Can An Offset Winged Plane Fly In Ground Effect? 

Hahaha! Hey Alex! Thanks man! So honored to hear that from the hot glue globulation expert!! Thanks for watching my stuff man it means a lot!

That's alright

Nice profession you picked! Lol! It looks so weird when it's flying! I think you need to make one with with an excess of power, and try high alpha, all kinds of other flight aerobics. Lastly, Could you fly it through an piece of foam with that goofy shape? Airplane, jenga or Tetris?

it's also really funny i think

That was an awesome story! Thanks for sharing!❤

Your instructor's principals are 100% correct. The only thing you did was changing the angle of attack. Try using a undercambered propeller next time you power your aircraft.

Many years ago at the desert I flew a sailplane at 180mph 6 inches off the ground for nearly 5 miles. With almost no energy lost. Was able to pull up at the end of the run to about 500 ft agl and land normally. Amazing how the induced drag was almost non existent! If only I could do the same with parasitic drag.

Thx man! Good to hear it’s getting better each video! So the camera is a run cam nano RunCam Nano2 FPV Camera 700TVL... www.amazon.com/dp/B07ZNPZZQJ?ref=ppx_pop_mob_ap_share And the VTX AKK X2 5.8Ghz 0.01mW/25mW/200mW/500mW/800mW Switchable FPV Transmitter Compatible with Betaflight OSD FC a.co/d/91b7w55 Also the antenna FOXEER FPV Antenna Lollipop V4... www.amazon.com/dp/B07JFXY8NG?ref=ppx_pop_mob_ap_share

🔴 What Is Islam? 🔴 Islam is not just another religion. 🔵 It is the same message preached by Moses, Jesus and Abraham. 🔴 Islam literally means ‘submission to God’ and it teaches us to have a direct relationship with God. 🔵 It reminds us that since God created us, no one should be worshipped except God alone. 🔴 It also teaches that God is nothing like a human being or like anything that we can imagine. 🌍 The concept of God is summarized in the Quran as: 📖 { “Say, He is God, the One. God, the Absolute. He does not give birth, nor was He born, and there is nothing like Him.”} (Quran 112:1-4) 📚 🔴 Becoming a Muslim is not turning your back to Jesus. 🔵 Rather it’s going back to the original teachings of Jesus and obeying him.

.

Love your videos and thought process. If you don't have a college degree, split your money between them. A video from an engineer with your presence will make bank. Get your Masters with what you earn, and you'll always have work. Sorry to be a dad, but love your stuff and you have great potential

It could benefit from a little dihedral.... then it should auto correct back into more of a straight line. Thats probably why it holds a turn....

@@cysieger5212 👉🔴What Do Muslims Believe about Jesus? Muslims respect and revere Jesus (peace be upon him). They consider him one of the greatest of God’s messengers to mankind. The Quran confirms his virgin birth, and a chapter of the Quran is entitled ‘Maryam’ (Mary). The Quran describes the birth of Jesus as follows: (Remember) when the angels said, “O Mary, God gives you good news of a word from Him (God), whose name is the Messiah Jesus, son of Mary, revered in this world and the Hereafter, and one of those brought near (to God). He will speak to the people from his cradle and as a man, and he is of the righteous.” She said, “My Lord, how can I have a child when no mortal has touched me?” He said, “So (it will be). God creates what He wills. If He decrees a thing, He says to it only, ‘Be!’ and it is.” (Quran, 3:45-47) Jesus was born miraculously by the command of God, the same command that had brought Adam into being with neither a father nor a mother. God has said: The case of Jesus with God is like the case of Adam. He created him from dust, and then He said to him, “Be!” and he came into being. (Quran, 3:59) During his prophetic mission, Jesus performed many miracles. God tells us that Jesus said: “I have come to you with a sign from your Lord. I make for you the shape of a bird out of clay, I breathe into it, and it becomes a bird by God’s permission. I heal the blind from birth and the leper. And I bring the dead to life by God’s permission. And I tell you what you eat and what you store in your houses....” (Quran, 3:49) Muslims believe that Jesus was not crucified. It was the plan of Jesus’ enemies to crucify him, but God saved him and raised him up to Him. And the likeness of Jesus was put over another man. Jesus’ enemies took this man and crucified him, thinking that he was Jesus. God has said: ...They said, “We killed the Messiah Jesus, son of Mary, the messenger of God.” They did not kill him, nor did they crucify him, but the likeness of him was put on another man (and they killed that man)... (Quran, 4:157) Neither Muhammad nor Jesus came to change the basic doctrine of the belief in one God, brought by earlier prophets, but rather to confirm and renew it.

Hahaha awesome dude 😎. HOME and LAKEY INSPIRED.

@@eternalprogression Thanks for the inspiration! and solid video

@@Dohpamine_Design thx man!

Yes! I would learn onshape. It’s free and runs on almost anything. Just come up with a simple design to start out. Something like an attachment for your phone that connects to your Xbox controller. Or just a pencil box. or even a fidget, spinner. And if you enjoyed doing that, and you learned a lot THEN I’d get a printer. I’d just get a cheep one for like $100. And start printing! And when you do start printing, just know that your object will probably be different when you print it in real life, you’re just gonna have to reiterate it a few times and that’s normal. Usually when you print it it’s also like .2 mm bigger in real life in certain dimensions. So you might have to accommodate for that. One really important tool you have to have if you’re gonna design something that you want to interact with another object is digital calipers you can get them from Amazon. So if you wanted something to hold onto your phone, you would want an accurate measurement of the phone with the calipers. And that’s it. If you have a hard time learning Onshape, I’d try something else like Tinker cab and as always look stuff up on RU-vid, watch some videos and you can learn a lot! I hope this helps. Thanks for the comment!

He did what you asked in the video already.