BUYING A DRIBBLE BAR? THIS IS WHAT YOU CAN EXPECT 

I just built a homemade dribble bar for my tanker, applying pig slurry. Had to get local machine shop to make my manure distributor with no chopper needed. I noticed a big reduction in odors on wheat stubble. I appreciate your video and agree it was a big learner curve, but also fun. Thanks for the ideas and info. I am farming in Ontario, Canada!

Another great video Adrian great drone footage 👍👍👍👍🇬🇧🏴󠁧󠁢󠁳󠁣󠁴󠁿

Good to hear your learning curf on the dribble bar. And it is a nice system. Clean gras happy cows.

Cracking video as always. Your channel is fab you give the honest truth in everything you do.

Another fantastic video! The fact that you take time out of your day just to show us all how and why is amazing what a lad! Top bloke! And that view at the end 👌oh and glad you sorted your balls out 😂

Great video Adrian, some detailed video on dribble bar, as always u don't hold back on any details good or bad.

Good honest review 👌 and good to a Massey can operate a dribble bar…. 😉😅

Great video as always keep up the great work and videos and mind yourself

Hi Adrian, to a non farmer how long would you leave the field before letting the herd back in on it to graze? Thanks

Another great video Adrian

Hello from Moosomin, Saskatchewan, Canada great videos thanks for sharing

some good things come from tweaking different industries so they are more environmentally friendly and the dribble bar looks like one of them - the cows certainly tell you if they are not happy and they are happy with the new system of muck spreading

Great video Adrian as always 👌

We find if u put on the macerator first it will never block with bits of silage, 10 seconds with no slurry doesnt put it up or down

Enjoying the honesty, and the content. Very interested in the way other countries do farm work compared to my country. Especially a smaller farm.

Great video Adrian ,on a video back what was the brand of the,I guess three point forklift that you used thanks

Whipped cream🤣🤣🤣

Solenoid?

First

How good that tractor looks with the frontloader! Must be a delight to work with. Don‘t make it dirty!!!!!

Thanks Adrian for that great insight into the use of a dribble bar. We are still using the splash plate here up in Antrim but It’s only a matter of time until dribble bars will be compulsory. Like you we have some steep and awkward places and with the additional weight of the dribble bar it will make this job a bit more difficult in places for sure. Thanks for sharing.👍

Very interesting and well edited video, well done Adrian, your a great sales man for Farming, thank you for sharing good luck to you and your family

Love the self deprecation, a quality trait. Have a good one, see you after Adrian 🍻

For your hydraulic change from spread to fill if you slow down the oil flow on the spool it’s a lot easier to get into neutral

An irishman talking shit! NOooo. I jest. I'm a new sub, really enjoying your channel.

Well said Adrian, the hills make a serious difference when it comes to power requirements 👍

Great video again Adrian. I’ll need to put one on my Joskin tank. I wonder will trailing shoe type ones or injecting it be forced on us eventually. Definitely spoiling silage is my biggest fear as it doesn’t breakdown as quickly as the splash plate. Nice finish to the video also😆😆

very interesting how you do it. I have all my manure injected into the soil on GPS. In my opinion a better uptake of nitrogen, a denser lawn with a higher yield.

I think the word you could be looking for to describe the thickness of the slurry is "viscosity"

Great video Adrian, a man who never made a mistake, never learned anything, keep at her Lad!

Another decent information production. Thanks 🙏 Adrian .

Lol. I love the way you poke fun at yourself there’s not many would admit to having the boom up while the muck flies 🤣🤣🤣🤣👍

I didn’t realise that the macerator takes a lot of power and you slow down on the hills

Love your honesty! You explain everything very well… I’m not a farmer… half acre veggie patch is my limit… but I love watching your videos! Stay safe!

Haha you cracked me up,on this one 😂 the funny side just popped out of the blue,but again a cracking video brill mate.Really enjoyed it.

Think it’s time you had a pair of “working slippers” set aside for that loader tractor, it’s looking very tidy so I’d be mighty upset if you’re getting in it with dirty boots 😱

The end was funny Adrian. As someone else said in the the comments, self depreciation is a good trait to have!!!👍

U should look about an old reactor for round the yard maybe a 390 290 something like that

So Adrian I am coming to the video late in the day. Been helping my eldest daughter clear out her house after having to evict her Tennent, for not paying her rent. Massive clean-up and damage in every room gonna cost her a tidy sum to put things right. We have been hard at it for five days solid. Six full car loads to the local recycle centre. I am knackered and just about to crack open a can of beer. Watching your video I heard several references to the slurry being thick. Excuse my ignorance but can you not add some water during the mixing process.

Bit of a butt clencher at 0ver 9 Tonnes with a full tank. Doesn't take much on a hill even on dry ground.

Macerator definitely takes some horsepower. We used to always drive the tank in 540economy before. Back to normal 540 now and more rpm on the tractor to cope with the horsepower loss on the macerator Very happy with our mastek one once we got used to it Ps Your not the only one to forget the switch for the macerator 🤣

Your some laugh Adrian especially your last comment!!🤣🤣

Your costing me a fortune trying to keep up!

Pulling a 2600 tank with 9m trailing shoe with a 155hp tractor.. Spent 1k and chipped the tractor to 170hp when pto is running.. Best money spent! Struggled on hills like yourself but now it's no problem unless it's a very steep one!

Ha. Now I was the first one.💪 Yesssssss

Hello, I am a farmer from Austria. I've been looking for a DRIBBLE BAR like this for a long time, which is light and good. Approximately what price can you expect? And I really enjoy watching your videos. Thank you for your great work.

