Hey guys, I've been following your chanel for about 5 years now and have never missed an upload. Needless to say, I love what you do and watching your vides has inspired me to start fabricating myself. Can't give you guys enough props for that. However, If there is one thing which bugs me, it's the fact that you tend to hop onto new projects super quickly while there is an ever growing heap of unfinished builds which we often never hear anything from again. I fully understand that some projects get dropped, either because it just isn't turning out the way you had hoped, or maybe it just doesn't gather enough clicks, or Ethan's ADHD kicks in... But for me, it has come to a point where your yard is starting to look more and more like a graveyard for abandoned ideas and that makes me sad. But then again, I'm just a bloke behind a PC halfway arouind the world so do what yuou want. Peace out, hope you keep going for plenty of years
@@xpndblhero5170 the comment is still correct.... that load was nothing as far as lifting n the capacity of the rig . Understand if a hydraulic crane weeps it red flag n not used....the acceptable amount of weep or creep is exactly zero
His idea for independent steering wheels on each side is brilliant. Make it super funny by throwing in separate pedals for each side so each homie controls their side with their own engine and direction of power. Would be cool either way to see you give Patrick a welder and get him in videos more he’s great.
hello my name is William and i love your content and i just wanted to ask if you needed help. id move up there and work for free with room and board. I'm struggling and need a change. I can turn a wrench and im really good with electronics. plus i love dogs and drones, grew up riding a cr80r as my first dirt bike then a cbr600 as my first vehicle. if you would be willing id be seriously willing. again thanks for the content guys
As an old jet ski fanatic I’d recommend vacuum testing the engines so you know they don’t leak air making the tuning process a lot easier and not always chasing making them run right.
Yes leaking crank seals can cause a lean condition & burned holes pistons . Check all fuel lines for leaks and those rave valves should be cleaned & adjusted properly. Used to radar run my Mach 1 years ago and that's part of keeping them tuned up and running hard .
Thats a c-130 with a Modular Airborne FireFighting System (MAFFS) used to assist/augment forest fire crews by dispersing phos-chek/water/retardants. We started a ton of range fires during the summer and they had one stationed at the airbase nearby. Watching it deploy the entire payload with accuracy is really impressive - you wouldnt think such a massive cargo plane could move that quick or turn as steep and as fast as it does… its a whole different story riding in one when flying in or out of a combat zone!!
its from the ppl that throws cars off the cliff thats near them they were having a show with a bunch of ppl, surprised they dont know about it ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-T8MsMHGVR1U.html if you click through the video youll see the plane doing low fly bys
I like how you decided to swim after it. I could see you change your mind about it several times like, “should I? But I can’t swim that fast… But I should at least try. But it’s a jet ski. But I can’t just stay out here in the middle of the lake…”
One time I had a tether snap, but I was lucky enough that it turned and came back to me where I could pull the key. I was also lucky because I was in the middle of a big lake with a lot of big boats so it's a good thing I wasn't stranded.
wow, another great build, cant wait to see it finished. Would also like to see more power wheels going around the track you built before it start snowing and maybe some builds around the track to get some racing going on it.
Definitely enjoying the...revised...lineup, guys. Back to the feel of show that got me hooked from bicycle-treehouse-elevators. (We didn't need yet another channel of keen young blokes with enthusiasm and no clues.) Looking forward to your future projects.
Now you all can race ole' Cleeter. Dude destroyed his MTN Dew jetboat on the rapids, but it looked so worth it. I'm all here for the jetboat content. 👍
I've been waiting a few years for someone to do build twin side by side engines for a mini jet boat. If the Offshore big boats can do, so can one using a mini. I picture a little bit bigger mini with Twin supercharged Rotax motors on dual thrust outlets.
Some Advice on those Rotax's Keep the injection pump! the Rave valve needs the lube, But just toss a little bit of oil the fuel too. And yes thats a WestCoast Head on the one, has interchangeable Domes for Comp, and orings seals that needs to be replaced if you dig into it. Cheers like this one!
Remember, it used to be called "Starboard" and "Larboard", "starboard" references the side the boat is steered from, literally came from "steer-board" as it used to be a board lashed to the side to steer from. "Larboard" is the load board side, where you'd load and unload the boat, or now it's just called the port side. Larboard starts with L so that's easy to remember as Left
@@franmcgowan4068 i was taught a little saying that always stuck with me "There's no more Red Port Left in the bottle." covers the red/green markers too that way
The mini jet boat needs to be re-wrapped! Excellent video as usual! As a suggestion, when mounting the engines, use a single jet, with a chain driven drive shaft. The engines could point opposite directions, so the inlets are both on the middle and the exhausts to the outside.
