Can-Am Ryker 3-Piece Touring Luggage with LED Lighting

Подписаться 33 тыс.

Просмотров 208 тыс.

50% 1

The Can-Am Ryker 3-Piece Touring Luggage system is available at SlingMods.com here: www.slingmods.com/canam-ryker...
Introducing our 3-Piece Touring Luggage System for the Can-am Ryker & Ryker Rally. This is our favorite mod to date for the Can-Am Ryker as it brings the Ryker one step closer to it's Spyder brethren in terms of touring functionality at just a fraction of the price. This three Piece luggage system includes all necessary hardware to mount 2 lockable, quick release saddlebags to each side of the Ryker, as well as a removable locking top trunk case. The excitement doesn't stop there as we've also loaded these bags up with DRL (Daytime Running Lights), Brake Lights & Turn Signal Functionality drastically increasing your likeliness of being seen while out on the open road. Best of all, they've been designed to run in conjunction with the passenger seat so you don't tour alone if you don't want to.

Авто/Мото

Опубликовано:

30 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 289

@Slingmods 2 года назад

🛒Can-Am Ryker 3-Piece Luggage System is available here: www.slingmods.com/canam-ryker-touring-saddlebags-rear-trunk-top-case-luggage-system

@SoundMindADV 2 года назад

Just purchased this set. I need a wire D replacement. One of the connectors is bad and my left saddlebag lights don’t work. How do I contact you for this?

@Slingmods 2 года назад

@@SoundMindADV Hello, our customer support team can assist with that. You can contact them here: www.slingmods.com/index.php?route=information/contact

@iluvbiggirlz420 4 года назад

By far the best Ryker Mod ever!

@marcocastillo368 4 года назад

Yer making me want a Ryker even more now. Sweet mods!!

@wasp2151 4 года назад

This is a must buy for me once I get my ryker.

@JosephCMiller 4 года назад

Doggone, this luggage makes the ryker so desirable.

@PhoenixOutdoor 2 года назад

Bought this set used. Guy I bought it from said 4hr installation. Your video made simple work out of overcomplicated written directions. Install time, less than two hours and that is partially because I wanted the wires run a certain way that would make it easy to take the bags on and off as I travel a lot and would like to use them as luggage. Thanks for the excellent video!

@Slingmods 2 года назад

Awesome Preston! Really glad to hear that. Thank you for sharing.

@singlesparq 2 года назад

My previous spider had this set up, nice to see I can get it on my Ryker.

@JH-qy7zw 2 года назад

This guy finishes every sentence like a flight attendant.

@Slingmods 2 года назад

You say that like that's a bad thing. Lol.

@RonConsumer 4 года назад

This is what I've been waiting for, now I'll get a Ryker thanks, Brandon... 👍

@Slingmods 4 года назад

Awesome Ron.. Glad to hear it!

@michael-eg2ps 2 месяца назад

I bought this for my Ryker. was pretty easy to install and love them. lots of storage now!

@Slingmods 2 месяца назад

Right on

@xrpirate536 4 года назад

Because of you guys I am going to have to break down and buy a Ryker Rally. I really wasn't going to get one as they are to bare bones. But with all these mods... I gotta have one!

@Slingmods 4 года назад

That's awesome James! We tend to have that effect on people. Lol. We have a lot more cool stuff coming for this bike as well. Thx for watching.

@pognarchy 4 года назад

This makes it look really cool even if I don’t have any use for the other two holders 😂

@davidhanesworth8027 4 года назад

Exactly what it needed.

@brykeriding685 4 года назад

This is what I need cause a driver hit me from behind at a stop light at night and my wife took most of the force of the hit luckily it was the high back rest but I believe needs more back light to be seen at night. When I get my bike back I'm going to get this when you guys get more in stock they look alot safer for passengers as well.

