a lowering kit and wheel spacers will help. When you are going into a corner you want to lean over the side hard. I put my foot in the nerf bar net with my toes on the bar to keep the center of gravity low. And moto riding boots . If some how you foot lips thoes boots will jam between the perfect bars and studded wheel stalling the bike. Studded will rip through pants and work boots and snowmobile boots like a meat grinder. Good luck 👍 and have fun. Lpl

@Wheeler_Bros 5 месяцев назад

Now this we can never do lol. its never cold long enough in South Carolina. Snow maybe, but it wouldn't stick lol

@edwardstroko4665 5 месяцев назад

That’s a lot of work!!! But it’s cool!!!😎💪🇺🇸

@pookythomasmoto9147 5 месяцев назад

What GoPro and mic set-up are you rocking?? Awesome video.

@MT_Gorilla123 5 месяцев назад

Awsome!!

@bryce_t_u 5 месяцев назад

Can we all agree Pete’s edits are 🔥 nice tires btw Pete!! I’d love to know what editing software you use to tbh!

@PeteHager 5 месяцев назад

Thanks man! I edit with Final Cut Pro on an iMac 👍

@bryce_t_u 5 месяцев назад

@@PeteHager that’s awesome Pete love the content as always! You’ve been a huge inspiration of mine to post videos of my raptor so thank you dude seriously I’m very appreciative of you and the content!! Love how supportive and humble you are towards everyone keep it up man!! Thanks again

@gipper222zk7 Месяц назад

@PeteHager Hey bro, I just bought a new "2024 Yamaha Raptor 700R SE 69th Anniversary Edition" it has the GYTR front grab bar, rear grab bar, front & back GYTR Suspension, & the big bore kit, & more that all came stock with the SE version, AKA= Special Edition. But I am definitely gonna put a "FAST FLEX HANDLEBAR" on it, but i also wanted to put a new full exhaust & a new full intake, & obviously when you pit a new intake & exhaust on pretty much everything you will definitely want to get it tuned, but this baby only has less than 1 mile on it, so i don't know if I should wait for the 10-20hours of the break in period then put the new exhaust, intake, & tune, before I break it in, or afterwards??? Any help would be greatly appreciated, even brands that would be best for this specific bike, which because it is a "2024 Yamaha Raptor 700R SE 69th Anniversary Edition" I don't even know if anyone has created a exhaust, intake, & ect... for this because its brand new off the showroom floor at the dealership, its just so new that even the lucky people who got w chance to but one they are keeping it completely stock, & not doing anything to it, but i already knew that I was going to make it at least 50+ inches wide, & at least an extra 6-8 inches longer, & then the "Fast Flex Bars" & the exhaust, intake, & tune, but this is the first brand new bike ive ever bought, i used to just buy slightly used quads, bikes, sleds, etc but I don't know if i should add the intake & exhaust, & tune before or after the 10-20hours of the break in period, so any help would be greatly appreciated please & thank you!!!

@danielhansen377 5 месяцев назад

Sick 🤟🤟

@Raptor700LV 5 месяцев назад

I agree that too many studs are no good😅. Then you can't play on ice like that and for example do a 360 on a high speed.

@NWO-Off-Road 5 месяцев назад

Awesome edits as usual! I dont even want to know how long those tires took you 😂

@PeteHager 5 месяцев назад

Like 12 hours to do all 4. Each rear was like 3.5-4 hours 😅

@NWO-Off-Road 5 месяцев назад

@@PeteHager my guess was a full weekend in the garage, so basically 😂

@jacksonhammersmith 5 месяцев назад

Are your gold wheels just stock powder coated or where did you get them?

@OdysseyOffroad 5 месяцев назад

That is so nuts! Looks fun, how thick is that ice?

@PeteHager 5 месяцев назад

It was about 12 inches thick everywhere when this was filmed. It was trippy to ride on at times 😅

@keithmurray8249 5 месяцев назад

Love it🤣🤣 Pete Do you have a link to those Nerf Bars that will fit with the GYTR Heel Guards? Cheers Bro!

