BUY vs DIY - Recreating a $200 Gem Lamp

Просмотров 1,3 млн

% 51 947

Can we recreate this iridescent glass gem lamp with acrylic and resin? Go to buyraycon.com/EvanAndKatelyn for 15% off your order. Brought to you by Raycon. 👇 E&K CHARMS LINKS BELOW! 👇
Check out our limited edition charms, available to preorder for the next 20 days! (til March 31st)
Supurrvisor: www.makeship.com/products/supurrvisor-charm
Words Are Hard: www.makeship.com/products/words-are-hard-charm
Make Fail: www.makeship.com/products/make-fail-charm
🙏 Other sponsors:
Glowforge: check out our Glowforge laser cutter here glowforge.com/evanandkatelyn # glowforgepartner
Use our link to get $500 off a Pro, $250 off a Plus, $125 off a Basic
Interested in making a gem lamp yourself? We've uploaded our 3d model and svg lasercut files for our Patreon supporters www.patreon.com/posts/gem-lamp-3d-63585265 and RU-vid members ru-vid.comUgkxttTYJzqOnlbG0lpccioJxCZDSRJq1beU
Check out the Patreon Aftershow for:
- Who we thought would win before we unboxed it
- Why the light fixture was way more work than we showed
- A sneaky trick we used to get iridescent sheets faster
- The long break in the middle of filming
- How long ago we actually ordered the "buy"
- Our thoughts on having a tie
- Where will we put these in our house?
- Why do companies make lamps where you can't change the light bulb???
- will we ever try real glassworking?
If you're a Patron already, watch it here: www.patreon.com/posts/63670348
If you’re a RU-vid Member, watch it here: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-RTLJbqkSkIQ.html
Not a Patron yet? Join here: www.patreon.com/evanandkatelyn
Not a RU-vid Member? Join here: ru-vid.comjoin
TOOLS & MATERIALS (affiliate & *sponsor links)
Iridescent film amzn.to/3HvK6GG
USB dimmable COB LED amzn.to/3mSo7lo
Colorshift mica (our exact one isn’t online anymore, this is similar) amzn.to/3LnyiJw
Draftboard shop.glowforge.com/collections/draftboard/products/draftboard
Clear acrylic shop.glowforge.com/collections/acrylic/products/clear-acrylic-cast-transparent-glossy
UV resin amzn.to/35VWlil
Original West Elm light: www.westelm.com/products/glass-gem-table-lamp-w2893
🛒 Our favorite tools/materials on our Amazon page: amazon.com/shop/evanandkatelyn
Want more E&K videos? We have more channels:
🎮 Gaming: ru-vid.com
🎙️ Podcast: ru-vid.com
🎮 Gaming Uncut: bit.ly/ekuncut
👫 E&K 2: ru-vid.com
👫 E&K Uncut: ru-vid.com/show-UCdq4aWLdfL6BSkkMjkxuAlw
📺 Twitch live streams www.twitch.tv/evanandkatelyn
SOCIAL/SUPPORT LINKS
💵 Patrons can watch our Aftershow here www.patreon.com/evanandkatelyn
👕 Merch shopevanandkatelyn.com/
📸 Instagram & 📣 Twitter: @evanandkatelyn
💬 Discord discord.gg/evanandkatelyn
👽 Reddit www.reddit.com/r/EvanandKatelyn
🎥 FILMING GEAR (affiliate)
bit.ly/eandkfilminggear
0:00 Intro
0:40 Iridescent laser tests
8:03 3D model and “small” test
11:08 Making the shade
15:47 Making the light
18:54 Final reveal of DIY
20:12 Reveal of “buy”
22:50 BUY vs DIY comparison
🎼 MUSIC
Investigations, Getz Me To Brazil, Firebrand, Hep Cats, Marty Gots a Plan, Funky One by Kevin MacLeod
Retro Party, Stalker, by Rafael Krux
World Of Embers by Alexander Nakarada
Jazzy Comping 2 by Agnese Valmaggia
Let's Workout Hard! by MusicLFiles

Хобби

Опубликовано:

11 мар 2022

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 2,7 тыс.

@EvanAndKatelyn 2 года назад

Check out our limited edition GOLD ENAMEL CHARMS, available to preorder for the next 3 weeks! (til March 31st) www.makeship.com/shop/creator/evan-and-katelyn

@eekeekamoose7996 2 года назад

I wish I wasn't allergic but ill probably buy as a gift for someone else to show support for everything y'all do.

