To configure on the bench, required equipment includes a power supply, a digitalmultimeter (DMM), and Field Communicator, AMS Device Manager, or a LOI - option M4.Connect the equipment as shown in Figure 2-1. Connect HART® Communication leads atany termination point in the signal loop. To ensure successful HART Communication, aresistance of at least 250 ohms must be present between the transmitter and the powersupply. Connect the Field Communicator leads to the clips behind the power (+,-)terminals on the top of the device. Avoid exposing the transmitter electronics to the plantenvironment after installation by setting all transmitter jumpers during thecommissioning stage on the bench.
11 окт 2024
