Can it be done? Random Engine Misfires! 2004 Nissan Frontier 4.0 P0302 P0420 P0430

Подписаться 574 тыс.

Просмотров 193 тыс.

50% 1

Catalytic Converters! Missing? Running Rough P0302 P0420 P0430 Nissan Fronter 4.0 v6
• Catalytic Converters! ...
Visit my Second Channel on RU-vid, RainmanRay Off Duty / rainmanrayoutoftheshop
Follow on Twitter: @RainmanRay4Real
Check out my Merchandise (because I don't say MERCH) for Men's and Women's Apparel, MUGS and Stickers!
"Wife Unit" T-Shirts and more rainmanraysrepairs.myspreadsh...
rainmanraysrepairs.myspreadsh...
Support the channel on Patreon: / rainmanraysrepairs
Patreon is a "Tip Jar" I don't post much there, daily YT uploads are all that I can manage for now
Amazon List, must have for any toolbox!
ATD Tools 13782 10-Piece Triple Square Spline Bit Socket Set amzn.to/3RV2fUB
Same as Matco. Mountain 5-Piece Metric Double Box Universal Spline Reversible Ratcheting Wrench Set; 8 mm - 18mm, 90 Tooth Design, Long, Flexible, Reversible; MTNRM6 amzn.to/3OJTRp2
Mercedes BMW VW Wheel Stud Master Kit: amzn.to/3OszRaL
Bahco "Frustrated" Pliers AWESOME tool! amzn.to/3IfDeOa
Brake Caliper Compressor: amzn.to/3gQBuiB
My Camera Gear:
Gopro Hero 10 amzn.to/3AaxELe
Gopro Hero 9 amzn.to/3EKDcM1
Hero 9&10 Dual Battery Charger MUST HAVE! amzn.to/3g5KdAT
Flexible Camera Mount amzn.to/3Jywrk5
As an Amazon Associate I earn from qualifying purchases. #commissionsearned.
Also, I personally use or have used the products featured in my links and only recommended them if I feel they are of good quality.
”Intro Music by Karl Casey @ White Bat Audio”
Thanks to Jesse for making the intro and graphic for us to enjoy!!!
“All the videos, songs, images, and graphics used in the video belong to their respective owners and I or this channel does not claim any right over them.
Copyright Disclaimer under section 107 of the Copyright Act of 1976, allowance is made for “fair use” for purposes such as criticism, comment, news reporting, teaching, scholarship, education and research. Fair use is a use permitted by copyright statute that might otherwise be infringing.”

Авто/Мото

Опубликовано:

30 дек 2022

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 940

@Voltikz95 Год назад

Ray has this amazing ability to post a video right as I'm about to go and do that one chore I have been putting off all day 😂😂 now while I'm supposed to be under my car changing a sensor, my ADHD ass will sit and watch a random Florida man fix cars 🤣 Love ya Ray!

@buffalomerkis7603 Год назад

I do recall advice my grandad gave me, a mechanic and workshop foreman for over 40 years, 1. Never rev up an engine and then shut it off. 2. Leave an engine to idle for a few seconds or up to a minute (longer if towing or doing heave work loads) before shutting off (saves the turbo and prevents oil starvation, also settles down high temperatures) 3. On an automatic, put into neutral, then put on the hand brake (parking brake for our USA chums) and then put into park. (Stops loading and strain on the transmission)

@troypirt3864 Год назад

🤣🤣

@GeorgeSemel Год назад

Well, I like Florida Man news and Ray's Florida Man Repairs. The right to fix is important. Ray really knows his trade. Guys like him are very rare.

@samholdsworth420 Год назад

I need to be working on my truck as well

@ManBearPig3 Год назад

@@oogabooga2476 theres a CLUB!???

@wwjoshdew Год назад

I spent my entire lunch break watching you work on a car. Now I gotta get back to work and work on cars. Much more fun watching you work through.