@williamperez5537 4 года назад

That is dope! Every 5 things I buy from you ima need a discount! LOl

@MBFITNESS33 4 года назад

Awesome!!! A MUST HAVE!!! ^5 Slingmods

@slyguyaction 4 года назад

And we went ahead and mounted a large Shad expandable top case to the Max-Mount on our Ryker and a Shad removable side case a few months ago thinking we solved the storage issue. Ugh

@javierortiz388 3 года назад

That is so awesome I need one of these

@waddju606 2 года назад

The video doesn't make clear where the wire you ran up the swing arm to the front of the bike goes. What is it getting plugged into?

@jonespcnrepair 4 года назад

Very cool, need something like this for the F3 Base

@Slingmods 4 года назад

Hello Chris, in the works! We'll have this exact setup for the F3 / F3s here shortly. Stay tuned...

@taylors4243 3 года назад

This will be my 1st upgrade

@alrighteeyore6764 4 года назад

Yasssss!!! That is one cool kit! Even matches up to the styling very nicely! Been a long wait! Wondering how many pizzas will fit in that top bag? Lol

@Slingmods 4 года назад

Lol.. quite a few!

@brunolefou 3 года назад

Thanks that's was easy!!!

@lemiepassionichannel4352 3 года назад

This is so cool

@SirDragonX Год назад

Look so Awesome.

@lindabentley7624 4 года назад

Awesome!

@rubo1964 4 года назад

wow very impressed.

@rickgarcia8481 4 года назад

Now, that is very nice... Now I may Rethink about buying the ryker... It really transforms the bike... Makes it look like a big bike not a toy.

@Slingmods 4 года назад

Agree Rick! Thx for posting.

@CeeDeeLight 3 года назад

I have them and love them. Only one thing to be aware of-if you ride two-up the support bar(approx 1" square shape) that is under the top case will bottom out and hit the fender of 900 Ryker. I have to look at getting an Elka to keep it from bottoming out. I have a video about it. :-)

@Slingmods 3 года назад

Hello CeeDee, we actually partnered up with Elka this week because we also feel that the rear shock on the Ryker is too soft.. especially when traveling with a passenger. We'll be doing a comprehensive video on the difference with and without aftermarket rear suspension. Stay tuned...

@jsnell5211 4 года назад

How often is the can am spyder required for oil change , every how many miles ??????

@OpeoAslam 2 года назад

Is this compatible with the under seat LED lights y’all sell? I installed those and would want to keep using them.

@aaroncordoba3491 4 года назад

Hola amigo q presio tienen las maletas para la moto esa quiero unas así

@boyce1381 Месяц назад

These seem really awesome. The only thing is that while it's nice to have the locks on the compartments, they do not lock to the bike. With a push of that button, anyone can come take it & open it later at home.

@Slingmods Месяц назад

Hello, when the bags are "locked" the quick release button will not work, so that your luggage can't be stolen. The bags must be unlocked with the key to use the "quick release feature".

@aimee19800 4 года назад

I wish I could get only one piece.. The top piece

@Slingmods 4 года назад

That may be offered down the road.. but for now it will only be offered as the 3-Piece kit. Thanks for the feedback.

@PolecatReturns 4 года назад

I second this, been waiting for a one piece top kit that is lockable that works with the max mount. This fits the bill but don't need the extra saddle bags.

@guapomob14 4 года назад

Me too just the top not the side bags

@wandamorales7145 2 года назад

the cables doesn't come like it's shone in the video . but not hard to figure out

@Meh_its_funny 4 года назад

Will the saddle bags fit/work with the LinQ Cooler / Thermal Box? I like the Idea of the extra saddle bag, but prefer the cooler since I carry waters and lunch for long rides.

@Slingmods 4 года назад

Hello, this item is not compatible with the LinQ accessories.

@guapomob14 4 года назад

I bought but 6 things from them I Want is the top case don't want the side cases

@curonthompson3401 4 года назад

That looks like the the Ryker 900 Rally Edition, I just bought a Ryker 600 without the rear seat, will these work on that as well?

