Camaro Fender Badge Removal and Review

Подписаться 2,6 тыс.

Просмотров 6 тыс.

50% 1

Wrenched Out Garage
After thinking about it for awhile we finally go after it in this video. The Chrome 6th Camaro Badge located on the fender gets removed. This is a simple process and should only take about 30 minutes total.
There are a few ways to remove this fender badge on the Camaro. We opted for the heat gun if you do this take your time and move the gun around the badge. Do Not Blast one area. Oh, yea it’s going to get hot so be careful. Then peel off and you should be able to easily remove the adhesive that remains. There will more than likely be some residue so take your time to clean it up and Done. Of course, you can use fishing line as well to remove the badge.
Make sure and hit Subscribe and check out our other videos as well.
The Gear
Goo Be Gone
amzn.to/2FyulDK
Turtle Wax Bug and Tar Remover
amzn.to/2r12q5s
Wagner Heat Gun
amzn.to/2R3TbwS
Make Sure and Stop by our websites as well
Check us out on Facebook @
/ wrenchedoutgarage
Check us out on Instagram @
/ wrenchedoutgarage
The Website
www.wrenchedou...
#badgeremoval #garagelife #wrenchedoutgarage

Опубликовано:

18 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 12

@WrenchedOutGarage 5 лет назад

So we went with taking our badge off, but what are you thinking about on your car- Remove, keep, move or replace ? Drop a comment

@michael-ev5fk 5 лет назад

Very good Anthonie. 👍 My wife has been asking me to remove those emblems from my Camaro, but I haven't made up my mind yet. We'll see. A member on the Camaro 6 Forum made a keychain emblem with his by gluing them together and drilling a small hole for the key ring. The ride is looking very Darth Vader like.

@R__K 9 месяцев назад

What did you end up using for cleaner there? I think you mentioned goo-gone and another option. I saw 2 other videos on emblem removal/replacement. Both worked but both completely different routes. Mark Grovenor (Aussie Camaro owner) used a heat gun and kept feeling the Camaro to make sure not too hot to the touch during removal. For replacement, he used an actual size print-out paper of blacked-out Camaro lettering above where he lined up the blacked-out letters he was placing. Exile Performance used a hair dryer to heat glue/adhesive behind emblem and fushing line to get it completely off. He used Goo-Gone to clean up residual leftovers. Placement was kind of mind-bloeing in this video though... he uses painter's tape but left it on for duration of video--diring heating of old emblem through placement of new emblem to maintain accurate placement. It seemed risky but it worked for him.

@lilsobelizard01 4 года назад

I have a ‘17 red hot camaro and looking to add the old school ‘69 camaro lettering. I’ll probably end up keeping the original camaro badging like you have just in case.

@nickydrifts 2 года назад

Your car is like the inverse of mine - black with white hood.

@marvinholden3876 4 года назад

Thx bro...that really helped...

@marvinholden3876 4 года назад

Thx brp

@alexmiranda8042 5 лет назад

Happy Thanksgiving

@WrenchedOutGarage 5 лет назад

Happy holidays Alex

@melvinmccoy72 4 года назад

I have a 16 RS and wanna keep my emblem.. it got chipped and the red was chipped off of the emblem so I have to change mine. Question: how long you had that heating gun around the emblem as ive heard someone say before if you keep it on their too long it can damage the paint

@WrenchedOutGarage 4 года назад

Hi Melvin, Great question- whenever I use my heat gun on any type of adhesive removal to include the badges on the Camaro I do fairly quick and even passes for a minute and do not hold the heat directly on the paint. Do several passes in a sweeping motion and you will feel the adhesive start to get tacky like it was for install and remove it. There is no specific time as the bonding on every emblem is different and yes it is correct if you sit there blasting your paint with the heat gun it will do damage. It’s very simple and just pay attention and you got this. Great question and have a great day

@melvinmccoy72 4 года назад

@@WrenchedOutGarage alright. Thanks for the response. Have a good day as well