@milesb4231 Год назад

This is why I don't like those signs at the mechanics that say they charge extra for watching.....you know we all want to... :)

@martinvs6415 Год назад

One thing I have learned from Rainman is patience..(edited) A couple years back, I would have given up completely but as I am watching Ray work away at a hidden unreachable nut with no swearing and sweating, I do not feel the need to turn off this video because of blood pressure issues. You the man, Rainman Ray. Love your videos and want to wish you the best in 2023.

@genehasenbuhler2594 Год назад

Next you need to learn how to spell! Patients? Try patience! Patient's are people who see a doctor- patience is something you learn!

@SMELLGOODER Год назад

@@genehasenbuhler2594 you beet me to the shade!! 😎 See what I did there? 😃

@martinvs6415 Год назад

Yes, I can spell that too. Stupid spell check. I have no patience for that . I stand corrected. lol

@genehasenbuhler2594 Год назад

@@SMELLGOODER I see! Not clever! Rather stupid on your part!

@martinvs6415 Год назад

@@SMELLGOODER very good. what are you a spell check grammar nazi? Have a Happy New Year.

@leegunter5223 Год назад

Love the Wife Unit Tee ! I guess people who think it's disrespectful never watched Coneheads!

@kicknsystm Год назад

I did not know those coils came apart. These surprise bits of knowledge you provide help out at the most unexpected times. I have a friend that asked me why I have to have my morning cup of Ray and I tell him I never know what I might learn next.

@electronicengineer Год назад

"morning cup of Ray"

@CouchMan88 Год назад

On my Toyota you can actually just buy the boots so you don't have to replace the whole coil. One of mine was pretty brittle so when I pulled off the boot a chunk of plastic from the coil broke off. I just plastic welded it back together because I was too cheap to buy a new coil and it works fine.

@bobbg9041 Год назад

This reminds me of the proctigist surgeon who decided he wanted a new trade, so he decided to become a mechanic, the instructor gives him a test, When he was done with the car he gets in and starts it up, it runs perfectly, the instructor said he passed the test, but he was super impressed that he rebuilt the motor through the tailpipe.

@etowahjazz Год назад

I heard it was an OB/GYN!!

@Hoaxer51 Год назад

And with the engine running! Lol

@peterparsons7141 Год назад

Wishing Rainman and Family a prosperous, healthy, happy 2023!

@iantyler4045 Год назад

If I attempted that job my neighbors would be running inside covering their ears. You are a patient man.

@pubearoo Год назад

I hate mosquitoes and wasps as much as you. I appreciate you my friend!

@wrench31e22 Год назад

You ain't having fun until a water moccasin comes out of a tire. Lucky for me the owner was standing right behind me when it happened and he didn't even slow me down.

@108gk Год назад

A rattlesnake inside my van made me stop in the road and jump out. Somebody called 911 and a deputy showed up. She called the fire dept and they sent their rattlesnake catching fireman. It took all of 30 seconds for him to get the snake in a pillowcase.

@MikeB92 Год назад

Learned a trick when I worked at Nissan. Through that gap in the intake the coil will come out as a whole. Spin it around so the connector part faces the back and it’ll come out. It’s tight for sure but it’ll make it.

@JpBollin97 Год назад

I was thinking that taking the air intake would be easier but after reading a few comments it sounds like it's more of pain in the ass to remove the air intake just for the coils.

@emausderratsuchende5447 Год назад

As an observer from old Germany, I wish you, your wife and your children a prosperous New Year 2023....

@senffabrik4903 Год назад

you know thats everthing allright when wife units shines at you everytime she appproaches. :)

@TheBudliner Год назад

Wow your shop is growing at light speed. Can’t believe how fast word got out, you have a great place to get things done right….

@GodsServant52 Год назад

My 4 cylinder Camry gives me reason to enjoy working on it. (Ease of replacement, cost of parts)

@randybeard6040 Год назад

You Got that Right on a 4 cyl. Toyota, my wife's Lexus 350 is not that easy to work on...

