Can-Am Defender | 3 Inch Lift Kit Install | How To | SuperATV

Подписаться 29 тыс.

Просмотров 40 тыс.

50% 1

Looking to get a little extra ground clearance under your Can-Am Defender? SuperATV has you covered with their easy install 3" lift kit. Sit tight and let Braden show you just how easy it is to install our 3" lift kit on this Can-Am Defender.
Can-Am Defender 3" Lift Kit:
www.superatv.com/can-am-defen...
Check out our full line of products for the Defender:
www.superatv.com/shop/canam/d...
#SuperATV #LiftKit #BuiltForBattle
00:00 Intro
00:11 Tools List
00:17 Remove Tires and Disconnect Shock
00:53 Remove Shock
01:51 Place the Shock in the Compressor
02:28 Compress the Shock
03:23 Reinstall the Spring
04:34 Reattach the Retainer to the Shock
05:30 Reinstall the Shocks
06:02 Reattach the Hardware

Хобби

Опубликовано:

2 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 21

@billnobles7650 Год назад

Super atv looks super easy. Damn, wissh i had shop with tools machines ect. Thanks. 6 min vid. Installed the blinkers,horn flasher kit. 20min vid, took me a week. Shade pAlm tree mechanic Thanks

@jaredslaughter8960 3 года назад

I ordered this kit but for a maverick sport , avoid the kit like the plague.

@jameshilt6826 3 года назад

I purchased this kit and according to your mechanic in this video there is a difference between the front and rear billits. There is no difference at all between front and rear spacers so did I get the wrong kit? Please answer this

@javierlamadrid6370 2 года назад

I have a 2020 can am defender hd 8 comes with stock 27 inch tires can I run. 30 inch tire on it with changing my clutch and belt I also have 3 inch on it so not worried about clearing just don’t wanna mess up clutch or belt thanks

@ncbrothad 3 года назад

Where do u take a spring to get it compressed ?

@jameshilt6826 3 года назад

So I purchased this kit and there is no difference in size between the front and rear spacers. Why?

@madman11331122 4 года назад

I'm no expert but didn't you just make the suspension SUPER tight by compressing the springs another 3"? That's not a lift, that's just making the suspension super tight so it doesn't have any flex.

@q8fly. 2 года назад

No replies to questions in the comment section but yet you keep on uploading videos.

@bobmartin8339 2 года назад

Compressing the springs did not add 3" of lift. How did you add any lift to the vehicle? ( I used to be a GM trained mechanic, aka Mr. Goodwrench, now retired)

@unclebilly1353 8 дней назад

This video makes no sense. Make me want to stay away from superatv.

@chipsterb4946 2 года назад

Can someone explain the benefits of this method of lifting vs. a bracket lift kit?

@DudeManBroShow 2 года назад

Especially when they offer this method for the can am and just a bracket lift for the polaris

@chipsterb4946 2 года назад

@@DudeManBroShow since my first comment I’ve found a 2” lift for a Can-Am defender that uses brackets in back but additional spring compression like this in front. My guess is that brackets are going to change the suspension geometry no matter what while coil spring spacers extend the shock more along its intended line of travel. Or it could be that too much spring preload in the back makes it feel like you have no suspension at all. 😬 I do wish these guys would answer reasonable questions …