Bulkhead and Headliner Removal - Budget Van Build Ep3

Подписаться 193 тыс.

Просмотров 53 тыс.

50% 1

How to remove the Bulkhead and Headliner in a Fiat Ducato, Peugeot Boxer, Citroen Relay or Ram Promaster. Ready to insulate the over-cab roof with self-adhesive closed-cell insulation to prevent condensation from forming.
In this video, we give a detailed step-by-step walkthrough of how to remove the bulkhead and headliner. We show you what tools you will need and give you a few simple tips to make the job very easy to do.
The tools we used in this video are listed here :-
Plastic Trim Clips Removal Tools www.ebay.co.uk...
Allen Key Set www.ebay.co.uk...
TORX key set www.ebay.co.uk...
Plastic Push Fasteners Panel trim clips www.ebay.co.uk...
Disclosure - As an eBay Partner, I may be compensated if you make a purchase using the above affiliate link. Thank you for supporting our channel.
Please do consider subscribing to this build series as we will be going through every part of this build in great detail. With lots of bonus information and free tips and tricks along the way.
Please leave us a comment and share your thoughts on this budget build.
Thank you for watching
Greg & Lou
#fiatducatocamper #offgridliving #selfbuildcamper

Опубликовано:

14 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 384

@kstewart3657 Год назад

Greg, you are the clear leader in instructional videos. Your straightforward approach and ability to break down the work into manageable chunks accompanied by clear explanations of each stage will be a godsend to self builders. Can‘t wait for episode four..👏

@GregVirgoe Год назад

I appreciate that! Thank you for such great feedback. Makes it all so worth while 👍🏼😃

@alanmay1945 Год назад

Yes indeed, great !

@yanekdecleire1302 Год назад

Well said. I feel more confident to know where to start. Great and very helpful Many thanks

@summerjunk929 3 месяца назад

Spot on. I've binged watched so many of these videos!

@Jordan-lw4ef Год назад

As a Peugeot main dealer mechanic I advise you to renew the seal, sealer on the base of the roof aerial while the lining is out. These leak a lot over time . I’ve removed plenty for water ingress. Keep it up Greg .

@GregVirgoe Год назад

Thank you Jordan I did have a good look at the when we had the liner out. Thank you 🙏🏼

@therjb42 Год назад

Good tip Jordan, Ill look on my Boxer when I get there

@norwegianzound Год назад

Yep. Had mine resealed last year. The interior lights had gone on the blink and the leak was the issue.

@yogagirlexmouth166 Год назад

interesting I've had a couple of times water spill out from the midroof area onto the dash...mechanic said condensation.... sounds like it might be this... hopefully I can still take headliner off as I have already converted with a ply bulkhead.

@GregVirgoe Год назад

@@yogagirlexmouth166 it can be either if you are staying in the van at night and have not insulated the cab roof. That does condensate a lot in cold weather.

@ratboy555 2 месяца назад

Greg is a breath of no-nonsense fresh air in a world of self indulgent RU-vid 'van-life' influencers. Love this man ❤

@broadpete Год назад

This is going to be the encyclopedia britannia of Ducato builds. Superb!

@GregVirgoe Год назад

Hope it will help many different van varieties 😊

@vanforallseasons Год назад

@@GregVirgoe Absolutely. It's really helpful to see all the steps broken down, and then you can just apply them to whatever your van has. Priceless resource in a brilliant format. Thanks Greg and Lou.

@GregVirgoe Год назад

@@vanforallseasons thank you guys. We really do appreciate you and makes the whole process so worthwhile 🙏🏼😊

@Jodyphotograph Год назад

A van build bible in the making. Top work Greg

@GregVirgoe Год назад

I hope this series goes on to help many others that want to take on a self build.

@frossato Год назад

Apart from the van project, it is nice to see the couple working togheter.

@nigelburton7408 Год назад

Well done greg. You must be so chuffed with the reaction to your video. I swear you will likely receive several proposals by weeks end and all you did was take a few bolts out. Imagine when you start on the tricky stuff... 😂😂😅😅

@GregVirgoe Год назад

I was nervous about just put out what is basically a strip out video but am so grateful for the comments. There is so much more tech stuff to follow on 👍🏼😃

@tonysutton6559 Год назад

You could also use your hex and torx bits with your socket set to get more leverage and speed thing up. Here in the Black Country we would put the bulkhead at the end of the drive and the tatters would take it away before you could say scrapyard.

