Built a Volts Mini bikes GTS bike and this happened!

Подписаться 71 тыс.

Просмотров 22 тыс.

50% 1

Built a Volts Mini bikes GTS bike and this happened!
Built a Volts minibikes GTS mini bike using a Predator 224 along with a
3D chain guard along with an ARC billet rod and side cover and various other parts.
212 Ghost kart racing engine playlist - • 212 Ghost VS 206 Brigg...
Mega moto e-bike playlist - • Raced the QS120 e-bike...
Predator 224 playlist - • Predator 224 gets a 26...
Mega moto performance playlist - • Mega Moto 80/105 unbox...
Bonanza minibike playlist - • 1.3 ratio rockers vers...
Coleman cc100x Predator 212 playlist - • Free Predator 212 perf...
Road rebel go kart playlist - • Kart vs scare chair / ...
Coleman cc100x/DB003 minibike micro bike playlist - • Will a Trumpet exhaust...
Coleman cc100x playlist - • Coleman CC100x Minibik...
Doodlebug playlist - • Is the Doodlebug minib...
Coleman CT200U-EX playlist - • Coleman CT200U EX mini...
Azusa minibike playlist - • Is a Ghost faster with...
D motorsports chain guard, ARC billet rod and side cover Coleman CT200U playlist - • Coleman CT200U minibik...
Predator /Tillotson playlist - • Free Predator 212 perf...
Minibike playlist - • Mega Moto 212 goes 60 ...
Subscribe for more minibike content: ru-vid.comfea...
Instagram - Doubledown555Black66
_________________________________________________________________________________
Parts used -
GTS frame - voltsminibikes.com/products/v...
ARC billet side cover - voltsminibikes.com/products/b...
Billet valve cover - www.ebay.com/itm/175457532031
PWK 28MM carburetor - voltsminibikes.com/products/p...
Predator 224 Billet rod and piston - www.ombwarehouse.com/predator...
Throttle - voltsminibikes.com/products/1...
Throttle Blue aluminum - www.amazon.com/dp/B07SSX6F4L?...
Oil catch can - voltsminibikes.com/products/o...
Seat - voltsminibikes.com/products/p...
Tri star wheels 5 in - voltsminibikes.com/products/t...
Sprocket hub - voltsminibikes.com/products/s...
Sprocket 35 - voltsminibikes.com/products/s...
Footpeg covers - www.ebay.com/itm/251245181236
vent line clamps - www.ebay.com/itm/313668996710...
Gas tank - www.ebay.com/itm/175506551332
Catch can mount - www.ebay.com/itm/175433073335
Cable clamps - www.amazon.com/dp/B079Z9NP55?...
Axle - www.gopowersports.com/5-8-min...
Don't forget to leave a comment to let me know if you enjoyed this video! :)
*********Disclaimer*********
Please do not try to re-enact or recreate anything you see in these videos.
Black66 does not take any responsibility for injuries or equipment failure created by doing so.
ALL BLACK66 CONTENT IS FOR ENTERTAINMENT PURPOSES ONLY.

Опубликовано:

3 мар 2023

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 128

@miguelpagansr6128 Год назад

I like it looks sick, I hope it’s just as fast as it looks.

@hsojettedrub3821 Год назад

Knowing his builds, most likely is.

@undagroundhustla Год назад

I'm envious of your tool collection, absolutely everything you need on hand and ready..👍🏼

@fuckingbasterds Год назад

I like it! Powder coated blue and chrome, gonna be fast!

@shrugger1 Год назад

WEW! Good save with the tank mounts.

@xsrudy782 Год назад

Finally you get a gts 😂 looks bad ass tho 💪🏽🔥

@Spacecruizer203 Год назад

BIG SHOUT OUT TO THIS MAN KEEPING THE DREAM ALIVE💯✨✨

@rodricbeauregard1053 10 месяцев назад

I love minibikes,but i do not dream about them,i ride them! Peace

@jupiterjack2672 Год назад

Hopefully 🙏 they send mine sometime this week to Philly 😢😢 ⏳⏳⏰ sometime this week

@colemantrailslayer Год назад

Ur videos really help my builds , Thank you.

@Black66 Год назад

Thanks for watching!

@dannymccullagh8211 Год назад

Great job my favorite build along with the e bikesa!

@NVScrapper Год назад

Cool Volts Mini bike build. I really like the color to. Can't wait to see part 2 for the finished product. 💯💯

@gregswafford9839 Год назад

Looks great, looks like its going to be a runner.

@denomtrax1 Год назад

I need one of those ! Like before the summer kind of need one of those ...that's how bad I need one of those ...holy shyyt that may be ur best build yet

@Black66 Год назад

Thanks! It could be the best yet... Check out part two on Saturday. It came out pretty sweet!

