No video :(

Building the RC model airplane every body loved (YOU VOTED - I BUILT IT)

Подписаться 191 тыс.

Просмотров 48 тыс.

50% 1

The biplane is taken from a plan included in the RCM&E magazine, issue April 2019 (link below). The model is called "Weekend Wren" By Tom Van Musteren. A small rc model that looks like a project that will only take a week of work, with only 425 mm of wingspan is almost a micro rc airplane.
Watch the Maiden Flight: • Balsa Wood Constructio...
Download the plan here: bit.ly/2Ytsnvi
You can also download the glider that didn't win: bit.ly/2NJM2Vv
Get news to your email: joyplanes.com/...
Join our Discord server: / discord
About this project:
Time to build it: 1 week
Materials: Classic balsa wood, plywood and covering construction.
Channels: 3, Ailerons, elevator and motor.
Wingspan: 425 mm.
Weight: 225g
I used UHU HART and CA + Accelerator glues
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
Electronic Components:
Micro receiver for Frsky www.banggood.c...
Micro receiver for Flysky www.banggood.c...
Micro servos www.banggood.c...
3S 500 mAh Battery www.motionrc.c...
Laser cutter and engraver www.banggood.c...
The poll results • Post
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
Website
joyplanes.com/
Become one of us:
goo.gl/zKQ706
Facebook
/ joyplanesrc
Instagram
/ joyplanes
#JoyplanesRC #HobbyRC

Опубликовано:

25 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 89

@C.B... Месяц назад

To make the Zaunkönig (wren) electric is a criminal sacrilege! 😮 It was developed in the 1970s bei the members of the Swiss Simprop Team. It was to perform with a 0.048 cox engine. Imagine the Sound when there are 10 Cox in the Air.

@sajalacharjee7008 3 года назад

It will be great fun to watch the next part.

@volkerlisiewicz3801 3 года назад

Thanks for the inspiration. This model is very much like the german "Zaunkönig" I've built as a teen back in the 80's. After watching your video I ordered a kit to build it again, this time with an electric motor instead of a Cox Babe Bee.

@afrog2666 7 месяцев назад

I downloaded plans to build it, it`s on my agenda for next spring (:

@LuisSanchez-bp8bc 3 года назад

your creation is very original JOY and it is very relaxing to hear your voice in two languages,greetings from Mexico👍✈️🇲🇽

@racnc1 3 года назад

Usually on small planes like this one I like to cover the bottom of the plane white helps with the orientation when it’s up in the sky. As for the heat shrink tube that also works great with electric biplane ailerons. Great info. Now let’s build and extra 300.

@thomaswalsh476 3 года назад

It looks like the laser is really far away from the wood. The further the light has to travel the less power it can deliver due to air losses. The head does not look height adjustable so, put something under the balsa. Increasing air movement will decrease burning, which improves cut depth because the energy is not spent on the vaporizing gases and particulates. Balance lower power and multiple passes to combat any remaining burn and lack of depth cut.

@Joyplanes 3 года назад

Thank you for the advise!

@asifheliRC 3 года назад

Beautiful model. Nicely designed and suscribed.

@calebbradbury7166 3 года назад

That’s awesome! Can’t wait to see it fly

@afrog2666 7 месяцев назад

Back in the day, when I just had started doing scratch builds, the Zaunkönig was the plane I wanted to get, but just assumed I was going to crash hehe 😆

@TegoSuwarto 3 года назад

Good

@vincentdevries8858 3 года назад

Zaunkönig for the poor man with mirror shine overlapping foil ..... sorry, ok i know why i am a big fan from old japan paper or silk and shellac laque covering tecnique. But from 10m away or on a 6inch display it looks accuratly and perfect .Sorry for my broken english , im german . And for that i cant hold bach my feelings.

@antonis476 3 года назад

so satisfying to watch

@yotehunter3468 Год назад

Beautiful work...

@theinkmen6177 3 года назад

We want a video how to make the laser

@babumohan4549 3 года назад

dear joy,your way of explanation is nice. love you and your bi plane.respect your hardwork.cheers from salem,india.

@Joyplanes 3 года назад

Thanks a lot

@Jakob-hj8es 3 года назад

I've voted for the other plane but i also like this plane. I find it great that the community can decide a little bit, what videos they wanted to see. Very nice video

@Joyplanes 3 года назад

Cheers!

@dohobbies4482 3 года назад

Graet video.. I'm Brazil ...i love RC airplane thanks to teach👏👏👏👍👍👍🙏🙏🙏🇧🇷🇧🇷🇧🇷

@trouserfish9178 3 года назад

The Zaunkönig from Simprop. My first model in 1979.😃☺️

@CaptainFishbones Год назад

Big motor for such a small plane! I think I'd be tempted to down size a bit.

@HarishKumar-qh8ue 3 года назад

Your videos are so professional.iam very lucky to find this chennal. From india 🇮🇳❤️

@abdullahafzal9 3 года назад

Can u make a video on the laser cutter Most of us don't have access to it so building one is a good idea

@normaal4663 3 года назад

This looks like a deritive from the Simprop Zaunkönig i have build and flown decades ago with a cox 049 on it. Small plane , big fun....

@Joyplanes 3 года назад

Yes I think it was modified to be electric.

@keithrobinson870 Год назад

Looks good

@RcAircraft 3 года назад

Nice build video, Hope the Maiden goes well. Cheers.

@Joyplanes 3 года назад

Yes, you'll see it today.

