Can I at least get it to run? Real deal steal appeal! 

Scott from Cold War motors has done the head on these to get them going . Best that you took the head of and cleaned any rubbish out as you will do damage if you don’t 🤦🏼. Any way MOPAR for life . 👍🏻🇦🇺.

That's one of the best engines Chrysler ever made. Excellent job putting her back together and running, even if on three cylinders. Hope she's eventually restored and not rodded

august 17th. 2023 12.51 Pm cst USA.. thank you for your service to our country.Sir. Mortske repair didn't like having to pull starters off or heads on these old flatheads for sticky valves, but he did many times. you have done a very nice job on this old Plymouth sedan.

Very nice old Plymouth. Really solid condition. I remember in the late 50's early 60's most of these ended up as stock cars or demo derby queens. Great save - always liked these Plymouths.

Great car! That was a excellent year. I would like it black but it’s really cool!! and those old cables you can soak the whole cable in a little bit of oil and it’ll get through the outer casing let it soak for a while.

always glad to see the old ones come back to life.please dont cut it up.

At 09:27, that looks like a vacuum wiper motor. I sure hope whoever buys this great old classic will fully restore it and not butcher the thing by making it into a hot rod or resto-mod. There's enough of that junk on the road already. I really wish I had the money, and the time left, I'd love to have this car and give it a chance to be what it was when new.

Love your patience with this stuff. 👍 Nice work 👍

Amazing condition for it's age. I hope someone gets it that will keep it original.

This episode was very gratifying! Like literally turning back the clock and bringing it back from the dead!! 💯💯💯

Good job getting the old Plymouth running

It is very exciting when it turns over and starts!

For an old car in the rust belt, it's in great shape

Yeah, I miss you. I miss you doing things like that bread. Good job you did real good

... Well, you are awarded, an Official 'At-a-Boy' award, for perseverance and genuine honest effort at reviving this car, to the point where it is today ... 🇺🇸 ... 🏆 ... 🇺🇸

Impressive! That car is awesome. Spotted my BGPs with the feebs, lol. Crushing it.

Looks like an old moonshiners car! Pretty cool!

Those flatheads are easy to work on most of the time it's not stuck but the valves are always stuck. It's easy to take the head off to free up the valves and putting the thing back together is simple you can even reuse the head gasket just spray some of the copper gasket maker on the gasket and have never had a leak from them and have always got those engines running.

I reckon you might only have 2 stuck valves now Brad, sounded like it was running on 4 to me anyway. Like this one a lot, thanks for posting!

Sweet old car! Good work on getting it back alive.

you of all people should remember"trust but verify."thanks for the videos love your builds!!

Cool old school car. Glad you at least got it running for a while. Hope to see more on it but I'm sure someone will snag it up.

Condition wise, it doesn't get much better than that for an original car from the era. That car is in great shape. The car is a project, but it is rare to find a 90 year old car that you won't have to spend a year doing rust repair on. There is a lot to work with on this one for someone who has the time and resources to do it.

I love it! I'm currently building a 1931 Plymouth Sedan with a 318 for the No Name Nationals!

Very cool video. Thanks for sharing. Fun to see the progress.

Im glad you are back. been missing your content here in Charlotte

Good video on the car

Fantastic car. Great work. Can't believe how good condition it is for 85 yrs old. Be great to see it driving & bodywork cleaned up. Thanks for the video. 👍

That car not being in neutral reminds me of the time a customer brought a full size 80's bronco in the shop because it "wouldn't start". After checking spark and fuel and scratching my head as to why it wouldn't start, I decided to check timing by sticking my finger in the number one plug hole. Not only did I not find any compression but I didn't even feel any kind of piston stroke at all. Climbed underneath to investigate and found the number one rod shot out of the side of the block! 🤦‍♀️ Ask the customer if he heard any noise before the truck shut off and he said "no, I was just driving down the interstate and it just shut off!.... No warning whatsoever!!!" 🙄 Needless to say, it had to have been making a hell of a racket before it let loose! So I know it was making some noise before it blew! And had the customer just told me the truth it would have saved me a couple hours worth of Labor trying to diagnose why the truck wouldn't run! Lol! I would have been much happier if he just said "it made a loud bang and then just shut off"! 🤦‍♀️

What a beautiful car with nice patina. I hope you can keep it as original as possible.

Thats heated screw driver is old school my father showed me that on his 70 bug when we did the carpet very cool to see it again She is very cool ride

great video thanks for sharing

I hope you find a good home for it. Nice you got it running.

Impressive 👍, thx for saving these treasures 💪.

Glad to see what you did here Brad. I hope you do a follow up video on this 38. It was my fathers first car and I loved it. Thanks for sharing.

WOW! Great video. That was a lot of work. Your a very hard worker. Don't you have a friend to help you restore the car ? That's a lot of work to do for just one person.

Always loved this design, we had some soviet car back in the day in a different color, Moskvitch 400 or something, if I do not make a mistake they took the design from Opel Kadett the old model. Since my childhood I look at car bodies like this with joy. It looks so similar.

Nice work! And it runs!

It's cool seeing an old 30's car, you made it look real good! I gotta admit, when you first popped the hood, I thought I dunno about this one firin up! 😄But you got it man, didn't sound too bad either!

Awesome always cool stuff always thanks 😎

Wow, that's so great that you got her running Brad. That car is in surprisingly good shape, you do some remarkable work. Great video is always 👍✌️🇺🇲

vacuum windshield wiper motor the part you pulled out of can

Dam brother that thing looks super for what it was lol

Love seeing these old restoration

Congratulations on getting the ole girl starting. Like you said it’s going to need some love. Great Job ! ❤️💯👊👍

What a beast I love it...greetings from sth Australia 🇦🇺 👍

You have an interesting car with a nice color. I applaud your good work replacing all the removed parts.

