Can-Am Spyder F3 Night Rider LED Light Strip w/Remote 

Awesome D Rex.. welcome aboard my friend.

haha. It's a cool mod for sure Munkee! You'll enjoy it. Thanks for the comment!

Hello Caleb, if you could reach out to our customer service team www.slingmods.com/index.php?route=information/contact with pictures of your wiring setup we'll be glad to get you up and running with this.

Hello Deberry, the F3 has a 12v accessory wire that you can use for the Neutrino ignition 12v trigger wire under the left access panel.

Hello vetteman892000 - We do! You can find that here: www.slingmods.com/polaris-slingshot-night-rider-led-light

Slingmods.com Thanks!! I will be ordering soon! When do you expect to have them back in-stock ?

Hello Susie, the rubber switch is an emergency cut off switch in case you lose your remote control. The black box aftermarket fuse block or our FZ-1 fuse block (both sold separately) both use 3 wires to connect. One is 12v+ which goes to the + battery terminal. One is Ground which either goes to your negative battery terminal or chassis for ground and one is an "accessory" 12v signal wire that tells your fuse block when the ignition turns on. That 12v accessory wire on the fuse block should be connected to the accessory 12v wire that is located underneath the left side service panel on the F3 models labeled "customer accessory circuit". Please note that the Black Box is not required for this installation though. You can wire the ring terminals on the Night Rider light directly to your battery terminals and use the remote to turn on/off and cycle through the color options. Thanks!

Wow strange.. i wonder if the remote got RF interference from another device nearby and turned on the lights.

Hello Curtis, so any of our TricLED lighting mods will connect to your factory wiring with the plugs that are included with the mod or to our 1:2 Front Fender Power Harness, depending on which mod it is. The Universal 12V Block is perfect to power anything that you want to run on either Full-Time 12V or Accessory Ignition 12V so that you don't have a bunch of wiring running to your battery.

@@Slingmods Thanks. I noticed that the sequential turn lights and night rider light have connections that work with the harness. The mirror turn light does not, as it has wires and some connectors. Is there a way to connect them to the harness for power, or will I need to use something else?

@@SPYD3RRID3R Hey Curtis, okay so I pulled up your order history. - The TricLED Front Fender Reflectors with Sequential LED Turn Signals & Running Lights for the Can-Am Spyder F3 & RT (2019+) you purchased plugs into the factory wiring on the front two fenders and does not require an aftermarket fuse block - The Show Chrome Amber LED Side View Mirror Running Lights & Turn Signals for the Can-Am Spyder RT (Set of 2) (2020+) can be run off the Plug N Play Fuse Block we sell from Show Chrome, or you can tap the appropriate wires with the included wire taps. - The Night Rider light can be connected directly to the battery and turned on/off with the remote. If you want it to turn on/off with the ignition, you can also connect this mod to the Show Chrome Fuse Block we sell and connect it to one of the "ignition" only circuits. - The 1:2 Fender Power Harness you purchased can be used for other TricLED lighting mods such as our Front and Rear Facing A-Arm Lights, but I don't see those on your order history. Those would literally be Peel & Stick and Plug & Play once the 1:2 Fender Power Harness you purchased is installed. Hope this helps!

Hello Larry, the "black box" is not included with the product. The "black box" is an accessory fuse block we sell that gives you an easy power hookup to all your aftermarket accessories. If you don't have that you'll need to hook the light strip to another 12v power source on the bike.

@@Slingmods ahh perfect I would've opened that up and be completely confused! I'm gonna have to figure out where the 12v fuse block is located. I don't have my bike currently it's being shipped from florida

@@larrywright2088ify Hey Larry, congrats on the new ride. There are ring terminals included with the product to connect the light to both the + and - battery terminals. Just make sure you remember to turn off your night rider lights with the included remote control when you're parked, so you don't drain the battery. For future reference on other low current 12v mods, there is an available 12v "ignition" powered accessory plug underneath the left upper service panel on your Spyder F3. That can be used to power things like our 12V docking station, etc.

@@Slingmods thank you! I'm no where near a mechanic so letting me know these things to have a smooth install is key! I'm going to be as careful as a nervous brain surgeon when adding these mods. If there is anything else I NEED to know please let me/ us know! Hahaha thanks again slingmods

@@larrywright2088ify haha sounds good man. This one is straight forward. If you have any questions just ask. Thanks!

Sadly not at this time.

As long as you have a long enough surface area to adhere to, it could really be used on anything.

There is no app for use with this item. If you'd like to contact our support department, we can assist you with a new remote control: www.slingmods.com/index.php?route=information/contact

Hello Tracy, yes it can. The F3 has an unused 12V accessory plug underneath the top service panel. You could pull power from that as well.

@@Slingmods is there an adapter to make this work from the loose wires to the 12V plug that you speak of?

Slingmods.com Can’t find this 12V plug. It would be more helpful to show where it is on the clip.

No, we don't currently have one for the RT models. My apologies.

It depends if your pulling off an accessory power plug already on the bike or running through an aftermarket fuse block. You're going to be limited to the amperage of the fuse your running the circuit through. These LED's pull minimal current.. say around 1 amp for one night rider light. We have 12 LED products on one F3 with no issues.. some are plug n play with factory plugs and some are hooked up to an aftermarket fuse block like the one shown in this video.

@@Slingmods What if you dont have that accessory fuse block how would you power the night rider led light.

@@mitchellpaulson1192 You could hook to the battery as well and turn on/off with the included remote control.

Hello Harry, we have a bunch of stuff coming.. but here's a few we've launched so far: www.slingmods.com/canam-spyder-rt-saddlebag-led-reflector-kit-2020-up-tricled & www.slingmods.com/canam-spyder-sequential-front-fender-led-reflectors-spyderfenderz-tricled-2019-up

Hello Lauren, these are available here: www.slingmods.com/can-am-spyder-f3-night-rider-light

Hello Jack, we're working on a Ryker version along with about a dozen other Ryker lighting products with plug n play connections. Stay tuned...

Hello Frank, the fuse box shown in the video is actually an aftermarket fuse block we sell. If you don't have that, you can connect directly to the battery and use the remove to power on & off. Please let us know if you need any further info. Thanks!