@GregVirgoe Год назад

Yes i do have a holder that would take bits in the socket set. :D

@virusdefence Год назад

Very interesting project

@GregVirgoe Год назад

Glad you think so!

@theadventuresofbruceleeand4701 Год назад

Let's go Greg!! I think I found £4 odd when I took out my bulkhead 😝

@GregVirgoe Год назад

It’s a great feeling to get that little bonus 😂😊

@RandomYTStuff Год назад

Greg with the best "how-to"s in the vanlife community.

@GregVirgoe Год назад

That's very kind of you thank you :D

@peterbeston6511 Год назад

Greg please keep this level of detail in future videos. It'll be invaluable if I ever get the confidence to do a build myself

@GregVirgoe Год назад

Thank you for the vote. That's the plan! I will put in lots of useful detail 😃

@happyglampers9053 Год назад

Back when we followed your first build, it became clear to me that you have ‘that’ knack of being able to present information in its simplest form. Our build was only as successful as it was due to you Greg. Yet again, your knowledge comes into its own. Laying out the fixings following the bulkhead removal and in the order removed. Brilliant, thank you for sharing Master Yoda of Yoda’s 👍👏😊

@GregVirgoe Год назад

its really nice to hear that the videos have helped you to build your dream campervan, that makes me happy. Thank you for following us and wish you lots of happy travels in your van :D

@jackcochran6670 Год назад

The van goat does it again, boys!

@GregVirgoe Год назад

I really do appreciate your comment 🤩 many thanks 🙏🏼

@tine8849 Год назад

The thing I love about these popular old vans is the amount of in-depth information on RU-vid. A couple of years ago when I tried to remove the headliner & overcab shelf from my van I was terrified to do it and there were no videos available at the time so I just left it.

@GregVirgoe Год назад

It is a daunting task to take things apart with the fear of breaking parts or not being able to put it back together properly I can totally understand how you must have felt. The step by step videos do make the task so much easier :D

@offgridtbone2162 Год назад

Thanks, Greg. Just made me purchase more insulation and auto carpet to revitalise my gloomy lucking headliner. Wife loves you 😂 I put this job off after hearing it was a pig to do. You have give me the confidence now to tackle it. Cheers bud

@GregVirgoe Год назад

It’s really not difficult to do so don’t panic. Sorry I cost your more money 😳☺️

@eme1one Год назад

The next one's gonna be full of R-values? I really enjoy the focus on under construction/technical stuff/etc. The window expert was awesome! Keep up the great work, Greg! Always excited to see what's going on in your builds

@GregVirgoe Год назад

To compare thermal insulation properties you shoudl really look at the K value :D lol I'm sure you will enjoy the extra information on the next ones. Thank you

@eme1one Год назад

@@GregVirgoe K - R close enough 😂

@fathead1968 Год назад

Excellent detailed video Greg. The Godfather of UK vand builds!

@GregVirgoe Год назад

Really glad you liked it 👍🏼😃

@whu58 Год назад

Firstly, I love this methodical & logical breakdown of how you work Greg (just what beginners need), secondly, (and annoyingly) Im going to have to step away from making/negotiating an offer for the completed campervan, the reason is solely London mayor Sadiq Khan with his stupid ULEZ expansion proposals.

@GregVirgoe Год назад

Yes this is Euro 4 but on the bonus side it has not ad blue or DPF to worry about 👍🏼😃

@chriscoulthard4947 Год назад

Yet my 2,8 diesel iveco doesn't even have a cat but the emissions are as low as a dpf vehicle.

@GregVirgoe Год назад

@@chriscoulthard4947 yes modern additions to diesel vehicles just add more things to go wrong.

@getawaygeese Год назад

Really useful as I have a few jobs on my Ford removing panels and always scared on how to do it without damaging the panels so great tips for a novice

@GregVirgoe Год назад

Glad it helped, the trim removal tool really helped to get the plastic clips out without breaking any.