@bleujay6127 2 года назад

Hey Evan & KateIyn! I love your vids! I used this iridescent film stuff with thermoplastic for a school project and you guys inspired me to use the abundance that I have left over. I put it on my windows to make iridescent fake stained glass!

@katiea.5793 2 года назад

Hello!

@paadoxal 2 года назад

loved the video as always! just wanted to mentaion that if you wanna warn for flickering lights, there's another moment at 23:22 that isnt signified

@EvanAndKatelyn 2 года назад

@@bleujay6127 that sounds like it'll look really cool!

@ez8314 2 года назад

I think your lamp looks a bit like a fairy greenhouse, whereas the buy looks like a glowing rock in a mystical cave ❤️ I like them both a lot!!

@erinasnow 2 года назад

those are very apt comparisons! Love them

@eruvande 2 года назад

Yes! I could imagine a little diorama in there of miniatures lit up from the bottom

@jameswest6232 2 года назад

Good description.

@datgaydangernoodle1315 2 года назад

I could imagine lil fairies in there

@lenaotaku5905 2 года назад

Yes yes. I gree.

@raeganelizabethames713 2 года назад

it’s actually made by blowing glass into a mold and that’s why the edges are smooth and rounded. 😊

@mwater_moon2865 2 года назад

Yup, just like soda bottles are made! And they don't paint it or cover it in a film to make it iridized, they spray it with metal salts while it's still glowing hot so micro metal crystals form.

@idkkkk94 2 года назад

@@mwater_moon2865 wow your smart

@akriandurin151 Год назад

@@mwater_moon2865 Always wondered how they would get any sort of pigment to adhere in such a way, makes sense it's not pigment at all.

@justyouraverageweirdo Год назад

@@mwater_moon2865 With all this in mind, they probably could've done something similar with resin.

@mwater_moon2865 Год назад

@@justyouraverageweirdo Similar how? Shaped like blown glass? I doubt it, as resin tends to drip and take a VERY long time to set as compared to glass solidifying as it's being blown. Now you COULD do it with plastic, as that is also often injection molded (though it's usually vacuumed into place by sucking air out of the mold rather than air blown into place like glass.) But resin isn't going to go from liquid to solid fast enough to stay in place without drips.

@WanderingWolfe 2 года назад

While I do like the smooth seams of the purchase, I find the crafted piece overall more aesthetically pleasing. Your facets seem to show their color individually, the light is far better implemented. Overall, I think yours is simply higher quality. The only real win the purchase has for me is that it is glass. But that's not a huge factor compared to everything else.

@splashthefly9039 Год назад

I think that if you really want glass that you can buy a cheap photoframe and just use that glass (I haven't watched the vid yet, so I don't know how they made theirs...yet).

@jlammetje Год назад

Totally agree!

@alveolate 6 месяцев назад

there's a bonus to DIY that wasn't mentioned... you can make as many shells as you like, different designs, different materials, colours, sizes, and fairly easily swap between them. the customisability here is quite valuable.

@DannyDevitoOffical-TrustMeBro 2 месяца назад

The only thing I actually preferred about the buy is that the base kind of tucks in, it doesn’t just jut straight down to the base like E&K’s does. If they’d made theirs have a few “base” segments of the acrylic on bottom to make it more of a geometric rock shape, it’d be perfect. I prefer their seams and the effect it has by refracting light differently on each face.

@EchoRiverss158 Месяц назад

Yes! I agree!

@-leezha- Год назад

if combined- glass shell with your lights- it would be the ULTIMATE lamp

@datgaydangernoodle1315 Год назад

Y E S

@gr33ngirlsea Год назад

Right?? The buy should be reaching out to them!!

@CDRaff 2 года назад

So just an FYI: be very careful cutting plastic film with a laser. Most Iridescent film is PET which is perfectly fine to cut with a laser, but be very careful to not cut vinyl based films as they off gas hydrochloric acid which can not only be dangerous to breath in, but can also ruin the mirrors in the laser.

