Thank you for making a complete video! Every other video I saw today starts with the panels off, assuming we all know which ones to take off and how to do it.
Thanks for letting people know that their is a neutral. I found out accidentally. The dealership don't tell Ryker owners that there is a neutral gear or lack there of.
take your Jackie handle off put a towel around it put it in a vice and flex it outward a little bit so you will have more ease of passing by speaker and then also switch out to jockey handle knob to A cylindrical type knob and you have more room and you'll be able to tighten it up all the way
Yah totally agree. U can put some heat in it too. To make it bend even easier... also I think if u do a double bend. Bend it right next to the plastic and then it straight back up maybe 6 ins above the first bend. If u throw it in a vice. Make sure to put a towel around the bar so u don't put any nasty marks in it
I'm not sure how long the jockey stick is from it's mounting point on the bottom. Buy a piece of clear vinyl tubing just a little bit bigger in diameter than the jockey stick, about 3 ft to make sure you have enough. Slide the tubing over the jockey stick so that it's about 2 to 3 inches above the side panel. Take another piece and slice it down the middle and slide it over the edge of your panel, you may have to glue it on to make it stay in place. The piece of vinyl tubing on the jockey stick will rub against the piece vinyl on the side panel. I don't have a Ryker but I will be buying a Spyder in November.
Try taking it to a machine shop or welding shop and get the bar with the ball on it slightly bent so it clear both speaker and fender. Your looking at an inch or so bend. Just an idea.
It would be so much easier if the Ryker came with a reverse push button like the Spyder, for the amount of money you pay for a Ryker that’s the least they can do, just sayin. Ty for the video it’s very helpful 👍
find a custom metal shop to make some extra bends to make it work you might need to repaint it. Or they can replace something that would be more ergonomic. I am not familiar with this machine and don't know how it operates. but i would make something custom for control arm. and use the other components to install per spec. Nice Machine Sir, sick color way.
I think it looks way better with the jockey handle than stock. I need one! Also like some others mentioned, put alittle bend in the shaft to clear the speaker and possibly a different handled, not the round ball. Should be good to go bro
Take the whole bike to a tool maker. like a welding shop .ask if you can have the same system made using steel rod, That can be custom bent for your need, Good luck. sweet bike.
Good video dude , your bike is nice man. Hey you can take off the rod and take it to a machine shop and have them make you a new one with the bend extended longer to clear the speaker. shouldn't cost too much . GD luck.
You should get a dremel drill and bit and shave it down and then get 600 grit and paper to sand it down super smooth on the inside of the cover and you will maintain your paint and have the clearance for it to be out more how you like and tighten it up.
I was wondering how long it would be before you posted a video on this mod. I was on the fence about ordering one, but when I compared the one on Slingmods for $200 verse this for $150, well that pretty much made up my mind. Just ordered the T-Rex. Thanks.
@@ByronArnoldATL press down and back. I say down and back like you’re scraping mud off your shoe. And of course you just push it forward to go forward. Easy peasy.
I thought about getting a Ryker when they first came out. I am 6'2 and not sure how comfortable I would be on one. Do you think that is too tall for one? I also like in Atl and I have yet to see any that are custom like yours. They are so nice and got me back to wanting one.
I haven't heard thay exhaust in person so I can't speak on how it sounds but here is a link to the exhaust I have and you can also receive a discount if you use my code which BYRONARNOLD www.silberturbos.com/products/can-am-ryker-muffler
Aye brody.. How tall are you? You about my size I think im 5'10 . I just wanna know cuz im looking to buy a can am but im thinking the ryker look too small.. help me out broly 🤷🏽♂️
I love the paint job, the jockey is shifter is OK, but I put an extension on the lever to pull it back and my foot to push forward at 5'3" i didn't really find it much of an issue. I read about neutral in the owners manual.