@doctorpc4x4 Год назад

That van is making you money already

@GregVirgoe Год назад

We all need money to live, luckily living fulltime in a van you can do that quite economically

@denisscott3073 Год назад

Hi Greg 👋 great to see you back again with this van build 👍 will be following yous again 👍👍👍🇬🇧🇬🇧🇬🇧🚌🚌🚌

@GregVirgoe Год назад

Thank you very much great to have you back too 👍🏼😃

@karlmabe1649 Год назад

This is the speed of build that I can follow Thanks

@GregVirgoe Год назад

Hoping to put out at least a couple of videos a week on individual tasks so it’s easy to follow 👍🏼😃

@karlmabe1649 Год назад

@GregVirgoe Thanks alot of van builds rush through it to see results fast I guess, no question the finished product is going tode good in your case so Thanks for doing it in full detail

@GregVirgoe Год назад

@@karlmabe1649 I see quite a few that show you the end result or a 5min Timelapse but no details of how they built it. This build will include all the details 👍🏼😃

@charliethewanderer6872 Год назад

Good show, you got video of each type of screws and their location. It helps a great deal with sections of each step.

@GregVirgoe Год назад

Great i'm glad you liked it

@peanutbuttereggdirt1 Год назад

Alright for some! On my van, Vauxhall, for reasons known only to themselves, decided to RIVET the bulkhead in place!

@GregVirgoe Год назад

Thats a bummer, lot's of drilling to remove it the rivets heads

@stevemellon8555 Год назад

Thanks Greg looks like your doing a really comprehensive video series

@GregVirgoe Год назад

Glad you think so! It’s my plan to make this series much more detailed than before. 👍🏼😃

@chrisanderson8578 Год назад

I remember watching a lot of your epic camper build in the past and you're an excellent teacher. Look forward to seeing this progress.

@GregVirgoe Год назад

It’s great to have you back on here watching this new series. Thank you 🙏🏼

@rdyson Год назад

I just did this same job last month with 2 layers of 20mm closed cell foam - I should have waited!

@GregVirgoe Год назад

That will be really well insulated up there with 40mm of closed cell. good job :D

@orangeslugslug Год назад

Just doing my L3H2 Boxer. This video was great , saved me working it out for myself 😊 Great videos, hoping you stay ahead of me in your build😂

@andyfv1 Год назад

very detailed,without skiping minor stuff 👍

@GregVirgoe Год назад

Thank you, hope they will be very useful

@andyfv1 Год назад

they will when i find a van!!

@mattoriental Год назад

Cheers Greg... I've been tearing my hair out trying to get that parcel shelf out from above the cab. Now I know I've to remove the headlining - thanks, what a help this will be to my Ducato conversion 👍

@GregVirgoe Год назад

Yes, I don't think you can get to the four bolts near the windscreen with out taking the headliner out, but as you have seen it's not too bad a task and doesn't take long to do. Glad that has helped you

@marks3678 Год назад

I have learnt a great deal on van builds watching RU-vid. The one person I turn to if there's anything I'm stuck on or don't understand is Mr Greg Virgoe. Simple and understanding ways of doing a van build. Thank you so much for providing me and the rest of us van builders and none van builders who find your videos really enjoyable. You're an inspiration to us all.

@GregVirgoe Год назад

Thank you very much for such great feedback. Really pleased you find the videos helpful 👍🏼😃

@dannywilson5852 Год назад

Looking forward to the insulation probably one of the most important aspects of the van build ..

@GregVirgoe Год назад

We’ll be looking at more science and new products with this build.

@UKvet246 Год назад

Time lapse would be an absolute bonus for this series.

@GregVirgoe Год назад

Do you mean a montage of the full build towards the end of the project?

@UKvet246 Год назад

@@GregVirgoe No Greg, a time lapse of the mundane footage such as unscrewing things. Appreciated your including footage explaining things, as an example when unscrewing the bulkhead.

@GregVirgoe Год назад

@@UKvet246 ah ok 👍🏼 some of the footage is sped up to 150% as I was aware of that and removed duplicated jobs like sun visors and grab handles. Sorry you didn’t like it 😢

@UKvet246 Год назад

@@GregVirgoe Haven't disliked anything, just an observation on viewing the more mundane tasks.

@GregVirgoe Год назад

@@UKvet246 there are buttons to skip forward in 10sec steps. You might find that useful 👍🏼😃

@oWispify Год назад

Suprised you don't have a sponsor for these videos as they are so good!