@EvanAndKatelyn 2 года назад

Very good tip! We looked into it beforehand to make sure we could cut it

@bulikiki100 2 года назад

@@EvanAndKatelyn I would really appreciate it if you mention stuff like that, so people won't try to imitate you without checking

@dbseamz 2 года назад

@@missbeaussie by "imitate it" they mean if someone watches E&K cut iridescent film with a laser and have no problems, then tries it without checking if the film is laser safe (since it isn't directly mentioned in the video that not all films are laser safe) it could end in disaster.

@baconscoobysnacks3135 2 года назад

@@missbeaussie is reading often difficult for you?

@mwater_moon2865 2 года назад

@@missbeaussie but E&K didn't say that they had checked beforehand. In fact, with editing, they make it look like they just dove in head first and started experimenting. Watching their trouble with applying the film my first thought was "hey, I have some Cricut stuff that might work for that, I bet it might be easier and cheaper!" but it's vinyl, which I don't find out could be VERY dangerous until the comments. And waiting til the comments for warnings is ALWAYS a no-no.

@spinwitch 2 года назад

They are both beautiful. What I want to see: when the non-servicable light breaks, take the bought one apart and install your kind of base into it. The resulting No 3 would probably beat both in the category aeshtecs.

@zaradawkins2312 2 года назад

Good idea!!!

@safala 2 года назад

Oohhh yes!

@mwater_moon2865 2 года назад

Very much this! Since cast glass isn't really a diy-able thing, I was hoping they might use the diffusion grating to make a mold and resin it just since that's closer in feel to the cast glass of the bought lamp, but I am ALL about DIY repairs and upgrades to keep things out of landfills.

@RevlisHaku 2 года назад

I personally LOVE the DIY one more, cause the light source kinda looks invisible? and that's pretty magical to me! The infinity effect is also amazing. The only thing the buy has going for it is the finish. but 10/10 I would choose the DIY over the Buy

@HappyTeaLeaves Год назад

I prefer the one you guys made. I like the sharpness and how more colors are refracted.

@julianhering4194 Год назад

Yeah Same here

@Malcadicta 2 года назад

They're both really good, just completely different vibe. The buy is more of a fantasy-like soft glowing crystal and the DIY version certainly looks fits more in the sci-fi or maybe some cyberpunk-like aesthetics. The only red flag for me when it comes to the buy one is the lack of ability to change the lightbulb. I mean I'm paying all this money, I'd like my lamp to last longer then life of its lightbulb.

@FlutePlayer777 2 года назад

If its an LED then you don't have to change the lightbulb for a very long time. There might be a way to open the bottom but we can't see it.

@mwater_moon2865 2 года назад

On the other side, in a house with a cat, the glued to base is safer and more stable/sturdy. I do hope that there is really a way to change the light short of removing the entire base, but if you want to get down to it, E&K's light base will have to be completely remade once their LEDS start to fail too....

@cryofpaine 2 года назад

Plus I don't like the look of the light in the buy. It's just a big glowing rod in the middle. The diffused leds in the base of theirs looks so much cleaner.

@KaiseaWings 2 года назад

@@cryofpaine It is absurd that you can't change the bulb. It's honestly a shame because then you could possibly put their light array in the bought shell.

@thorin693 2 года назад

@@KaiseaWings my thoughts as well buy the glass one and make your own light's.

@pinkbuninja6536 2 года назад

Rather than one winning over the other, I recommend making more in different shapes and putting them all around your house like you’re living in a fantasy cave.

@HandyHelons 2 года назад

Yep! This! Do this! Just the best idea ever!

@bearoqueiro8905 2 года назад

then plants plants PLANTS

@deijix 2 года назад

theirs looks like you'd find it in a mystical cave full of fairies, yours looks like it would be a source of energy or light on a vibrant, neon alien planet. both equally as beautiful.

@Hall_Meli 2 года назад

I was truly torn when I saw the nice smooth edges of the bought one, but like Evan mentioned, there is just something aesthetically pleasing about the sharp edges of the one you made as well. Plus, I love the light base. Gah! Such a hard choice.

@shaunacorrigan9372 2 года назад

I gotta agree, this one is definitely a draw. Both are beautiful, each has its own pros and cons, and I would be thrilled to have either (or both!) in my home. I do think E&K's looks better in the dark, though, despite not being as bright. It just looks SO COOL!

@rowanwax 2 года назад

Same!

@louieluigi9048 2 года назад

Pro!

@charlessacco1110 2 года назад

Same I agree 100%.