@Slingmods 4 года назад

Hello Curon, Yes it will but you'll need to add the BRP Max Mount to your bike first. Thank you!

@leedunlap6368 4 года назад

Will the flashing brake light mod you offer make all the bag lights blink as well?

@Slingmods 4 года назад

Yes sir it will! It actually looks pretty crazy with the flasher kit installed.

@duran73 4 года назад

Can you provide me info on the blackout windshield please. Thanks in advance

@Slingmods 4 года назад

Hello Duran, our MadStad Adjustable Ryker Shield is available here and has several different tint levels and heights to choose from... check it out: www.slingmods.com/canam-ryker-adjustable-windshield-madstad

@Chinonso4K Год назад

Can you adjust the suspension so you don't have to worry about bottoming out with a passenger or do you need to get new suspension? I know I can adjust the stock suspension with a tool.

@Slingmods Год назад

The Rally Models have adjustable suspension. For the Non-Rally models we two products to address that issue here: www.slingmods.com/canam-ryker-lift-kits

@michaeldrevyankosr6180 3 года назад

Where do you hook the front of the wiring harness to ? , you did not show that ?what was time to complete this project?

@Slingmods 3 года назад

Hello Michael, we don't currently have this product installed for me to reference unfortunately.. but it is a popular question. I'll have to reach out to the video team on that one to see if we have some footage of that part of the installation. In regards to installation time, i'd say from 1-2 hours.. depending on how clean you want your wiring runs to be. 😁

@zibizacharko4819 4 года назад

Super ...

@midliferyker3929 4 года назад

In anticipation of my set arriving, I keep watching this over and over. I think I have a problem. One question. You are shown running a wire along the swing arm, but don't show where to zip tie it. Can you elaborate?

@Slingmods 4 года назад

Hello Midlife.. that's funny. In regards to the harness, you'll run the new wire harness down the swing arm & frame with the existing harness to the pivot point of the swing arm. There's a harness already there, so I zip tied them together. Just make sure you leave a little slack in the harness to allow for the articulation of the swingarm's suspension travel.

@midliferyker3929 4 года назад

@@Slingmods Gotcha. Thank you!

@danmorris2860 4 года назад

@@Slingmods for the harness you run up front where and how does it plug in up front?

@petergriffin8681 3 года назад

@@danmorris2860 it doesn’t plug into anything up front, it just runs along the swing arm, then back towards the fender you removed and to the mounts for bags.

@mlb37031 3 года назад

At the 4:30 minute mark you ran the wiring harness toward the front of the Ryker but you did not show what it connected to. Could you explain where it connects to please? Thanks

@fafulin5954 3 года назад

Did you ever get a response to this? I just noticed it as well

@ibbebe10 Год назад

This is the answer I need!!!😤

@slyguyaction 4 года назад

What if we’ve already installed the Max-Mount, saddlebag mount and have a Shad saddlebag installed. Is our saddlebag mount and saddlebag compatible? Would we have to ditch the bag and saddlebag mount to install the mount(s) in this kit and use these bags?

@Slingmods 4 года назад

Hello Ryan, this system is intended for Ryker owners without a current luggage solution and would not be compatible with the Shad saddlebag setup.

@slyguyaction 4 года назад

Slingmods.com, Thanks for the quick reply! 😎

@wallymurray620 3 года назад

Can the top case be mounted ahead if your never going carry a passenger? That way we can use the backrest for the driver.

@Slingmods 3 года назад

Hello Wally, no it cannot. You'd need a driver backrest as a separate mod. We have this one here that is compatible with the luggage system: www.slingmods.com/canam-ryker-driver-backrest-spyderextras

@wallymurray620 3 года назад

Fair enough, but I hope you folks will consider making a mount that could do this. I think a whole lot of Ryker riders never carry a passenger and moving the top case ahead will still look good, probably handle better too. Or maybe offer a mount that we could clip a Shad or Givi top case on where the passenger seat is would be nice. Thanks.