@GregVirgoe Год назад

I didn’t want to go down that route and lose some integrity with my audience. 👍🏼😊

@StevenGarvey-ft6sk Год назад

I just removed my bulkhead in the Iveco daily and have been scratching my head as to how to trim back to the plastic from the cab around the perimeter of where the bulkhead was. Hopefully Greg will do this later ! I’m really pleased of this series because it’s given me the confidence to start converting in Summer.

@chriscoulthard4947 Год назад

They do have the full plastic trims in mini busses and van with no factory bulkhead. I believe Renault master are the same as the daily. Bit rare to find though.

@GregVirgoe Год назад

I shall be making mine out of plywood and covering with silver carpet so there will be a video on that soon. If you don’t fancy making them and have a little cash you can buy the full trim kit from Solway solwaycamperconversions.co.uk/online-shop/ols/products/front-shelf-cover-ns-os-b-pillars-3-piece-set-for-ducato-relay-boxer-h2

@StevenGarvey-ft6sk Год назад

@@chriscoulthard4947 Thanks Chris, I appreciate the information! Funny thing, you reminded me of when I bought a salvage Movano with headliner removed because of fire damage. The body panels had “Iveco” stamped on~and the Movano is same as the Master.

@StevenGarvey-ft6sk Год назад

@@GregVirgoe Thanks Greg. This van is H3,L4 and between the side loading and rear is going to be our pet cages aswe are licensed pet transporters. From the cab back to pillars where the side door finishes I’m going to have a small welfare area for me to rest as we transport from Russia to all over Europe and UK. The rear will need to be washable and extremely well temperature controlled. I will need air conditioning and heating but also a roof fan and diesel night heater to run off leisure batteries in case of breakdowns. Siberia gets to -60 in winter and +35 in summer. No idea what air conditioning to use but needs to be fit for purpose. I’m a carpenter by trade Greg and was making stairs etc in my dad’s workshop since being 12 and can say that your work is as tidy as I have seen from any tradesmen

@GregVirgoe Год назад

@@StevenGarvey-ft6sk thank you 🙏🏼 I really appreciate that. 👍🏼😊

@russ1046 Год назад

Looking forward to the next video - I like it when you do science,👍

@GregVirgoe Год назад

I’m putting out some rust repairs to the floor first as that’s the order it was filmed but after that is more facts and figures. 👍🏼😃

@patrickmquiney1127 Год назад

Van conversion master class.

@GregVirgoe Год назад

That’s very kind of you 👍🏼🤩

@roliasder Год назад

When removing the bulkhead on my Mercedes Citan to make a mini camper there was a few tamper resistant bolts. Usual trick with a hammer and a small cold chisel on the side of the head had them out in no time. Following your videos with great interest as looking to get a mwb Ducato for my next build, have a lwb Crafter at the moment and want to downsize, slightly.🚘

@mcmcolm Год назад

I did the bulkhead on a 2015 Ducato and it had some of those, surprised to see there weren’t any on this one, suspect the bulkhead was taken out before seeing as the plastic shelf had been cut.

@jesuscamefromouttaspace9549 Год назад

Another great video, helped me with taking the liner out of my 2015 LWB. While not exactly the same you've definitely made it a lot easier for me.

@GregVirgoe Год назад

That’s really good news. It can be a daunting task but taken in steps it’s doable 👍🏼😃

@darrynbird8111 Год назад

We like science, physics in a van build absolutely perfect, great video Greg many thanks

@GregVirgoe Год назад

We have filmed some great ones for you if you appreciate that kind of information :D

@zeljkolibjak5967 Год назад

Hello from Croatia, The videos related to the Mercedes Sprinter were very good, full of details and explanations. The creation of the Fiat Ducato in the first two episodes is fantastic in my humble opinion. The explanations go into the smallest details. The person filming should also be praised.

@GregVirgoe Год назад

Thank you very much! I shall make sure that Lou reads your comment. Thank you for such great feedback 👍🏼😃

@DeonvanDruten Год назад

Greg, i've just subscribed. I'm from South Africa, and I plan to start a my Ducato or Boxer conversion later htis year. So far, yours is hands down the best instructional videos i have come across. I really look forward to following your build!