@zackcb1025 3 года назад

Cant wait to see it fly! Ya llevo dos Joytrainer mini... :)

@Joyplanes 3 года назад

Hope you enjoy it!

@krotchlickmeugh627 3 года назад

Next time use windex to bend the wood.

@legot.k8772 3 года назад

It's an amazing video

@masbeetleboy9169 3 года назад

Nice build, even though it is a bit complicated.

@BatanShorts 3 года назад

Awesome

@ashvanths1581 2 года назад

cute little plane sir, but can you build it using materials like foam cuz many of us have not grown up to balsa wood, laser cutting

@SMQ_90 2 года назад

your videos is really a source of aspiration for RC lovers. i got motivated and design red sesna. its fly well but no wheel installed. will show you the video. the problem only is to make a fine edge on wings.

@m.s.aviation7065 3 года назад

Man it looks great!!! I watched the flight video and wow! That thing looks like it flies nice. Oh btw, where do you get your exactos? I've been looking for some good ones and yours look pretty nice

@minetubequest 2 года назад

Imma use foamboard instead of plywood. Will it still be maneuverable????

@b.w.oostdam8875 2 года назад

To easily bend balsa wood and make it stay in the shape you want, the best method is to soak in water with amonia.

@user-lh4dr4wf5i 3 года назад

Can you please tell us What motors did you used to control the elivater and the flaps?

@maverick569 4 месяца назад

can you share the plan? The download link isn't working!

@glyndowning3076 3 года назад

I still have the original Simprop Wren (Zaunkoenig)kit

@suvarajbiswas 3 месяца назад

Sir, the plan is not downloadable can you please help

@premierymasyt7083 3 года назад

Joy good job nice 💪

@Joyplanes 3 года назад

Thank you! 😃

@Roberto.Martini Год назад

wat lazer cutter do you use

@truckerray7533 3 года назад

Nice video & job well done on your R/C model. How does that little iron thing work at putting on the skin???

@syadandiadhr 3 года назад

Nicee

@tateranus4365 3 года назад

you could have cut that thicker piece of wood with a harbor freight junk jigsaw, it is probably only going to last for a job or 2 but it is only like 40$ so it ain't too bad. a miter box would probably remove too much wood from the piece and be overkill, also i wouldn't mind seeing a video on your laser cutter

@ARMY_RUGS 2 года назад

Where do I buy this plan pls ?

@mb_9192 3 года назад

Nice work Which remote controller u used for that plan

@rcpilot5045 3 года назад

Great build. Do you think the bipe could be built from 3mm foam with plywood reinforcements?

@Joyplanes 3 года назад

I think it's possible.

@atikalmustahid4057 3 года назад

Can you please tell me details about the polythene type material that you have used to cover the wing and fuselage? Thanks

@Joyplanes 3 года назад

There are several brands, called Monokote, Solarfilm, Oracover, etc.

@atikalmustahid4057 3 года назад

@@Joyplanes thanks a lot

@demotulation 3 года назад

Don't forget to tell us how much it cost (materials) approximately.

@Joyplanes 3 года назад

Well I think it is about $50 in total but just an estimation.

@ENITech 3 года назад

😍🥰😘

@syadandiadhr 3 года назад

Sir i have question, which type of foam board is suitable for aeromodelling: pvc foamboard, kd foam board or white paper foam board?

@Joyplanes 3 года назад

There are many foams that can be used, but depending on the type requires a different technique. I like foam board.

@syadandiadhr 3 года назад

@@Joyplanes thank you sir for the answer

@jalalhaider83 3 года назад

Nice effort and majority is authority, RC hobby is always expensive unless someone come up with cheap ideas for beginners, all those who vouch for it better get laser cutting machine and later get balsa wood and then sit to make(general comments), anyways 👍

@josedavidbanegasalpiri7953 3 года назад

Ya lo subiste a tu otra cuenta el video

@emanuelcosma8329 3 года назад

what size motor did you mount?

@Joyplanes 3 года назад

It's a 2205 2300KV

@st3v3nk3 3 года назад

What motor did you used to it? :) Can i get exact parameters? :)

@CaptainFishbones Год назад

It was a 2204 on the plans, which is pretty huge since the plane weighs 225g.

@dharmeshpanchal4324 3 года назад

How much rs

@akbarmaulana936 3 года назад

Are the plans free?

@Joyplanes 3 года назад

Yes, look at the description, just create an account in Joyplanes or simply join the discord community and you'll have the plans there too.

@josedavidbanegasalpiri7953 3 года назад

Hola joy primero

@LuisSanchez-bp8bc 3 года назад

el segundo

@josedavidbanegasalpiri7953 3 года назад

Este video me refiero

@wjsbruwer8206 3 года назад

I also built a biplane but it never flew

@jurgenblick5491 3 года назад

Your links have malware

@meunomeeplissken3088 3 года назад

ALL have a wife not me .

@robn2497 3 года назад

please bother to calibrate

@TheYHoernchen 2 года назад

"your creation is very original..."Ha Ha Ha...this is a copy of the German "Zaunkönig" from Simprop. It's a shame that this fact is not mentioned, but it has always been easier to adorn yourself with foreign feathers

@Joyplanes 2 года назад

I never said this was my creation... maybe you need to start reading the descriptions of the videos you watch.

@tateranus4365 3 года назад

i wonder if it would be "supporting neo nazis" if he made a fokker eindecer triplane from ww1