@mystytymes Год назад

I have the ryker lighted plate, the center led about license plate, and the side leds. Will this work with all those

@Slingmods Год назад

Yes, they'll all work together.

@jimcummings1537 Год назад

I have seen this Top Case Videos in the 3 piece luggage set that shows it comes with a liner. Do They all come with one or have You discontinued them? Buddy just received his with NO Liner.

@Slingmods Год назад

Hello Jim, if you could please have your buddy contact our customer service team we're happy to resolve any issues. They're available here: www.slingmods.com/index.php?route=information/contact

@flyingmonkeymediatelevisio9207 3 года назад

Where do you hook the front of the wiring harness to? It never explains that in the video.

@Slingmods 3 года назад

The harness zip ties to the factory harness down the swing arm. Make sure you're wiring is free and clear from any moving suspension components.

@martinhensley8785 Год назад

Can someone tell me what size the mounting bolts to the max mount are I bought this setup used and unfortunately the bolts were not included.

@Slingmods 11 месяцев назад

Hello Martin, if you have not done so already please contact our Customer Service Team at your convenience so they may assist you. Here's the link for that: www.slingmods.com/index.php?route=information/contact

@denvercarver2379 4 года назад

How do these cases secure to the bike, via clip and quick release with, or without a lock to keep them from being stolen

@Slingmods 4 года назад

Hello Denver, when the bags are "locked" the quick release button will not work, so that your luggage can't be stolen. The bags must be unlocked with the key to use the "quick release feature".

@denvercarver2379 4 года назад

Perfect, as I thought!

@laurettaboston1707 2 года назад

It looks like the top case and saddlebags just pop off and on . What to anyone from just popping of and stealing them. Can they be locked down in any way?

@Slingmods 2 года назад

Hello Lauretta, yes. When the bags are locked with the key the quick release button will not work to remove the bags.

@rayjlove6264 2 года назад

Will 3-piece touring luggage with LED lighting work or fit on custom aftermarket seats

@Slingmods 2 года назад

Yes, here's a picture of it with our Ultimate Seat: www.slingmods.com/image/catalog/ultimate-seats/ryker/canam-ryker-ultimate-seats-installed-with-3-piece-luggage-system.jpg

@robertkelleher5936 6 месяцев назад

we can hear you and see all the words that you're saying we just really can't see the luggage bags or quality so not sure about purchasing

@felixthecatinthehat. 3 года назад

Hi, Can i confirm that the turn signals on this luggage system blink amber/orange?

@Slingmods 3 года назад

Hello Shane, the turn signals are shown here: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-t7cYJrVZya8.html They are indeed amber/orange in illumination color.

@bellatorable 2 года назад

Hey compre el set de tres guanteras y se rompió el arnés del cable de la luz guantera lado derecho como se llama y como podría yo hacer para que me manden uno si me pudieran be ayudar no estoy diciendo que venia defectuosa fue mi culpa al instalarla gracias.

@Slingmods 2 года назад

Claro, estaremos encantados de ayudarte con esto. Si pudiera, envíe un ticket a nuestro equipo de soporte con imágenes y su solicitud, podemos ayudarlo a encontrar una solución. Aquí está el enlace para enviar el ticket: www.slingmods.com/index.php?route=information/contact ¡Gracias!

@scottthornbrugh4482 2 года назад

I do not want to add a passenger seat. Does the trunk mount further forward if i choose so?

@Slingmods 2 года назад

Hello Scott, this system was purpose built for use with a passenger. You'd don't have to use the top case as a backrest for your passenger if you don't want to.. but it cannot slide forward over the passenger seat if that's what you're thinkin'.

@dabo1971 4 года назад

Is this only for the Rally version? I’m asking because you can’t adjust the rear suspension without buying the 2-up adjustment

@Slingmods 4 года назад

Hello Dabo, this will also work on the non-rally Ryker as long as you have the BRP Max Mount installed.

