Can-Am Outlander Oil Change: Walkthrough Guide

Подписаться 14 тыс.

Просмотров 63 тыс.

50% 1

Thanks for watching! Please Like, Share, and Subscribe!
Check out our Gear and Tools: www.amazon.com...
Follow me on Instagram: @trailpass_channel
Check out Sparks Parts for all of your Genuine Toyota Parts:
www.sparkspart...
Sparks Parts Discount Code: BANDIT

Опубликовано:

7 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 48

@donaldalls651 2 года назад

I just took an oscillating tool and cut the part of the floor board that was blocking the filter and made this whole process much much easier. I don't have to take any thing apart.

@CLB-Photographie 2 года назад

Great Idea thanx

@vection2249 3 месяца назад

I was thinking the same thing when he started pulling it all apart.

@toddseagle 2 года назад

Just changed my filter without taking ANYTHING apart. It’s easy , just pull the footboard plastic out (slightly) and everything comes out , and goes together again without any issues.

@TrailPass 2 года назад

I'll have to try that next time

@xtegaming6957 9 месяцев назад

Is there room to tighten all the bolts on the oil filter cover if I just pull it out?

@toddseagle 9 месяцев назад

@@xtegaming6957 absolutely, I had no issues.

@tomgiovanni5885 6 месяцев назад

Me too. I was wondering why he took the whole side of the machine off.

@4x4Pikester 3 месяца назад

Did mine yesterday trhe same. 5 minute job. Just use an 8mm socket instead of the torx on filter housing bolts. The plastic is plenty flexible enough. I guess if doing it somewhere cold it may help to warm it up a little before bending though.

@gregoverley5349 2 года назад

I love how manufacturers sell the complete oil change kits. They are super handy and make regular maintenance much easier.

@francoisboyer3359 2 года назад

Pain in the butt!! I will go to the dealer once a year. Thanks!

@TrailPass 2 года назад

It's definitely a process!

@mouseclicksforu9724 2 года назад

@@TrailPass I thought it was easier and cheaper! Im watching the video because Im curious!

@slob259 2 года назад

Dealer wants $500 to change the oil here in Denver

@dannysanchez8400 2 года назад

Very thankful 🙏

@brucemacdonald4672 Год назад

Not really hard to do.

@GoldCountryTrapping Год назад

I'm probably going to get one of these in the 6x6 version but all these can am maint vids are a sales campaign for Honda/Yamaha...LOL Gid vid, thanks.

@topgunpressurecleaning8930 2 года назад

I cut the plastic out to access the oil filter cover.

@Yamacamkaw Год назад

How does it look?

@cselfie7234 2 года назад

Just bought one. Thanks for the tips.

@Yamacamkaw Год назад

Do not remove panels or cut the plastic. Just pull it away and remove filter then pull away and insert new filter. I just did it on my 21 450 outlander

@marksjunction69 Год назад

I have owned Can am for years and you only have to remove the plastic that is closest to the engine under the right front wheel well. This was a standard process on Can Am and Suzuki. The only difference between these two units is the Can Am is a paper filter and Suzuki a regular hard cased filter.

@punkywood3037 2 года назад

Getting the footwells back on is the hardest part! Lol

@woodmanfloorsanding2022 Год назад

Nice if he said the year?

@TwinTurboToyota 2 года назад

I’m waiting on my 22 850 dps

@wadekpogoda1203 Год назад

Dzięki wlasnie kupilem Polska 450 zarabista i mocna .pozdrawiam

@freddyw4555 Год назад

In the 570 a person said remove the front wheel well cover and 5 push pins

@jollun4561 Год назад

Yes, shame this video wasn't on the 570. Because I'm having a headache putting it back.. These videos are really clear, so it would've been nice :)

@dutchmccutch615 8 месяцев назад

My 570 has 6 push pins.

@CYOTsNiper 2 года назад

What’s the process of cleaning the air filter?

@mrlariata9290 2 года назад

Great video thank you.

@homeasiam 2 года назад

Very helpful. Clearly identifies all fasteners.

@stevedepoian2125 Год назад

When I was replacing the air filter it didn’t fit into the hole in the back, I tried trimming it and it still wouldn’t go in

@cjtheusful Год назад

Awesome 👌 👏

@gilbertohernandez9669 2 года назад

How I erase the maintenance signs? I didn’t find it for an 450

@TrailPass 2 года назад

From the Outlander forum: 1 - Turn ignition ON but don't start the quad. 2 - You HAVE to be on the ODOMETER (total quad mileage) display. 3 - Put HIGH BEAMS ON. (You must start the procedure from HI BEAMS) 3 - Press and HOLD the SET button. 4 - Toggle HI - LOW three times WITHIN 2 SECONDS. 5 - Release SET button. 6 - Turn ignition OFF and wait until the dash goes dark. 7 - Turn ignition back ON, VOILA! MESSAGE GONE

@gilbertohernandez9669 Год назад

Thanks 🙏

@mrjoe8660 Год назад

I didn't have to remove any plastic I use a smaller socket set to get the filter off

@TrailPass Год назад

What size machine?

@Tom-ej8bb Год назад

Check it closer.. Yes the manual says to remove floor board. Once removing panels you will see with little effort you can get the filter off and the floor board doesn't have to be removed. The floor board is an absolute pain! Each end has a torx screw and wedges into the floor board so don't break plastic in frustration. TY