So rad hearing about Fireball Tool, since I got hooked with so many of their projects, and now being pretty much every week waiting for your content, it's awesome to see both of you guys crossing paths.
That's what I'm saying It would be super cool because Because you can do a quadrunner half where it's got wheels and it doesn't float anymore or you could do both where it has wheels and can still float and drive in the water.
Edwin, that was an interesting spill. Looked educational too!! I don't tell you often enough how much your love for Idaho's outdoors shows, even when you only edit.
Lmao I swear I thought that green gremlin was the evil toe fungus guy from the Lamisil commercials back in the day, either that or the mucinex mucus monster
I'm such a 13 year old. Sitting here chuckling about homie saying that we really don't know how it runs until it has a load on it. Shit. Lol. Love you guys.
Like I said last week.... If you need seadoo help I'm your guy. The mpem is bad there was no reason to go into the mag housing...and it looks like you got a crappy sbt rebuilt motor in the one. The modded one in the other hand that pipe is worth 500+, the sponsons are worth 200. Lol and I programmed the key for that replacement box you bought.
As the drone flew overhead helpless..I recalled a scene from the 5th Element with the monk asking Zorg if he thought his little toys and creations were of any use as Zorg choked on a cherry.😂😂 Love the episode! Great work.
Huge fan, longtime viewer, even live really close to you guys! With that being said, I do not miss Will as much as I thought I was going to! Not trying to shit on him, but after viewing his new content I feel like your guys style inspires me to get out in the shop and work on my projects And again, no hate just my opinion
Patrick is a good replacement for Will. Smart, funny and professional. Will can just keep trespassing on private properties, and build ugly machines, while GrindHard builds cool machines on their own property 👍
Will is a young buck, making his own way. One has to respect the hustle. You might not like his content, but the kid has talent. Ethan thought him well.
Didn’t think I’d say this but this show is definitely more premium without Will. I think it was a good call for him to go on his own to do what he wants, not hearing places you can even walk for the Billionth time each episode is nice. Pat would definitely be a good addition
Pretty cool that you guys got a Fireball Tools fixture table. I started watching both of your channels about the same time. I'm thinking a collaboration is in order.
Cletus McFarland has the micro boats also! He has videos of them thrashing those poor things. Awesome. Can't wait to see what you all come up with. Thanks Ray
Ive been working on boats for 20+ years and still to remember Port vs Starboard, i remember that "starboard" and "right" are the same because they both have more letters than "left" and "port"
At the moment the only youtube channel im looking forward too! Cant wait for new videos guys! You inspired me to keep on going with my own projects that are sitting for way to long.
Think steer-board instead of starbaord.. the word derives from ships having a steering board on the right side, therefore they had to dock with the left side to port, so not to wreck the steering board (before rudders where a thing)
Ok, paint me in envy because you got 2 things now that id love to have, a jet stream jet boat and a fireball fab table. The boats are probly the best adult man toys on the market and the table is a fabricators dream.
@@bz938 @FireballTool is a scam company. They are the worst. Product is subpar. Customer service is nonexistant. It's just a scam to steal money from gullible viewers who want to be part of the team. Never buy anything from them. SCAM!
I am so glad you guys got a fireball tool welding table. I can’t wait to see future videos and projects of the table. I am looking myself to buy his smallest one. I am just a guy in a garage welding shit.
you should style the throttle after a multi-engine airplane throttle, that way you can easily control both at once or have differential thrust for sharper turning. or simply have a right and left hand throttles.
Love watching y’all’s channel. I hope Will is OK. I haven’t seen him in a video in over a month or so. I hope everything is so great love watching y’all build and have a blessed one.
Someone definitely raced that ski. Umi controls, beach house sponsons, west coast head, spec 2 factory pipe, R&D flame arrestors… that engine has so much more power than the other. I’m very interested to see how that affects the ski. I would look into finding another spec 2 pipe, they really wake them up. Rebuild the carbs and ONLY USE OEM MIKUNI kits. Looking forward to this build!
19:23 turn the hull into a motorcycle or dirt bike. 😅 I would love to see that. I totally wanna do that one day!!!!! Also in winter …. You have to try it after the summer.
I almost knew when you said I got a new fab table that you got one from Fireball Tool. Those things are so awesome, wish my shop had one. I'm also jealous of the scenery on that lake in Idaho, that is beautiful.