@dabo1971 4 года назад

@@Slingmods I do. I just was wondering about adjusting the rear suspension

@Slingmods 4 года назад

@@dabo1971 Hello Dabo... I can't say with certainty that your rear shock will need to be adjusted at all.. as it depends on overall combined driver and passenger weight. It may be best to contact your BRP dealer with that inquiry to see if that's necessary, as they'll have more information on that topic.

@dabo1971 4 года назад

Slingmods.com ok thank you

@andiwoods9696 4 года назад

Since I ride single can the top box replace passenger seat on the max mount?

@Slingmods 4 года назад

Hello Andi, unfortunately not... as this setup is only for use "with" the max mount in place.

@beprcmenorca6208 Год назад

Hello, I have a Ryker 900. How much would the whole set cost me, suitcases, supports and bring it to Spain? if you are so kind to inform me, thank you

@Slingmods Год назад

Hello, the best way to do that is to add the item to your shopping cart and enter in your Shipping Address to get an accurate International Freight Quote. Here's the link to the product: www.slingmods.com/canam-ryker-touring-saddlebags-rear-trunk-top-case-luggage-system Thank you!

@beprcmenorca6208 Год назад

Hi, I'm subscribed to your channel. I'd like to ask you a question, what does the entire kit of suitcases and supports for the Ryker cost, and take it to Spain?

@Slingmods Год назад

Hello, thank you for being a channel subscriber. Here's the link to the luggage kit: www.slingmods.com/canam-ryker-touring-saddlebags-rear-trunk-top-case-luggage-system If you add it to cart and enter in your shipping address, the shopping cart software will calculate your international shipping costs. Thank you!

@abdulsantiago4710 3 года назад

Can I install this and use the upgraded comfort seat for passenger/driver?

@Slingmods 3 года назад

Hello Abdul, we have not personally tried that pairing.. but I don't see a problem with that.

@JVfam_ 4 года назад

Is this compatible with the passenger vertical foldable back rest too?

@Slingmods 4 года назад

Hello Jose, we have not tried the factory vertical back support from BRP with this setup. How far past the back of the passenger seat cushion does it extend?

@don8jarquin60 Год назад

Excuse me, where can I buy a rear mud guard that covers the entire rear wheel on my 2022 Riker thanks!!!

@Slingmods Год назад

Hello, check these out: www.slingmods.com/canam-ryker-rear-mud-flap-rock-guard-rally-armor

@PhantomFox1 4 года назад

Yeah this looks pretty sweet. I assume to take a bag with you, you also have to undo the wires everytime? That's kind of a downer.. still pretty cool though

@Slingmods 4 года назад

Yes.. you would. There is one quick release wiring clip per saddlebag and two quick release wiring clips for the top case. We weren't originally gonna have LED illumination for that reason.. but we felt that the safety factor of Running, Brake & Turn Signal integration outweighed the inconvenience of having to unplug the wiring for bag removal.

@iluvbiggirlz420 4 года назад

@@Slingmods well i thinks its the best mod, and I don't even have a Ryker yet.

@PhantomFox1 4 года назад

@@Slingmods I completely agree with you and that the safety factor far outweighs the annoyance of removing wires. I wonder if on a future iteration something could be engineered so the when the bag is put in place it makes contact automatically. I'm no engineer but seems possible. I do love this kit! I know you will sell tons of them. Love the videos and all the cool Ryker stuff you guys have!

@Slingmods 4 года назад

@@PhantomFox1 That would be amazing Jason! Thx for the feedback man.

@molinaridiego 4 года назад

You can get liners for the cases and take those instead of the entire case.

@user-sq8hl4kx8c 4 года назад

This is really good! I want it. How much does it cost to install this in Japan?

@Slingmods 4 года назад

Hello, if you could email us at support@slingmods.com with your exact shipping address we'd be happy to get you an international shipping quote. thank you!