@denomtrax1 Год назад

Yea man I follow volts and them too the minibike scene is not as extreme here in chicago but a bike like that will turn heads anywhere

@cole7750 Год назад

That’s a nice bike your putting together

@BustedKnucklesBuildsTexas Год назад

Love that frame ! Bike is looking good !

@rodricbeauregard1053 10 месяцев назад

Thats a lil over the top man, keeping the dream alive? Dude?😊

@rodricbeauregard1053 10 месяцев назад

Right?

@RhiceyHarierar Год назад

Ok. I got two builds that will be done next week. Im thinking of getting a pred 459 and gutting it and making a sick build. You should do a big block build man that would be cool, esp on a volts frame

@GILSJOURNEY 5 месяцев назад

I really enjoyed this video.

@squirllbait212 Год назад

Amazing videos as always. That's a really nice bike! I just ordered the mega moto bike with the Tillotson 212, and 28mm nibbi carb. Cant wait to hit the hualapai trails!

@dannymccullagh8211 Год назад

Did you get thr mega 80 or thr larger one?

@squirllbait212 Год назад

@@dannymccullagh8211 I got the mega moto 212. The bigger one 👍

@predator_boiz336 Год назад

I wish we had these frames here in NC 😭 I want a GTS frame with volts handbars soo bad man 😭😭 it’s soo much to ship one to the east coast though

@jackdaniel2047 Год назад

Dudes bike that you talked about st the beginning and yours both look absolutely 💯 amazing and nice 👌 great job

@Black66 Год назад

Thanks! Check out the second part of the build on Saturday.

@rachalhollier5679 Год назад

Awesome build. Instead of a catch can, you should run an inline one way valve,& a filter mounted behind the gas tank. That engine will have more velocity and that means more power

@darrellnichter9894 Год назад

Sweet looking bike!

@boostedeghb Год назад

Bike looks sick man. Can't wait to see it go. And I know you'll have a high lift cam in it in no time since it's YOU and it's a Cali style bike lol Would be cool as hell to get you out here in east Tennessee to ride in the mountains with us. High speeds on the road is fun and all but ripping the trails in the Smokey Mountains is such a rush. Borderline addicting lol. Could show up all the four wheelers with us lol 😆 Till then, keep up the good work as always

@Black66 Год назад

Thanks! It would be fun to ride out there. Maybe one day I will make it .

@jaystrappa Год назад

I will say those check valves dont hold up. After a few rides see how hard it is to blow through it, they need to make a more free moving valve. Wicked bike man! 🤘🏽

@gavinfalesyt 11 месяцев назад

hey black I really liked your build with the volts bars and gts frame so I saved up and bought one for my predator 212 and I was wondering what size and or where you got the rear bolt for the tire. I orded studded tires and I realized that the bolt is not the same size in the front than it is in the back and I was wondering where you got or what size it is because I dont know where to get one that would fit and I have already looked in my local hardware stores but no one had the right size. I really liked this build keep it up!! (I am asking again because I really need your help.)

@johnconroy9555 Год назад

Matey that's gonna be a demon looks cherry.cant wait till it's finished... John..Australia 😊

@Black66 Год назад

👍👍

@Theminimechanic Год назад

I can’t wait to see that thing rip

@davidwinkleblack5587 Год назад

Awesome 😊

@rexs8058 Год назад

Sick

@Strict30 9 месяцев назад

How did you mount seat with just holes in the bottom of seat?

@4links4fun66 10 месяцев назад

Where are you getting the predator to 28mm carb adapter from?

@Xstreamaudio Год назад

Love it

@racetherapy Год назад

Where did you get the rest of the part, catch can, tank throttle grips?

@scottwiley Год назад

Does the steering neck have a bushing, or metal to metal with the forks?

@jupiterjack2672 Год назад

🔥🔥🔥🔥

@predator_boiz336 Год назад

This is my favorite frame hands down, I want one soo bad but it would cost about $800 to get one shipped to NC

@hsojettedrub3821 Год назад

Looks bad ass 🦾

@TheJacksons521 Год назад

Very nice

@JesusOkc 7 месяцев назад

What paint is that you use as spray paint

@sabian356 Год назад

What sizes are the front and rear axles?

@davidoliver2958 11 месяцев назад

How fast does the mini bikes ship from volt ? I’m in mo n it says 5-8 business days n that seems a lil early from Cali is the shipping fast or take forever ? I’ve heard both and I want one and I’m just wondering

@racetherapy 11 месяцев назад

What is the AN size for the blue vent tube clamps? I also got the Chain guard the other day. It’s red, I’ll redo in purple. Thanks again

@ItsFreshDough Год назад

What size vent tubing?

@memfusboi Год назад

They make mounts for talks that won't scratch your paint

@albertmichall5732 Год назад

Sweet

@jeroldlafferty54 Год назад

That ahda be good for 5mph lol. It already looks fast .Show and Go Baby!