@mauritshagedorn856 2 года назад

They both look really cool. Love the orange glow theirs gives off that is my favourite colour

@thespqrguy 2 года назад

Yeah i think the bought one is actually too bright in a sense that the light drowns out the actual glass piece whilst the one they made beautifully accentuates the colors of the acrylic geode "crystal"

@littlebellaballoo 2 года назад

I’ve noticed that the “Quality” category is often kind of ambiguous in this series. I feel like you could split it into two different categories: “Craftsmanship” and “Durability” because sometimes you make something less durable but with incredible craftsmanship like floodle the cloud lamp!! You guys should win quality every time lol

@zimnizzle Год назад

I’d say that for $200 that lamp was worth it. Your lamp is one of a kind and very modern and a totally different, awesome look! AMAZING WINS for both!

@jefffu3820 2 года назад

I love how nonchalant Evan is about answering Katelyn's questions while holding iridescent film in his mouth, total pro. :)

@MrCwildeman 2 года назад

As someone who uses CNC lasers in my shop for around 7 years, I may be able to answer a few of your concerns about the laser. Highly reflective materials can degrade the cutting ability since less of the energy is being absorbed by the material, but it won't reflect back into your tube or damage your machine. The focus length is determined by the lens but power and shape of the beam rapidly diverges and diffuses like a cone on the other side of your focal length. It can't travel back across the mirrors once it goes through the lens because its no longer a cylindrical straight beam like it was before the lens. It can of course damage your eyes so make sure to wear your eye protection with proper filters for the right wavelength as usual. Co2 is 10.6 um and some lasers have filters on the glass viewing window too. As for the "flashes" seen at 6:49 the honeycomb table is reflecting some energy back upwards as the light passes over each metal cell in the honeycomb. Sometimes these reflections can score the underside of your work depending on the power/speed. It can mean that the power is a little too high for the application since a lot of unused energy is remaining after the work is done and the cut is finished. For higher powers, blade tables are good for heavier cuts and remove the frequency of this "backflash" on the underside of your work. Lasers are fun but deserve respect so your cautious approach around them is healthy! Happy making!

@carlotta4th 2 года назад

The light reflecting back won't get to the tube, yes, but it will absolutely create more heat in the lens and potentially crack it. Those are wear items anyway but that's a LOT more wear on it.

@maisies515 2 года назад

Thank you for your info! Nice to know the mechanics behind it

@mwater_moon2865 2 года назад

And evidently, as someone else pointed out, don't cut vinyl based films as they off gas hydrochloric acid which is bad for you AND the laser....

@pempu_making 2 года назад

I can’t believe how incredibly beautiful the DIY looks in the dark. I SO WANT THIS! If my apartment was just an empty room, I’d do anything to have just your diy lamp in there 😭 It’s probably really the prettiest thing you’ve ever made 💕💕💕

@EvanAndKatelyn 2 года назад

thank you!

@TheMissHooligan 2 года назад

I want their lamp too.. AAAAAAAAAAAAH..

@phoenixhernandez9855 2 года назад

I would buy their lamp right now too. The light diffusion and the ability to have any side be the viewable side is really the game changer here. I want it! ❤

@SixOThree 2 года назад

I want one too. It's gorgeous.

@maryshane5012 Год назад

thanks to this video i got so intrigued by the lamp and bought it for myself. was it expensive? yes. was it worth it? omg yes!! the lamp is by far my favorite night lamp. i can't sleep without it on and i would literally cry buckets if anything happens to it. idk i guess i just wanted to come back here and say thank u :>

@shiba18inu 2 года назад

They're both giving really dif vibes. But you guys just got your head cracking in there, with the light source! That was so cool, and it has the limitless edgeless feel to it.

@llamallamaunicorn3291 2 года назад

What if, with Simone’s recently discovered love of stained glass making, you guys challenged her to make a stained glass version of this?

@speedynspeedyn5171 2 года назад

When someone mentions two youtubers and u know them both: *happy dance

@AVspectre 2 года назад

She sounded like she was beginning a stained glass journey… it would be a fun day watch! :)

@NathyIsabella 2 года назад

Yes, I saw that video recently and was wondering "hmmm they (Evan and Katelyn) should've gave it a try... it doesn't look that much harder..." of course laser cutting it is much easier, but for the quality... (But for the reflective layer they would need to cut by hand or cricut it...)