@GregVirgoe Год назад

Welcome to the channel. I have a lot of useful video from our previous sprinter build that you will also find interesting 👍🏼😃

@DeonvanDruten Год назад

@@GregVirgoe Thank-you i intend to! I'm going to find a van that fits your instructions, not the other way round!😄... i'm a rank beginner, so this is gold!

@peterelliott2914 Год назад

Thanks Greg! I look forward to the insulation vid. One thing, I've seen people putting a LOT of sound deadening around to make it sound nice, it occured to me this is quite a lot of extra weight! When you do the insulation can you possibly add a note about sound deadening and how much we need / how little we can get away with. Or save it for another video lol. Anyway, keep it up - your vids are the only proper resource out there for the mechanics of making a van for vanlife. Cheers mate. From New Zealand. You can borrow my van if you come down this way for a holiday.

@GregVirgoe Год назад

Yes we have filmed the sound deadening video already and I can tell you I only used 18 small squares on the whole van. 😊 I explain why you don’t need to go mad and show another product that is better to use in certain areas. 👍🏼😃

@stevesjobsUK Год назад

Greg's Sprinter video series covers this, I can remember him tapping the panels to see how much they resonated.

@peterelliott2914 Год назад

@@stevesjobsUK Yeah I just watched that one after he gave me the heads up! It's a great series and very well presented.

@matthewnorthway1970 Год назад

Excellent video yet again Greg your attention to detail is fantastic 🎉

@GregVirgoe Год назад

Glad you enjoyed it 😊thank you for leaving a nice comment.

@siajnesdunk Год назад

Always a pleasure to see your videos. Also nice work from Lou.

@GregVirgoe Год назад

Thank you, I will pass on your compliments to the camera lady :D

@ianfurqueron5850 Год назад

I commend your patience. I would have been like, "Here's a driver for the Torx bits... but since I have a impact driver, I'm going to use that..." For everything... including that 13mm bolt. I look forward to the rest of the build. Slowly catching up on videos I've missed.

@mikespeers8281 Год назад

Love the fixing cataloging, very helpful 👍

@GregVirgoe Год назад

I can think of anything worse than removing everything chucking it in a box then struggling to remember what went where and ending up with screws left over 😂 Glad it was helpful! 👍🏼

@neilcliff6236 Год назад

These videos are superb Greg, as always. Hopefully get to meet you one day at one of the van meets.

@GregVirgoe Год назад

Thanks you Neil, I look forward to seeing you 👍🏼😃

@user-zt2sg8kd3w Год назад

Great video Greg, look forward to the rest

@GregVirgoe Год назад

Glad you liked it 😊👍🏼

@thelawman Год назад

Your the man for us novice campervan builders Keep up the good work and your way of explaining is just the job. Thanks Greg

@GregVirgoe Год назад

Than you very much Les, Much appreciated

@ukbeeps Год назад

Thanks for your time and expertise Greg I'm sure it be much appreciated. This will be a beneficial series for new builders and those who perhaps looking for ideas to improve there build. Otherwise great source of info and confidence for those wishing to build their own camper. 👍

@GregVirgoe Год назад

My sim is to break these tasks down into easy to follow guides that anyone could feel confident taking on. I’m really grateful for your kind feedback 😃

@rogerjob2780 Год назад

Well done Greg 😎🚍⚓️🇬🇧👍

@GregVirgoe Год назад

Many thanks Roger 👍🏼😃🤩🍻

@markthompson2466 Год назад

Take that £1.20 off the budget...ROTFL😂😂😂 Best campervan build videos on RU-vid!

@GregVirgoe Год назад

Thank you for appreciating my humour 😆👍🏼🤩

@DanMeyer-o1l Месяц назад

Videos are very well done. Really appreciate the level of instruction and insights. Thank you

@ronbooth1382 Год назад

Very informative Greg. Love the content. See you soon, love to Lou.

@GregVirgoe Год назад

Thank you so much, lots of love to you both :D

@garrettstrahan2218 Год назад

Excellent video again, Greg. Really well thought out.

@GregVirgoe Год назад

Thank you 🙏🏼😃

@flashback9966 Год назад

Well worth the effort Greg. Our first van, a Autosleeper Duetto, suffered terrible condensation problems above the cab. We stored our bed linen there and it was always damp and mouldy, if we left it there during the cold winter months. It had just a single layer of carpet lining. Looked nice but totally useless.