Have the same bar on a Major 2670gal Alpine tank with the stepped axle. The Mastexk bar is mounted on the big rear door opening part. It wasn't mounted square on the opening so the bar is not perpendicular, the thing kept catching pipes during g the closing process, but by adjusting the stops on the break back you can get it aligned. It is not totally straight however. I made up a bracket to prevent the cunting pipes fouling on the transport bracket so hopefully it's less of a pain to use now. Pipes coming off is a regular occurance, makes me think do they shrink over time because there's hardly any pipe to spare

I think the word you were looking for to describe the contents from below the slats, was consistency!

Hi Adrian, great genuine video. Two comments, at 1.50 i hope you closed your back window. I've seen nasty things happen! Second point, i run a belmac 2350 with 8metre trailing shoe bought in 2019, run on a 120hp massey 5712S, and never once had i to lock the spool valve lever in position to run the macerator. I believe there's a restriction in your unit and its this thats soaking your power. On the belmac you'd never notice the hydraulics taking power, but if caught on a hill, knocking the pto off briefly gives you extra horses. Macerator should be easily run as its just a spinning motor really

How. Are things in Glocca Morra looking well Adrian

Evening Adrian Yes I find at times, using the word “balls “ can be a bit offensive to some. I am working in France and just use “liathróidí “ Covers most situations!

Brilliant

Great video again Adrian 🚜👍try and change the %off oil going to the 3point linkage. On the dash off the Massey ferguson.

Would the wee t20 run the slurry mixer? Be alot easier on juice

Fab video Adrian why is your ground green we total toast in the south east.from jp

Your neighbor won't be happy when he sees you showing the fert stripes and his field 😅😅 we've all done it

Why do you leave your link arms down instead off up out the way

Run 2500 gallon Abbey with an Abbey dribble bar runs three sets of pipes so there's no need for electric switches with 155 horses in front and electric spools makes the job easy.

Skittery 😉🤣 good work as usual 👏 we don't do slurry but I can see the bonus with the dribble bar on the grass st least the cattle can still get a bite . How you getting on with the trimble? Stay safe 🏴󠁧󠁢󠁳󠁣󠁴󠁿

Good video again and fair play to the effort u put into each 1. Crawford gave you a shout out today on his live video.

Dribblebar is a nightmare with roundbale silage.

Honest video enjoyed I came across another cavan dairy farmer #dronedairys

You should turn your eveshoots into the slurry tanks and/or get pig slurry delivered , that's what your problem was with cows being unsettled, wasn't watery enough and the slurry was sticking to the grass.

each one of those down pipes is a cows back end, thats the only difference ones mechanical one natural, but you can spread manure on a field without cattle over grazing it while fertilizing it.

Very informative. Thanks

Have tank like yours looking at dribble bar for it at moment have to this video on replay

Good honest review Adrian tractor 🚜 and machinery maintained to a very high standard ! No bull shit with you tell the thing the way it is so other people out there can learn from your experience thank you 🙏 for that that is why your channel is doing so well best of luck to you for sharing that with us thanks

Comment for the algorithm to help the channel 👍👍👍.

Excellent vid very informative

Respraying the loader and bonnet really make a job of it new type stickers look well👌

"Me balls are too big, don't even go there"... Challenge ACCEPTED... 😆 🤣 😂

Some texture in that slurry lad

Great video, cam I ask how you didn't get the grant on it

Absolutley brilliant video adrian very entertaining 🤣🤣🤣 did you ever get that farmers name adrian with the boom up and the slurry going out🙈🙈🙈🤣🤣🤣🤣

Very interesting video Adrian great to see how things work 👍 👍

Great video Adrian that 54 looks 👌 Great

Good man it's good work

I like how honest you are Adrian

Great insight into it working Adrian.

Hi Adrian glad to see you are still putting in the paths for the Rabbits! haha

Thanks for sharing your vids with us!

Got one ourselves... there a great job

Such a load of s…😂😂😂

Do u change direction of maserator every load as it helps keep the edge even on the inside 👌

Brilliant

4:34 is that what Farmer Phil calls the lollipop?

What happens if you dont have a constant flow on ur hydraulic lever ??

Adrian do you still have the stainless exhaust you got made for the case as if you do I’m intreasted

It really is a load of shit. I’ll have to disagree splash plate grows grass better. The silage is full of slurry as well

Good video there Adrian. How are the projects (quad & tractor) coming along?

Wartss and all as usual ...thanks Adrian 👍👌

Great video as always how did that field do that got poached with the cows After the down pour of rain earlier in the year

That tractor looks incredible

Adrian have you tried reducing yhe oil flow for your third spool on the tanker to make it easier to have it in neutral?

How many have driven out the field and forgotten to lift the arms though?

👍👍🙏💗🇮🇪

What does the macerator even do Adrian?

We had one and i took it off because i couldn't see where i put the slurry and i didn't put any did you have that problem at the start adrian

Brilliant video! When you change the pump on the slurry tank from spread to fill or from fill to spread why do you have to leave it in neutral for a few seconds first, I seen a lot of other channels do that! Also what PTO rpm does the vacuum pump run at or is it just PTO on and no revs? Good Video! 👍

Thanks for your honesty. I hate slurry in line and then it cakes on grass. I know farmer who pulls chain harrows across the lines. In my set up I will have different tractor drivers using it so will be hard to train them. My farm very hilly especially in spring trying to pull up hills. I’m not fan of it. Extra diesel required to pull it and production of pipes etc does it help environment much or does it help create market for machine manufacturers