@dmann1209 Год назад

Awesome build, you have genius level skills. Your builds and fabrications are legendary, how did you get into minibikes? The only issue I have with your channel is , I wish there were more episodes.

@Black66 Год назад

Thanks!! 👍👍👍

@dannymccullagh8211 Год назад

Wish you could auction this bike for charity. You could raise a ton!

@andrewnation459 Год назад

Could u tell me where u get those chain/clutch covers??

@Black66 Год назад

Here is the video on the best chain guard in the world ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-76ppl4ZmbQQ.html

@cobster3 Год назад

Put a pipe from carb to the front of the bike and it will act like a turbo at high speed (giving it more air)

@anthonyh.1512 Год назад

Looking awesome so far!! Do you have a link to those foot peg covers?

@Black66 Год назад

Thanks! Here is the link www.ebay.com/itm/251245181236

@818adventures 3 месяца назад

That blue is so sick ! . Also , what size Intake Manifold is that ? I have a PWK 28mm and having a bit of trouble finding one for it .

@JavierMartinez-mm2en 11 месяцев назад

Hi ! Sick build , does the frames come with the hardware or do I have to buy that individual ?

@Black66 11 месяцев назад

Yes it does

@cesarborunda5224 Год назад

Do u know where I can get my hands on a 212 predator hemi ?

@Black66 Год назад

Maybe some of the Harbor freights would have them outside of California.

@camomoto2544 Год назад

What are those open trumpet intakes called?

@Black66 Год назад

Velocity stack

@andrewkuhtz Год назад

Black 66, that bike is looking sweet!!! Love the look of that gts frame! What cam and valve springs are you running on this setup?

@Black66 Год назад

Thanks! It is a mild build . It has a MOD 2 to start with. You know me, It will be switched out pretty quick to test soemthing else.

@lilpineapple7025 7 месяцев назад

What size are those axles for rear and front? Want to build one

@Black66 7 месяцев назад

The links are in the description of the video for the parts used.

@duckygang603 Год назад

Were did you get the axles/ what size?

@Black66 Год назад

The axles came with the bike kit. Check out the final build video for the completed build. Links for the parts are in the description of the videos. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Qmoop0FkxOM.html

@markrice3478 Год назад

Black where did you get those clamps on the vent lines those are nice

@Black66 Год назад

I picked them up off of ebay. The link for most of the parts is in the description.

@alexiszaragoza6329 2 месяца назад

What’s the paint called

@bigboyraclng Год назад

Where you get the throttle clamps?

@Black66 Год назад

Links for the parts are in the description of the video.

@user-yu5fi2rs5i 5 месяцев назад

Does anyone know what the clamps he used are called ? Thank you

@Black66 5 месяцев назад

Yes there is a link in the description for the clamps

@garyquiet3067 Год назад

Hi, love the video question those footings appear to me to be in the wrong place how will you rest your feet with those being in the place they are?

@Black66 Год назад

Check out this video. I ride the GTS bike . It might not look like it but it is a very comfortable bike to ride. Thanks for watching! ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-fx9DqKgFE2E.html

@julestrdprodjimavicpro2869 Месяц назад

I was told the predator 224 is not a good engine? what is your experience with them?

@Black66 Месяц назад

Haven't had a problem with the 244 so far.

@aaron7520 Год назад

Any more videos with the briggs? You should do a ghost vs lo206

@Black66 Год назад

Yes, in the Ghost playlist I have a couple videos with the Ghost VS Briggs ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-ONJbFaEecQM.html

@freddiefillyaw7557 Год назад

Hello black 66 where do you get your gas tanks from ?

@Black66 Год назад

The links are in the description for the parts used . Thanks for watching the videos!

@patrickkennedy7888 Год назад

@black66 what main jet would you recommend for a Nibbi carb at around 1100ft elevation?

@Black66 Год назад

It really depends on engine mods but I would try a 120 or so . If it runs OK, run it for a while and check the plug for that brown or light grey color.

@patrickkennedy7888 Год назад

@@Black66 awesome I'll try that! It's just a 224 with a staged header pipe, nibbi carb with a k&n style filter.

@janicefullerton6201 Год назад

When are you going to do part 2 of the volts mini bike? I really would love for you to beat those guys in California with their own equipment that would be so epic!

@Black66 Год назад

Here is part two. check it out. Also, check out the steering stabilizer video with this bike. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Qmoop0FkxOM.html

@darrellpearce9241 Год назад

I’d be interested to see you throw a set of Azusa 10” 2 piece wheels with some 3.50-10 or bigger tires. See what a top speed would be with a 17” tire and gearing!!!

@darrellpearce9241 Год назад

Any mini bike. Not this one though unless theyre chrome!