@GregVirgoe Год назад

Yes I agree it’s one area that’s often overlooked and can create a lot of condensation on that metal roof. 👍🏼🤩

@daviemclachlan Год назад

Great video about over head insulation. I had condensation running down onto my windscreen from the inside of the roof after I had finished my build. Everyone please do this early on as it is definitely worth it. Cheers Greg

@GregVirgoe Год назад

Yes it’s an area that is often overlooked but I guarantee there are loads of vanlifers that have water pouring through their cab lights the next day.

@leelendon1482 Год назад

Thanks Greg, for this video. I am in fact at this stage now as just have the cab headlining to reupholster myself. Done the door cards and gear stick gaiter. Seats are now done . A lot of bolts and a must to ensure a good insulation above their. As during the winter this area was running with condensation and ice . This has led to moisture on my headling causing black spots. I was going to use the kirivans 8mm closed cell acoustic thermal liner with silver face . Many thanks Greg

@GregVirgoe Год назад

Yes I totally agree. 👍🏼😃

@tamlyon4435 Год назад

1st class as ever Greg 👍

@GregVirgoe Год назад

really appreciate your comment. thank you

@mzungu4770 Год назад

Loving the new series!

@GregVirgoe Год назад

I’m so pleased 😀

@davey-jay6527 Год назад

Greg we have watched a lot of video's on youtube and your craftmanship in campervan builds leaves no stone unturned ..me and the mrs have just bought a little lwb high roof ldv maxus to convert so we will be tagging along with this build cheers buddy .

@GregVirgoe Год назад

Those LDV vans do look great. Best wishes for your build and thanks for following along 👍🏼😃

@kevinthebespectacledpilgrim Год назад

Really useful Greg. We’ve got a Fiat Ducato which we had converted based on your van build videos so it’s great to see all the detail. Brilliant RU-vidr Adz Ventures has just bought a Ducato which he is fitting out and I’m sure he’s going to benefit from your tutorials. The adorable Ame In a Van cited you in one of her videos as the ‘go to’ for van conversion. I can’t agree more.

@GregVirgoe Год назад

Yes I follow both those guys so it will be interesting to follow Adz progress on his Ducato. Ame made a great job of her transit build and is a fantastic film maker. Doing very well on RU-vid. Thank you for a great comment 😊

@gavintodd8944 Год назад

Greg as always explained simply and detailed demo. Thanks your videos really help😊

@GregVirgoe Год назад

Glad you like them! 😊 thank you

@LeeMizen Год назад

Bringing back fun memories ❤😂

@GregVirgoe Год назад

Thank you for watching. Is your own van finished now? 😊

@LeeMizen Год назад

@@GregVirgoe no not yet just started the overhead cabinets, then onto the Kitchen🚐👍

@roygardiner4002 Год назад

Great detail as always Greg. Good stuff, thanks.

@GregVirgoe Год назад

Glad you enjoyed it

@markjeppo Год назад

Brilliant! Loving this series. This level of detail is so important for those of us who need all the help we can get.

@GregVirgoe Год назад

That’s great I will make sure to pack as much useful stuff into them. 👍🏼😃

@russelldavis7108 Год назад

Top job Greg! And nice camera work from Lou too🙂

@GregVirgoe Год назад

Glad you liked it! I shall pass on your praise to my camera lady 😊

@24vince1 Год назад

Nice one Greg, easy to follow as always, good job 👍

@GregVirgoe Год назад

Awesome, thank you!

@CallumNug Год назад

I enjoy the channel Greg, probably one of "THE" Best and most detailed campervan build channels on RU-vid. Its good to refer back to when doing a build as a kinesthetic learner I need to be touching and doing. Whereas my wife would prefer a book format. You should run a basic maintenance, insulation, electrics course. Very basic but allows for people like me to take on the information differently. Anyways, hurry up and finish the build so we can see you and Lou of somewhere nice abroad. Keep well pal

@GregVirgoe Год назад

Hi Callum, I would really be interested to hear more of your thoughts about the different learning methods you suggest. 🤩

@ronangilloway Год назад

Absolutely great to have you back to a build video, looking forward to every episode Greg

@GregVirgoe Год назад

Thank you Ronan, glad you liked it

@tituslane4929 Год назад

The man is back .... and in top form

@GregVirgoe Год назад

Thank you very much 😊

@markmim5676 Год назад

Hey Greg well thought out and descriptive video as usual. Really good idea to count and number the screws for ease of putting back afterwards.