@teddyboomabc 2 года назад

If the bought is glass it might be blown into a mold and there is a a coating for glass specifically for iridescent affects. Very hard to compare the make and buy cause they are both so nice and made in very different ways 😍

@CM-yu6ms 2 года назад

Yeah, I think it must be mould-blown, probably industrially at that price (hand blown would be more expensive). I don't know if the iridescence would be dichroic or something applied later like a spray or vacuumed film layer? They are both very pretty though! I think the buy would have benefited from a diffused light like the make for additional *ambiance* ✨

@phoenixhernandez9855 2 года назад

I didn't think of a mold but that makes a lot of sense for its look

@symark1971 2 года назад

Had to google it, the Corning Museum of Glass shows a video using heated stannous chloride crystals and then holding the glass over the gas to get the iridescent effect. Are there any paints for plastics that can create the same effect? More research is needed, this is such a cool Make :-)

@mwater_moon2865 2 года назад

@@CM-yu6ms Iridized glass is made by spraying metal salts on it while it's still red hot. Ferric (iron) chloride for more of an orange, or "marigold" coloring, with Chloride of antimony on top of that for more of a blue tone, and stannous (tin) chloride for the more typical rainbow effect. If it were dicro (it's not!) it would be metal vapors in a vacuum chamber, have to be done while the glass was still flat, and cost on the order of $2000. No really, a flat circle of dirco glass is 18" in diameter and cost around $200 all by itself, and dicro does not like the kinda temps you need for mold blowing so it'd have to be capped before the pressing and def hand done. The buy they have is a factory piece that was sprayed with stannous chloride as soon as it was taken from the mold before it was annealed.

@mwater_moon2865 2 года назад

@@symark1971 There are paints that contain pigment particles that can reflect light in multi directions, but the pigment is going block light going through it, it's more like micro fine glitter than what the tin salt does with glass. Now what E&K HAVE done before with resin (and I've even seen Ann Reardon from How to Cook That do it with chocolate since it's all texture) is use diffraction grating, which will make rainbows from any light reflected off of it.

@LiminalQueenMedia 2 года назад

I genuinely like the lamping system you all used over the manufactured one.

@_divinebeast_7168 2 года назад

The light is soooooo much better on the ones you guys made. Amazing work Evan and Katelyn.

@eileahfrye-edmonds413 2 года назад

I feel like your lamp is something I would buy over the other strictly on serviceability alone. Plus the rigid corners are more my thing. 🙂

@mwater_moon2865 2 года назад

Their light is no more serviceable. Once the LEDS start to fail, the specialty strip is under all those glued layers too.... So if you can get through the glues on either lamp to get to the light element itself, unlike what looks like a florescent tube, specialty LED strips and custom milled parts aren't going to be very readily available.....

@renn8827 2 года назад

@@mwater_moon2865 I don’t think that the layers over the light are glued on top of the light the layers are glued together but they are staying in place because of the frame surrounding it that is the gold mirror. So it is removable however I am with you on the fact that it would be harder to find a replacement if it was sold commercially vs a simple led bulb

@Mr_Daddums 2 года назад

To get the smooth edges, I'd say they use a vacuum machine. They get a sheet of plastic, melt it (sort of) and then just push it onto a mould. I used one in highschool so I can't remember the exact name of the machine but it was pretty cool

@niaimack 2 года назад

It's called a vacuum former.

@kallisoetidjo7902 2 года назад

they used something similar to make molds from potatoes a long while back!

@TatAlbring 2 года назад

But it’s glass, I think you can vacuum form glass right?

@Lukewarm326 2 года назад

Its just blown glass lol

@bizm 2 года назад

@@Lukewarm326 yup. it's just blown glass, they have a mold and blow a 'bubble' of molten glass until it takes the shape. also how they make bottles, jars.and lightbulbs

@KM-rt5jj 2 года назад

Omg they're both amazing. Your version looks so cool. Honestly after seeing all your work I kinda see why the original is so expensive haha. Wish you could do a hybrid! The glass shell and your light would be so much cooler

@Billiegoose 2 года назад

that was DEFINITELY one of the most beautiful things you've ever made!

@liamgleason3416 2 года назад

I think e DIY would look incredible on a rotating turntable, when Evan was spinning it around with the lights off it was mesmerizing

@djart4715 2 года назад

I was thinking the exact same thing!