@subjug8767 4 года назад

Does the lock prevent the cases from being removed? Locking them doesn’t do any good if someone can walk up and just remove them.

@Slingmods 4 года назад

Yes.. when the cases are locked.. the quick release buttons will not work.

@subjug8767 4 года назад

Slingmods.com thanks.

@paulcurrie7828 4 года назад

Are the glossy panels on the side bags removable for painting?

@Slingmods 4 года назад

Hello Paul, yes they are. There is 6 screws holding on the glossy plastic panel on each saddlebag. You can remove those to paint. Great question!

@nickanderson3675 Год назад

I just instald them on my RYKER 900 THE LEFT SIDE BAG WONT BLINK I SWITCH THE WIRES AROUND TO MAKE SURE IT WAS RIGHT BUT STILL NO BLINKING

@Slingmods Год назад

Hello Nick, our Customer Service Team is standing by for assistance. You can create a ticket here: www.slingmods.com/index.php?route=information/contact or contact us at 800-211-1396 Mon-Fri 9am-5pm PST!

@gerrywood5325 3 года назад

Can you add the 3 piece Touring Luggage system with the new Ultimate Seat? With the exception of the passenger back rest.

@Slingmods 3 года назад

Yes you can. Here's a pic of both running together: www.slingmods.com/image/catalog/ultimate-seats/ryker/canam-ryker-ultimate-seats-installed-with-3-piece-luggage-system-2.jpg

@michaeldrevyankosr6180 3 года назад

What does a complete ryker like you have in your video with luggage cost ?

@Slingmods 3 года назад

Hello Michael, this kit is $699. You can get more information about this product here: www.slingmods.com/canam-ryker-touring-saddlebags-rear-trunk-top-case-luggage-system Thank you!

@israelacevedosoto8549 3 года назад

Where Can I found this Rack and baggege accesorios to Can-Am Ryker? Is special to this model or is a universal rack? I’am in Mexico city. Regards

@Slingmods 3 года назад

Hello Israel, this item is available here and is made specifically for the Ryker application: www.slingmods.com/canam-ryker-touring-saddlebags-rear-trunk-top-case-luggage-system Please reach out to our customer service team at the link below and we can get you a shipping quote to Mexico. www.slingmods.com/index.php?route=information/contact

@vcdrny 3 года назад

So they are lockable. But also come off pretty easy. So what's there to stop someone from just disconnecting the entire thing and walking away with it?

@Slingmods 3 года назад

When you lock the bag with the key, it also locks to the luggage bag to the rack itself.

@vcdrny 3 года назад

@@Slingmods good to know. Since that wasn't stated in the video. Thanks for the info.

@adv-viennaj.p.2571 2 года назад

Hi is it possible with the shad sh36 and Topcase sh58 x cases ? The System is nice but the Cases looks not so cool

@Slingmods 2 года назад

Not for this 3-piece kit.. but we actually just completed our Shad bag prototype. It will only be a top case though and utilize the SH47 case along with a custom rack to mount to the Ryker, as well as a passenger backrest pad and removable storage bag liner. Thanks!

@jimmycook7926 3 года назад

Is the luggage package compatible with the two brothers exhaust system?

@Slingmods 3 года назад

Hello Jimmy, yes it is.

@batsinthesky 2 года назад

My wires have been cut :-( . Do you sell wiring kits or do I have to buy another set?

@Slingmods 2 года назад

Hello Dark Knight, sure we can help you with that. Please submit a support ticket to our customer service team here with your request and we're happy to get you taken care of: www.slingmods.com/index.php?route=information/contact

@Crystal-ot6wb 3 года назад

What cover would you suggest using for the Ryker with the 3 piece luggage set?