@PeteHager 5 месяцев назад

Unfortunately I’m not sure if they’re available anymore. I special ordered them through ATVgalaxy 5 years ago. I would check with them. Otherwise the actual GYTR nerfs are really nice and fit perfectly with the aluminum heel guards 👍

@keithmurray8249 5 месяцев назад

@@PeteHager Great Cheers for the info Pete much appreciated Mate👍👍

@PeteHager 5 месяцев назад

@@keithmurray8249 I did read a post the other day saying the powdercoat on the GYTR nerfs isn’t the best. If I bought a set I would probably get them recoated locally. Kinda of a bummer but they fit the frame/heel guard contours nicely 👍

@keithmurray8249 5 месяцев назад

So Glad I read this now Pete as I was about to get them, they were in my cart!! not a great selection for anything here in oz for Sport ATV's I get everything from the States, thanks so much for the feedback and see u in your next Video Bro🤘

@emilianomijares7464 5 месяцев назад

I hope you get 200k subs

@Vazerin 4 месяца назад

Hey Pete I ordered a TRX250X case saver off your channel but haven't heard anything on it for a week, is something going on with DRW?

@PeteHager 4 месяца назад

Unfortunately DRW has had some production issues this past month and they’re a little behind. I was told case savers are being cut today. For future updates don’t hesitate to reach out on our websites contact page 👍

@strix_-.5885 4 месяца назад

what pipe is that??

@MasonNeerhof-mg5sj 5 месяцев назад

Love ur vidoes and ur quad Pete lmk when y want to sell ur raptor it would help a dream of mine to own that machine

@PeteHager 5 месяцев назад

I can’t see myself parting ways with it anytime soon. There’s a lot of history on that machine 😅😁

@MasonNeerhof-mg5sj 5 месяцев назад

@@PeteHager totally understand man but hey when the time comes if u ever want to I’ll be more then willing but other then that keep up the great content

@fearoshima666 2 месяца назад

Whats the topspeed of your quad (Raptor700) on the road @Pete Hager

@PeteHager 2 месяца назад

With the 15 tooth front sprocket the Dyno forecasted the top speed to be in the low 90's. I'm pretty sure I still have the speed limiter active on mine though. I've had it up to the low 80's on the pavement

@fearoshima666 2 месяца назад

@PeteHager I'm also going to get a raptor, but I want to make it so that it stands on its wheels the same as a YFZ 450 so that it doesn't tip over so quickly, do you happen to know what I need to change?

@tylermiller3484 5 месяцев назад

Why dont you ride the yfz much anymore ?

@PeteHager 5 месяцев назад

I actually sold the YFZ. Now that I’ve upgraded the raptors suspension it has become the ultimate do it all machine for me. The only time I really preferred the YFZ was on a track or hitting bigger jumps. I’d like to replace it with a 2 stroke eventually🤘

@____MC____ 5 месяцев назад

Do you have to tire slime those after?

@PeteHager 5 месяцев назад

Nope, from what I read it sounds like most guys don’t put any sealants in their tires

@SzpinoATV 5 месяцев назад

😎👌

@aaronproctor24 5 месяцев назад

Did the tires leak air at all?

@PeteHager 5 месяцев назад

They seem to hold air just fine for a days worth of riding 👍

@jameslachance9107 5 месяцев назад

Whats your summer tires pete

@PeteHager 5 месяцев назад

I’ve been running Obor Advents the last 2 seasons 👍

@thenarrowpathatvchannel4316 5 месяцев назад

How thick does that ice have to be for you to ride safely on it?

@user-zy5ld2hy8c 5 месяцев назад

5-7 inches don't put a machine on it if it is any less

@thenarrowpathatvchannel4316 5 месяцев назад

@@user-zy5ld2hy8c thx for answering.

@do1yourself762 5 месяцев назад

😘

@anonymous-tn6ij 5 месяцев назад

5:02 what’s whole nother

@PeteHager 5 месяцев назад

Whole nother tire** Its code for “I have another tire to stud” 😉

@Chris-cx6qi 4 месяца назад

'promo sm'

@bearkreekboys 5 месяцев назад

Hey pete! Would u consider sharing our channel? Hope your doing well!

@solti1814 5 месяцев назад

We want kilograms no lbs shit

@____MC____ 5 месяцев назад

Wtf is a kilometagram?

@PeteHager 5 месяцев назад

You’re not gonna believe this but there’s a search engine called Google that will convert measurements and weights for you. It’s crazy. You just type in 19.2 lbs to kg and it tells you 8.709 kilograms. You should try it sometime 👌

@user-us6cq6zb2i 5 месяцев назад

Hey Pete, just have a question I got a raptor and don’t have enough for a new pipe if I remove the spark arrestor and leave the air box on will the bike get hotter or will any harm at all happen I’ve seen mixed answers and not sure thank you.

@PeteHager 5 месяцев назад

You should be okay to pull the spark arrestor. You could always look into getting a HMF or Yoshimura slip on instead of a full system to save a few dollars. Technically I’ve seen people riding without programmers and slip on exhausts but I recommend saving for a power commander to insure the quad runs properly 👍