@mrscb5303 2 года назад

@@djart4715 me too!

@janhavel8208 2 года назад

I like the sharpness and mainly smoothness of yours more. And you absolutely won in the light department. I'd definitely bought yours. I had blast watching your video yet again, so much fun!

@danielle.harrison 2 года назад

Your excitement over you how well you did was so great and well deserved

@creativelyclumsyfilms 2 года назад

Your guys wholesome relationship is a great joy to watch!

@LoviPon 2 года назад

The best way I've found to describe the difference is that the BUY is more fantasy-like (glowing fairy gem) and the DIY is more sci-fi like (very modern and mirror-y). I love both and would have a hard time choosing too!

@actuallynathalie4650 2 года назад

I totally agree

@thegerm22 2 года назад

BUY vs DIY is my favorite segment of your videos! It would be fun to see a friendly competition between the two of you where you each attempt the DIY on your own then compare them both to the bought version.

@lesleyvanrutten 4 месяца назад

I think your lamp is way trippier and more magical. Very well done🎉

@JuelzLoren 2 года назад

I smiled throughout the entire video, and I think your Infinity gem looks Amazing! It was soooooo fun watching you guys create this.

@DrJCoy18 2 года назад

Both are amazing, but I’d pick the DIY! The infinity mirror effect of the faceted sides and the better lighting is just *chefs kiss*

@DominusFeles 2 года назад

Probably the best buy vs diy to date! I’m guessing that the bought one could be casted glass 💎 I’d also like to see the glass crystal with the diy light source!

@PerpetuusTenebris 2 года назад

Oh, I'm pretty sure it is just casted ripple glass haha Whether it was custom painted or they used special glass, though, I don't know.

@zestygurl 2 года назад

Like em both. Very fraggle rock with a moon glow. The glass is a different beast. Interesting too how they make it.

@nexypaws Год назад

I discovered you just yesterday through your video of trying out 5 minutes resin crafts and I absolutely love your content and energy. Thank you so much for making my day

@junebug3719 2 года назад

your channel is one of the only channels i can watch when my anxiety is high - you guys really calm me down and create a safe space on youtube - thank you.

@Nonnitot 2 года назад

It's a good comfort channel

@mistygquartz3713 2 года назад

Same

@kleinesren7064 2 года назад

Right?! Me too! Calmed me right down. They are just so dang lovely

@clooneytune_ 2 года назад

having their stream vods on in the background when I'm having a bad anxiety or overwhelm day is the most calming thing... even when I'm not particularly interested in what they're playing they're just calming to listen to

@anjahoger-busch8579 2 года назад

"Some people have access to a makerspace. " It me!!! I'll definitely make something like this lamp. Maybe not as my fitst lasercutter project. I'm doing that next week. You two made me want to try basically everything my local makerspace has to offer.

@EvanAndKatelyn 2 года назад

have fun with the laser cutter!

@vidhoard 2 года назад

Subscribed just in case you make a video on it! ;)

@Mr.Birb- 2 года назад

OMG THE SOUND AT 27:30 IT'S LITERALLY THE SHINY NOISE FOR POKEMON LEGENDS ARCEUS

@hotchilly1000 2 года назад

Love your version - the facet reflection just amped up the cool factor.

@HameltheKamel 2 года назад

I agree with the results! I really like how you can remove the top of yours, since that means you can put some other stuff in there if you wanted. It's like a magical display case lamp.

@maeveburgess4553 2 года назад

what a glorious thought!!!

@emilyjones9787 2 года назад

Personally I like the DIY more!! The clarity of the entire lamp plus the uniform sides makes it a perfect fit for people that like dimmer lighting^^

@abelpolanco 2 года назад

Thanks for Sharing , you two always cheer up my day ! 😊🙏🏼❤️

@klfjoat 2 года назад

As always, Katelyn is THE BEST editor!

@thespankmyfrank 2 года назад

Omg okay, I found your channel like a few weeks ago and this is my first new video to watch. I'M SO EXCITED. It feels weird not watching 2 year old videos but something that was released 2 minutes ago??

@rebecarojas6851 2 года назад

Welcome to the fam! We're often an odd bunch but still good

@EvanAndKatelyn 2 года назад

Welcome!

@galinilivanov3660 2 года назад

Welcome to the club!