@Slingmods 3 года назад

If you have a Ryker with the 3-Piece Luggage Set, I would recommend this cover here: www.slingmods.com/can-am-spyder-f3t-f3-limited-full-cover-ultragard

@Crystal-ot6wb 3 года назад

Ordered. Thank you

@Slingmods 3 года назад

@@Crystal-ot6wb Awesome. I'd love to hear your feedback on that cover once you get it on your bike. Thanks again.

@JohnBraman413 4 года назад

how much extra weight does this setup add to the ryker?

@Slingmods 4 года назад

Hey John, I don't have exact product weight because everything comes boxed up and ready to ship.. but around 40 lbs.

@mikehernandez8043 4 года назад

How mutch is it

@JT_Sim_Racer 4 года назад

do you have a picture of it without the bags and just the racks, wondering how it looks when i don't want all the luggage on the bike.

@Slingmods 4 года назад

Hey Rider, good suggestion. I'll put in a request to the media team to get some pics up on the site with all bags removed! Thanks!

@StarCitizenZero 4 года назад

If you stop the video at 7:28, that will give you a decent look at the bike without bags

@Slingmods 4 года назад

Hello Rider, we've added a few pictures to the product page so that you can see what the racks look like when the bags are off the bike: www.slingmods.com/canam-ryker-touring-saddlebags-rear-trunk-top-case-luggage-system Thanks!

@JT_Sim_Racer 4 года назад

Thank you for the quick update. Another suggestion, you should make the racks that attach a separate item for sale or something similar, so we could put other saddle bags on. I love this set up but all can am has is that silly one sided saddle bag rack. Money to be made here. You have got great mods keep it up. Thank you.

@bigjrock05 Год назад

So I'm assuming when you remove the bag you have to disconnect the cable

@Slingmods Год назад

Yes, that's correct.

@flirson 3 года назад

Can you tell me please, where did you buy this luggage thing? I really need it for my Ryker Rally Edition (:

@Slingmods 3 года назад

This is available here: www.slingmods.com/canam-ryker-touring-saddlebags-rear-trunk-top-case-luggage-system Thx for watching!

@flirson 3 года назад

Thank you 🙏 Love your videos

@rlegerwood 5 месяцев назад

Do you have a passenger armrest solution that would match this setup?

@Slingmods 5 месяцев назад

Yes, we do have one coming out shortly. It's not yet released though.

@diesel_8tor804 4 года назад

Will you guys be offering a cover for the ryker that will fit with the luggage?

@Slingmods 4 года назад

I think one of our covers for the F3L will work since it has the luggage from the factory. We can test that next week.

@diesel_8tor804 4 года назад

@@Slingmods Thanks! Will you let me know how it works?. I'll order one if it works.

@denvercarver2379 4 года назад

Is the wiring harness able to be sold separately?

@Slingmods 4 года назад

Hello Denver, no it is not. The product is only sold as a complete kit. Thank you!

@RichardJoashTan 4 года назад

Does this work with the Japan market Ryker?

@Slingmods 4 года назад

Hello Richard, that's a great question. I only have access to U.S. bikes.. so I would not be able to confirm that for you. My apologies.

@wjd3325 3 года назад

Is 3-Piece Touring Lugage and Ultra Guard Covers Available?

@Slingmods 3 года назад

Most people run this cover for the Ryker with the 3-piece luggage kit: www.slingmods.com/can-am-spyder-f3t-f3-limited-full-cover-ultragard

@scott-lc8xc 4 года назад

What is the max weight load for each case?

@Slingmods 4 года назад

Hello Scott, max recommended weight per the mfg is 10lbs per bag. Thanks!

@intrinsicfactor5425 3 года назад

I just ordered my 2021 Ryker Rally. Do you ship to Canada ?

@Slingmods 3 года назад

Hello, Congrats! Yes we do.. but you'll need to contact our service team for shipping quotes. Thanks for watching.

@user-lp7gz3gf2n 3 года назад

after pull the rear mud flap out, there is a gap between sits. road debris will splash over your back. how to fix it!