What a beautiful old Plymouth! Wish I could play with it as I am retired and never had a vehicle that old but now where I live in a retirement community we can't do this type of thing! Still wishing in Florida!

This is the coolest color/patina ever! Must be many of those left in this state but only one like this

That would make a great cruiser with a little work.

and this would have been a great project for Derrek at VGG to tackle and drive it all back roads from where ever USA to down to Tennessee.

Paul here. This may be a positive ground thing car. Had a 36 and it was positive ground.

Great job brother!,

Thanks for I r your service irac veteran I'm a Vietnam veteran

Looking forward to seeing you get her up and driving

Nice save on this old MOPAR.

Very cool thanks was fun 😊

Nice old car //////

Pretty sweet old rig yep very common to have stuck valves when theyve been sitting a while sounds like a good motor though

Thanks for another , Brother !!

Yeah, that bolted floor pan in the front is original. For easy access to transmission, master cylinder etc. There is a water distribution tube behind the water pump. They always need replacing. They rust out. enjoyed your video. Love the colour and patina of this car, Hope its kept original. Kool looking car. I own a 39 Plymouth

Cool looking car

Beautiful car. I have a '46 Plymouth P15 & '68 Plymouth Sport Fury. That '36 would look good next to them.👍👍👍👍👏👏👏👏

Sounded pretty good on three cylinders

Beautiful car. Wish I had a place to work on it. Would make a great car to run errands and such around town. Maybe take some short trips with once complete sorted out.

The thing in the coffee can was a vacuum wiper motor

The part that you didn't know what it was in the beginning is a vacuum windshield wiper motor

Wish I had the funds to take that off your hands Brad. It's a neat old Plymouth.

Well, you did your best on getting her run a little . And it cleaned up.OK .

Make a special 90° bracket that will fit down the sparkplug hole and mabie tap those stuck valves loose

Amazing job good look

A trap for young players, i hope someone restores the car, i think it is well worth it, KEEP IT 110% ORIGINAL, NO STUPID LS swap or that kind of CR💩P!! Would be Super Cool too have the old valve radio back in place HOPEFULLY it Might still work???? The old Flathead engines are Tough, lift the head off ( unlike a modern car it is EASY ) hone the bores lightly, best to take off the sump clean out the sludge, put in some 30w oil nothing fancy ( oil, they were built for just simple plain oil! )

Great job 👍👍

we worked on one of these in auto college back in the 70's here in England.

You have stuck exhaust valves so locate the location via the spark plg holes and get some of that spray you use directed at the valves,you can also try a teaspoon of petrol down the spark plug hole and put your butane torch to it make sure that there is NO petrol in the carb this is just a way of putting a bit of heat to the carbon etc which will burn it off the facesas aprecaution have your remote starter handy if the fire starts to go awry just grank it and it will blow the flame out. Best of luck ! Chris

Saw a '38 Pontiac on another video the other. Oddly, the radiator cover is very similar.

Dude you're awesome I love it

First-time viewer very very fun and educational to watch. Keep up the good work I can't wait to watch more. I love these type of shows, and yes, I subscribed 😂👍

its hard to no where to start i have a 1960 morris minor 1098 cc was just in need of t l c that was 2 1/2 years ago new clutch , new all around breaks linings re con back diff electronic dizzy new dash new electrics new head gassket new plugs i when first started ripped it all apart NOW ON NEXT PROJECT WILL DO IT MORE SLOWLY MAN SHE LOOKS GOOD DONT CHOP HER OR CUSTOMIZE HER SHE WILL BE GREAT AS SHE IS

Sharp looking car , great body lines would like to see it with some Torque Thrust wheels and wide tires a modern V-8 with a 5 speed .

The Plymouth of that era have tapered axle shaft and you will need a puller to remove.

9:28 That looks kind of like a vacuum windshield wiper motor, but I couldn't get a good look at it.

its a cool color ! , ya some mmo juice should help also even pb blast , ive mixed them together and they work good , if the rings are intact theyll come around

That car is a beauty 🌹👌

I always wanted a pre ww2 dodge. I'm sure it's out of my price range unfortunately!?!

License plate light lens 8:38 Vacuum wiper motor you had in your hand in the can 9:27

I had a 36 Dodge in 1967. Bought it for $25 and it ran.

dri slide for motorcycle cables works great

Great job, your onn itt,always time & of course money. P.S. Tx.

the 1st thing you pulled outof the coffee can is winshield wiper motor.

Great content! Subscribed!

Good job all it took was somebody who knows something about working on a car. You could check the valve clearance on the side of the engine without taking the head off. Put a Volkswagen electric click clack fuel pump on it.The work you did the price went up by 1,000 I would say.

👍 ✌good work

I have a friend that has a '37 Plymouth in his back yard that I'd love to get running

One of the first things that you showed that like a half moon is a windshield wiper motor .

The thing you pulled out of the box and didn’t know what it was… it’s a windshield wiper motor. For the vacuum powered wipers

Good solid car for someone with more money than sense. ;-) Good job of assembling everything you could and should be fairly easy to install a modern engine and automatic just to make a cool weekend driver. 9:28, looks like a windshield wiper motor.

Man my dad had a 37 plymouth two door slantback with a 327 4 speed when I was a kid it was solid surface rust but all the brightcwork and grille were dang near perfect some old man bout it and restored it back to factory with a candy brandy wine laquer paint job it looked tough solid surface rust but was beutiful with that laquer on i

Dont shoot me now,, Thats a beautiful survivor... but id love to see that body put on a newer frame complete with an LS... Big Tires in the back, and skinnies in the front.....whooohooo

The first thing you took out of the inside that you said you did not know what it is, it is a vacuum wiper motor.