@fiji459 2 года назад

Welcome to the community :))

@Forbbiden7 2 года назад

Welcome

@ez8314 2 года назад

Saw all the iridescent stuff in your Instagram, I've been so excited for this project!

@EvanAndKatelyn 2 года назад

the shiny is strong with this one!

@Guitargoddess843 Год назад

Thank you for savoring the peelies! It came out great and the peelies were bonus satisfaction

@LIZMinion Год назад

I love your lamp more because from the view there is more colours. Plus its looks great with light off and on

@AWildVixAppears 2 года назад

A mini version of this light plus Katelyn's beloved stick from the garage video would make a rad fantasy staff! Also, I adore the glitter resin "welding." It looks SO cool!

@leahschrum2461 Год назад

A STAFF WOULD BE SO COOOOL

@Eskiwen 2 года назад

Honestly, I really like both of them! I will say yours actually looks more 'natural' to me in shape, as the 'cuts' so to speak mirror actual stress lines in large chunks of crystal! A smoother gem or rock like that has often been tumbled beforehand, so yours definitely feels like it came straight from the mines opposed to having been prepared for a few hours. Source: I was a pretty big crystal nerd when I was a little kid, lol. You can notice the same jagged semi-irregularity if you've ever had rock candy because sugar crystalizes! Either way, great job!

@babakfp 2 года назад

I'm so glad that RU-vid recommended this video. I loved it very much😍😍

@jacquelinec6257 Год назад

OMG, I love the one you guys made so much more it's so beautiful!

@NickOtinAddiction 2 года назад

MY COMFORT CHANNEL!!! Love you guys, you're the sweetest and most funniest people, I swear! Lots of love from Germany haha

@H3aling808 2 года назад

Mine too

@kleinesren7064 2 года назад

same! Both th comfort and the German greetings :D

@crystalcharee57 2 года назад

This is my favorite thing you've ever made. If I had to choose which to buy, I would go with yours because the design and function are far more thoughtful. Aesthetics would be a tie if the lighting element on the glass lamp hadn't been so poorly thought out, but I really don't like the idea of the glass lamp only looking good at certain angles -- especially for $200. I would say, on yours, it might be interesting to layer the "sauter" resin a few more times so that it looks more purposeful, but overall, really love the whole thing. Would love to see you revisit this project at some point and see what you would come up with if you were designing, rather than duplicating.

@AlexaFaie 2 года назад

Solder is the word you're looking for. They pronounced it wrong, its meant to sound like sol-der not sauter. 🤣

@missbeaussie 2 года назад

Some moss or coloured resin drips 😍

@dr_sera 2 года назад

@@AlexaFaie you can pronounce it both ways, both are correct.

@lestranged 2 года назад

@@AlexaFaie I usually hear it pronounced "sodder" with a silent L

@mwater_moon2865 2 года назад

@@dr_sera that may be, but it sure as heck ain't spelled "sauter"

@raybeaudry463 2 года назад

This is my favorite series 👍you guys always make me smile thanks 🙏

@Luckmage26 2 года назад

This is the first video of yours that I watched and I gotta say I'm absolutely in love with both of you! You're amazing, guys! Thanks for your hard work and incredible energy!

@shaunacorrigan9372 2 года назад

I've been waiting for another Buy vs DIY! So excited for this, let's GO!!!

@minii7552 2 года назад

That lamp around 16:08... It made me think how cool would it be if you put cotton poofs like clouds or a nebula. Nebula trapped in a crystal lamp 💕.... Pocket dimension lamp.

@Codyhdoyle Год назад

Love yours way more also it has the function of being able to put something inside to mirror without the light distraction

@briannawoodard3306 Год назад

yess like the aesthetic of y'all's would fit my room way better but i loved them both!!

@LittleLuckyLotus 2 года назад

These could make for perfect bedside table lamps on your now repaired end tables 😄

@GraysonQuickBuilds 2 года назад

Y'all should try crayon melting art! I think it would make a really good video!

@GraysonQuickBuilds 2 года назад

Then again it might not make a good video idk

@SAmaryllis 2 месяца назад

Both the diy and buy are so pretty! Y'all have such fun chill silly vibes, I loved watching the process

@AhhhSukeSuke Год назад

Couple goals. Love the team vibes 🙌. Also.... very impressed with recreation!!

