Camaro 5th Gen Oil Pressure Sensor 

Major props to you for being fearless, diving in as a novice DIY mechanic. Big respect and very helpful.

I just want you to know that I just fix this in my car today and I wouldn’t have been able to do it without this video!! Thank you saved me a lot of money!

I really appreciate you doing the hard work and research for us. You ran so that way everyone here could walk. Major props

I was able to fix mine using your video. You saved me big time. Please make more videos like this. I’ve watched this about 100x already!

I’m glad I finally found something online that actually gave some good information. Thank you man!! Great work btw

Hey young lady....you are my hero l have a 2012 Camaro. I am 76 years old and you inspired me to replace the sensor myself rather than pay a dealer .kudos to you young lady keep up the good work

I want to thank you for your video!! Being a female and taking your car to a mechanic to fix can suck!! The estimate I received for replacing this $35 part was $686.00!! I came across your video and if you can do it I can too!! Big thumbs up and a high 5!! You Rock!! Can you tell me how to change the blend door for my A/C without taking the dash out?

Thank you for this video. Helped out so much more than you know. After watching this, I noticed that my sensor was covered in oil, too. This could be why it goes out and periodically gives a "Oil pressure low - Stop engine" sign. I'm guessing from the oil filter above the sensor.

Good job diagnosing and repairing! And good on ya for covering the wires!

This was super helpful! I couldn't find anything online about the location of the sensor. Thankyou!!!

You're video helped immensely. RU-vid mechanics is about about trial and error and helping along the way.

Enjoyed your video. Very detailed and very helpful. Cudos to you for being fearless. Great job! I'm about to tackle mine but I have a 11 RS. Camaro.

Man thank you so much ...I thought it was in the back behind intake from watching others but I noticed they all had ss camaros afterward. .I took the whole intake apart 🤦‍♂️..thanks again

This tutorial helped me so much and you are a DIY woman is a big help also...us women need to stick together ❤

Thank to you I was able to fix my camaro I looked all over now no more ding and low oil pressure warnings

Much respect for what you did most people would’ve just taken you to mechanic you did a good job young man

Awesome , you are a saver ...for lot of people...

Great helpful video 10/10 recommend changed it in 10 minutes thanks wouldn’t have been able to do with out this video and only one for this model on yt

Yay! I get to do mine tomorrow Sunday. Mine keeps saying Low oil, stop engine immediately. Because we drove it without fixing the leak one day. Might of ruined the sensor once we fixed the problem. Anyways, thank you for uploading your time with the project. You made it look so simple. God bless!!

thank you so much. Absolutely loved your video. Was funny and now I know where to do my OPS.

Was able to change mines thanks to you. Mych appreciate.

Thank you for the video. I saw videos that said it was behind the engine as well. Maybe I can do this myself now.

You did a great job proud of you that was pretty awesome I enjoyed it I have a 2012 Camaro I was trying to figure out where the oil Sensor is located

Thank you so much for this detailed video. My car is having the same issue.

Awesome thanks ! Very informative They have no vids for v6 models

Thank you. I'm one of the ones that like working on my vehicle to

Nice job tackling this and videoing

This really helped me out a lot. I couldn't have done it without your help. I was so scared it was another issue besides the pressure sensor but thankfully it was just this. Only thing I'll add was the securing washer was deformed in my car so I had to turn it to remove it. I was scared it was glued down. Maybe it was melted idk.

This is by far the best video out there on changing out the oil pressure sensor for the V6 3.6 LS. Had mine go on a 2012 and I noticed zero pressure on the 4 pack gauge and no codes. It would intermittently go up to max and jitter wildly and fall back to zero. Went to Autozone and they said they seen a lot of these go bad and get replaced. Autozone part comes with a lifetime warranty so there’s peace of mind there besides they are very encouraging of diy weekend mechanics. I needed that and gained confidence from this video to attempt it.

Good job, you done good.!!!

Great video !! What size socket did you use to get the oil sensor out ? My oil sensor has gone bad too

That’s an easy and simple job

Good Video! 💪🏾

1 1/16 socket or 27mm. also you can bend the line in the way a little to make more room

Hi one question was your check engine light on before you change it? Thanks and great job

Good job !

Thanks!

This exactly what I need to do to mines…..thanks I couldn’t find it

Thank you so much

Hey my oil pressure is indicating 5bar from start up to after been driven for a while. No engine light on. Think this will help?

bravo thank you

Now I’m wondering if mine is in the same spot! Many people say it is located behind the intake on top of the engine. I have a 2016 Chevy SS .

Thank you

Gracias carnal

What size socket you use for the oil sensor I have a 15/16 size but it doesn’t seem to fit

is this the same fix for the oil gauge staying at zero on the center console?

so i been having some issue with mine and my dash it shows the message low oil pressure stop engine it comes on and off a lot would this be the problem?

What size socket?

Did you have to drain the oil to get to this part?

Can you please tell us what made you want to change the oil pressure sensor? Was your dash advising you of it? And to stop engine.? Because mine is saying the same thing. But no leak, not knocking, temperature is normal. Just ever so often, usually at start up. It announces this message? It would greatly help me out?

Where you getting a low oil pressure shut engine off indicator

My dash is saying low oil pressure stop engine. I was thinking it was a sensor, so I took it to the shop yesterday. They tell me that there is metal particles in my oil. I don’t know how that would have happened I’ve always gotten my oil changed on time and I always get full synthetic oil which is recommended for my 2010 Camaro SS. I love my car I’ve had her close to 9 years. She runs fine to me the message scared me so I took her to the shop and they’re telling me that the fix is $13k🥴. The low pressure oil stop engine comes on/off periodically.

I'm never taking my Camaro again. I'm being lazy as hell, I'm going to put all my tools to work. I had an oil leak coming from my oil filter housing and it destroy my ac compressor. I have to address the leak before installing the the ac compressor but I'm trying to find out what the name of the thing on top of the ac compressor.

LITTERILLY

Till wensday

THAT’LL BE 400 DOLLARS!!! CROOKED BUTT car mechanics!!! Lol! THEY WOULD’VE RIPPED some people off, for real ya’ll! Thank God we have WE NOT LAZY to show us how to do a low dollar repair! 👏 👏 👏

2.5 over 1 hole

What’s the maker and model of your Camaro

Good job !