@Slingmods 3 года назад

If you select the Rally model option when purchasing we now include a water splash guard with the kit.

@user-lp7gz3gf2n 3 года назад

@@Slingmods i did broght them aready, they r not come with it, and they damaged by shipping (Fedex).

@Slingmods 3 года назад

@@user-lp7gz3gf2n Hello, we're happy to assist you on this. Can you please send us a support ticket here: www.slingmods.com/index.php?route=information/contact&vehicle=1 so my customer service team can assist in these matters. Please included your order information on the inquiry. Thank you!

@jsnell5211 4 года назад

I'm looking for the same video for the f3 spyder ,

@Slingmods 4 года назад

Hello James, it's almost complete sir. About 2 weeks out on that one. Thank you sir.

@midliferyker3929 4 года назад

Is it April yet? Can't wait to get my set!

@Slingmods 4 года назад

Lol. Hello Midlife.. we we're gonna surprise everyone with an early ETA.. but since you asked... we started shipping today 🙂.. We're shooting for all pre-orders to be sent out by March 16th! Thanks!

@midliferyker3929 4 года назад

Slingmods.com WHAT???!!!! You just made my year!!!!!!! What fantastic news!!!!!! Much love!!!!!

@bobbowditch5064 Год назад

Can you supply just the top luggage box with lights in ?

@Slingmods Год назад

Not for this one.. but we do have the Shad Rear Trunk Kit here: www.slingmods.com/canam-ryker-top-case-luggage-system-shad We don't have lights yet for the Shad kit.. but it's something we're looking at as an "add on" for next season. Thanks!

@luisnazario7384 2 года назад

can these bags be installed on the 2022 ryker rally

@Slingmods 2 года назад

Yes, they can.

@thomashilferty3481 3 года назад

Can you use both the 3 piece luggage and the ultimate seat at the same time?

@Slingmods 3 года назад

Yes, we have several customers running both. Here is a pic of both installed: www.slingmods.com/image/catalog/ultimate-seats/ryker/canam-ryker-ultimate-seats-installed-with-3-piece-luggage-system-2.jpg I would recommend you upgrade to one of our aftermarket Elka rear shocks if you plan on doing that though. The factory rear shock is too soft to handle the weight of a passenger and the 3-piece luggage.

@thomashilferty3481 3 года назад

That is very cool with both the 3 piece system and the ultra seat. But I cannot tell where the rider pegs are located for the 2up rider, can you point them out for me thanks

@Slingmods 3 года назад

@@thomashilferty3481 Hello Thomas, the luggage kit is designed to work with the factory BRP passenger foot pegs. We're also working on a set of aftermarket passenger foot pegs that will be compatible as well. Thank you!

@peter58murray 4 года назад

Does this fit the Europe models that have the different rear lights?

@Slingmods 4 года назад

Hello Peter, that's a great question sir. I unfortunately don't have access to a European model to test this for you. My apologies.

@peter58murray 4 года назад

Slingmods.com only difference is it has extra rear indicator lights and not the USA style where the brake and indicator are integrated....i was wondering if the wiring loom would be the same that’s all cheers

@janesinclair1796 4 года назад

Does anyone know how much shipping would be to the uk

@Slingmods 4 года назад

Hello Jane, once our first shipment arrives and we have exact weight and dimensions of the kit we'll be able to provide you with an accurate freight quote to the UK. Thanks for your interest.

@SilverRanger78 10 месяцев назад

I wonder if this will help w my doordash delivery

@Slingmods 10 месяцев назад

haha. Yes it would indeed.

@JohnBraman413 4 года назад

what brand are the bags so i can look for liners?

@Slingmods 4 года назад

Hey John, we'll be looking into liners for these bags in the upcoming weeks. I think some of our existing F3 / RT liners will work out great and they're quite inexpensive. Thanks!

@JohnBraman413 Год назад

@@Slingmods any news on the liners?