@crichards037 2 года назад

I feel like there should also be some credit due in the fact that for the DIY, pretty much everything went exactly to plan. And to be fair, how often does that really happen in these kinds of builds? Yours came out spectacularly well!!

@orange-micro-fiber9740 2 года назад

This is one of my favorite series of y'all's. It forces you to stretch and design in different ways. You come up with neat techniques to replicate the buy design.

@dismurrart6648 2 года назад

This was my first vid I've seen from yall and really like you guys. Great job!

@AMiniki Год назад

I would LOVE the shape of the purchased one, but the lightning of the one you made is just perfect.

@emoemi907 2 года назад

Tbh I absolutely love the moody light that your diy version gives, it’s much nicer as an ambient light 💛

@danasaucedo9605 2 года назад

love them both! Building a rotating base for it would be amazing! that way you can see all angles without having to move. I just loved when Evan was rotating the DIY version in the dark

@charityelclibeth6175 Год назад

I think all of your creations are AMAZING, but this one is the best! Yours looks 10x better!

@Taracinablue 2 года назад

I prefer the colors and smoothness of the bought one, but your diffused spiral is much superior =) What a fun project!

@fairelymaid7145 2 года назад

I love the new buy vs diy graphics. Super clean and proffesional looking!

@wandaXmaximoff 2 года назад

They’re both amazing but I like the DIY more because there’s something so satisfying about making things yourself.

@dennisbarker5986 Год назад

I love your creative process. I love the use of uv resin

@armandoa2484 2 года назад

Wow! They are both great but if I had to choose, it would be your diy! The light is defused perfectly for a great view at any angle and not blinding. Great job 👍

@vidhoard 2 года назад

12:46 - Next Project: Making a resin/wood floor mat to protect our nice resin garage floors 😅❤

@lemonysnickette 2 года назад

You two should be proud. This is the most stunning builds I've seen from this channel. That light is so cool!

@crazydevil1543 2 года назад

I found yours to be so much better than the other one!! ❤️

@daleleibfried8648 29 дней назад

I like how confident evan is in the beginning. Then katelyn brings in subtle hints of reality ❤😅

@mabelrivera3992 2 года назад

The result is so gorgeous! I would love to see them do an LED "neon" rope project. Kinda like the neon rainbow in the background but way more intricate.

@AVspectre 2 года назад

I saw somebody making neon lights in a diorama by threading a strip of LEDs through a hollow flexible tube (a 3D printer part like a filament ‘extruded’(?) that allowed for shaping and diffusion and MY MIND WAS BLOWN

@ninanaushad7471 2 года назад

I love the shape of the buy but you guys win in every other aspect for me 😂

@fidelianerina 2 года назад

same! the only thing the buy had going for it was the smooth edges. That's it.

@paula5540 2 года назад

I think the bought one exterior with yours interior light would be perfect!

@Kalina_009 Год назад

I love yours WAYYYY more! And I love all your projects too!

@ashleighenglebert7645 2 года назад

Have you guys ever looked into tumbling rocks? I have a few going on their second grit right now and they're coming out really nice and I feel like it would be really cool to see how you would use them decoratively or to probably accent different resin crafts lol

@persussle- Год назад

I would be really interested in seeing a cheap vs expensive video on that!

@FiMilton 2 года назад

I work in my colleges makerspace and I love seeing you two use some of the machines we do! Would love more CNC focused videos! ✨

@Spice_flake Год назад

when their both turned on the bought one looks ore like a gem but i personally like everything about the one you guys made more. so realism goes to bought but coolness and everything els you win

@randomclips8493 2 года назад

Loving this new editor. They are amazing with their skills.

@bethanylyrock8396 2 года назад

Y’all are starting to get into the architecture side of things, I like it 😁 well model making because that’s literally all I’ve been doing in my class

@aundilthebard1053 2 года назад

Yours looks like a sci fi display case, feels like it should hold some kind of ancient relic. Love it

@lindwurmchen Год назад

This being a perfect tie is so satisfying!

@bergrritothebeggoon Год назад

I love yours personally, it's colours are so much warmer and the light reflects better :))

@randomjunk2131 2 года назад

Love this concept, especially given the price of things today. Can’t wait for the next one!

@user-wb1xq9gu4b 2 года назад

I like the DIY more! The geometric, sharp, modern design, and mirror finish looks really awesome - and the light is definitely more incorporated into the design. You guys did a great job!