@GregVirgoe Год назад

Thank you. Maybe it’s my old age but I would struggle to remember where they all went otherwise 😂😃

@markmim5676 Год назад

@@GregVirgoe 🤣I know the feeling but totally makes sense for all👍😁

@voyager3355 Год назад

instructions made for babies (: clear and with no experience you can do all! thanks Sir!

@GregVirgoe Год назад

Trying to make it accessible to everyone 👍🏼😃

@MountainMan69 Год назад

Greg, your videos are fantastic, have to say you are so brilliant at explaining all the steps and processes that are needed during a van build. Love that you also supply tips on where to buy things, how to do things etc... really enjoying watching this van build series.

@GregVirgoe Год назад

Thank you 🙏🏼 I’m glad you are enjoying them 😃

@jamesvardy3530 11 месяцев назад

these vids are so helpful... you're a diamond for taking the time to do em... thanks 👍🏻

@naturelover_9211 Год назад

Pleasure to watch your all videos van conversion or traveling always interesting thank you Greg .

@GregVirgoe Год назад

Thank you 🙏🏼 I’m pleased you like both formats. The travel ones are not as popular and I find them hard to make interesting so I’m glad you like them both 😃

@benwilliams794 Год назад

Great video, appreciate the effort it takes to make this series!👍

@GregVirgoe Год назад

It makes it all worth while when they are appreciated so thank you 🙏🏼

@JordaninJapan Год назад

Greg, you are a wonderful educator, and the quality of your videos is unmatched. Your attention to detail is most appreciated. I'm sure it is quite time consuming to go as in-depth as you do, so I hope you keep the videos coming. Many, many thanks!!

@GregVirgoe Год назад

Thank you very much, its nice to know they are appreciated. I do enjoy makign these instructional video but as you indicated they do take a lot more time to film. With comments like yours that makes it all worth while and there will be many more to come.

@pip1723 Год назад

Been looking forward to seeing this build !.

@GregVirgoe Год назад

I hope the first few videos are worth the wait 😊

@andym1908 Год назад

Great stuff Greg 👍 👏 👌

@GregVirgoe Год назад

Glad you enjoyed it

@arcenciel2968 Год назад

Hey Greg, you’re back on the beaten path again, right? Looks like you’re enjoying this rather simpler van build! Best of luck!

@GregVirgoe Год назад

Yes I am! I like making these instructional videos. I’m sure this van will have its challenges. It’s not as square as I first thought 🤔😂👍🏼

@LeisureBit Год назад

Very helpful especially for me on the removal of headliner - thank you, All the best. David 👍

@GregVirgoe Год назад

You are welcome, glad you liked it.

@AaronMilton-k7l Год назад

You couldn't have timed this series any better as I have just purchased a citroen relay L3 H2, which I am going to convert . Really appreciate the detail you go into. Keep up the great videos.

@GregVirgoe Год назад

Great to hear! There are loads more videos already filmed in this series so plenty of good information.

@mitmamitmus4113 Год назад

Great video as always Greg . Ducato is the king of Vans and I've had most makes . Keep up the brilliant content.

@GregVirgoe Год назад

It’s a very good van and my preference above the French variant but I must say I still prefer my sprinter to drive 😊

@mikelittle8678 Год назад

Your videos are incredible. Educational, inspiring and great fun to watch. Please keep doing them for many years

@GregVirgoe Год назад

Thank you so much 😊 really is appreciated 👍🏼

@justincole7566 9 месяцев назад

Super helpful to see the process step by step. Thank you !

@jansweeney1333 4 месяца назад

Hi Greg, Started re watching this budget build must be my 3 rd time watching ,so Informative...As for me still saving up for a van ,only got 2 k to date so a long long way for me to go ;hopefully within 2-3 yrs I’ll get a van I can afford ,sounds daunting 2-3 yrs . I ll keep the faith /watching. Seen your video with Mel ‘s big van small world grt . Keep safe🏴󠁧󠁢󠁳󠁣󠁴󠁿