BULLPUP NERF SPRINGER! Orion Blasters Lynx V2! [Review] 

I still have a RFS I need to do something with

@@ValTek_Armory I did a plunger tube expansion on mine back in the day, just gotta get a metal trigger for high loads

I think Northeast Designs is working on a kit

Glad you liked it!

He has good color choices and great print quality. I printed this myself

@@ValTek_Armory for the printer-less consumer (me) their quality and price point is a blessing

Still get the 3D prints from Silverfox, there quality is even higher then other very well-known sellers

i'd have to make some shrouds to cover the bars on the TCB-U

There are a lot of variables with this. I used an 18kg turf Longshot spring with an extra right barrel for my high powered one

Worker springs are okay, but they wear out too fast for my liking

shorter than a longshot base blaster

21.5" not including however much the scar or barrel sticks out the end (in the case of Valour's lynx, none)

3d printing has really given the hobby a leg up

I printed the catch parts in PLA. I use 4 perimeters and print catch components solid

@@ValTek_Armory I figured it out thanks for the insight. Jacked up the perimeters and now I have a worker 22kg catching reliably.

you'll love it!

@@ValTek_Armory I fell in love with it last Ragnaroctoberfest. Where I was fortunate enough to try the v1 😁

not to my knowledge

it is great!

The integral scar needs to be 3/4" / 19mm or smaller in diameter to fit. Worker scars, HSF Slurpee and Thanh Slurpee scars have all be tested and fit well.

@@orionblasters6342 Cheers. I could use one of Spectre's aluminium ones then.

These have an airbrake built into the plunger

That is the v2 that you'll be getting

foamfreaks had them for a while

I do, but hardware kits are not easy to get right now. Dan will resume selling hardware after he's done moving

@@ValTek_Armory keep me in mind when hardware is more available. Love ur work and ur channel. Thank you... 🎯

I can be reached at my business email found in the About section of my channel

I don't think any part needs support regardless of printer

Yeah, I need to nerf this to use it for competitive play

I look at 110fps and think "that's too low for a sidearm". Completely different game type though.

i'll have to go digging

Nvm I found them

got it from foamfreaks at ragfest. I had a few

You'll need either a longer or tighter barrel to hit 300

@@ValTek_Armory such as the aluminium one on silver fox website. What’s the highest I can get it with just the 18.5 kg?

he'll likely put them on thingiverse or host them on his own site

Thanks, can't wait for the hardware kit to be back in stock. I'll be placing an order than.

if i wer to ask for a rapid strike with a black painting with blue fire starting at the front of the barrel going to the end of the jam dor y fang revamped motors with a proformens upgrade fly whells y normal mods to the blaster what wuld it cost

Best to drop me an email. It is on the about section of my page

SilverFox is your man

@@ValTek_Armory on etsy