@scorpion2005765 Год назад

Funny.. my wife doesn't watch your videos, but I do so often she has picked up things you say. I walked into the kitchen the other morning to get more coffee. Well "my" wife unit had the pot of coffee and said "pouring things" while putting some in her mug! 😆

@sophiedolman2230 Год назад

"Two fingers, work them back and forth.....try and get my thumb in there!! " I spat my tea out then, my partner was nearly crying. Happy New Year Ray xx

@angryscottishidiot Год назад

I love the fact we now get to see full projects. And the customers seem to be nicer too; not rejecting necessary work cos the 'desk' don't know how to do their job.

@forgetfulme1719 Год назад

he discounted the bill to make the filming.

@davidmarshall5603 Год назад

The people behind the desk are there to make money but people have go wise to there plan and reject any further work

@patrickdiehl6813 Год назад

When the "book" or someone says it has to be done this way my brain immediately begins to question the logic. Just because it's challenging doesn't mean you can't and a good challenge is way more satisfying when accomplished. Do not forget to have yourself (family unit also) a great new year 👊

@leosmith848 Год назад

When I were a 'prentice back in te day training in a big company, there was the way they taught total idiots to do the job, that was foolproof, and needed to be. And there were all the 'guidance of wise men' understanding that enabled one to do it faster if one knew how. Disassembling/reassembling those coils is for wise men only.

@CouchMan88 Год назад

Same on my 99 Sienna. Book says you have to pull the intake manifold. I did it without it. Definitely tight but I think there is more room than on this car. If you are doing the plugs it is more difficult because you have to get an extension to fit. Luckily Toyota put the coils on the front three cylinders and just runs a wire to the rear so coil replacement is super easy.

@alandent7231 Год назад

Thanks for being there in 22. Learned a lot. Looking forward to 23

@sherndon1234 Год назад

I used to cheat on bolts like that. I'ld get my sons when they were young enough and still small enough to get their small hands in places like that😁

@alisaleh6100 Год назад

Perseverance, patience, and determination and a few words that describe Ray's work ethnic. And I thought I was the only one who says please and thank you to a car when I'm struggling to remove or fit parts! Phew!!!!!

@goldfishhhification Год назад

A nod to The Count.... LOVE IT!

@farmermiyagi1338 Год назад

Yessir boys! I got the shop completely cleaned out yesterday to end my week, and for the next 2 days I will be a fishin technician. Last weekend it was 7 degrees, this weekend mid 60's. Here kitty kitty kitty!!!

@kenm6948 Год назад

I’m amazed at how Ray expresses concern that his viewers are able to see what he is doing.

@garycurry4600 Год назад

Nice to see Wife Unit wearing Wife Unit merch that was designed by Wife Unit 😂. Happy New Year to you and your family, Ray! 🎉

@ronsloan7662 Год назад

Hey Ray, that Frontier is like night and day from when you started it. Also love the progress you've made on Project Jeep. That has been an interesting series to follow. Keep up the great work. Cheers!

@jerebigler7520 Год назад

Points for sticking with it . Not certain it was the least painful way, but it was the principal of the whole thing. I get it. Even though you could have removed the intake and done it in the less frustrating manner, you stuck with it and did it your way. Congrats for being bullheaded..and winning!

@beauthestdane Год назад

I like that you specifically mention when not sponsored, it shows that you trust that product.

@ThEeDaRkOnE666 Год назад

Morning from Scotlandshire! Love it!

@Kashed Год назад

Happy New Year Ray, Wife Unit, and family. 🍾🥂 Here’s to a good 2023 with more tools and spa days for the Wife Unit. 👍🏻

@dantesinfernopurgatory7826 Год назад

3:35 - Ray harnessing the power of Force Lightning.

@nospamevereh Год назад

I SOOO needed the "COUNT" and the zen calm to end the year. Thanks Ray. I miss the doodley doodley doo. What about the trains in the background, Chooo choooo!?

@michaeljeffery9898 Год назад

Happy new year to you and your family ...from your mates in Australia !

@GeekBoyMN Год назад

Great bonus video with Project Jeep! I'm totally ready for the wall delete video! The current shop config feels a bit cramped IMO.

@jackfunk5765 Год назад

yep. my day has started. taking a dump watching Ray.

@Garagenyckeln Год назад

Best instructions reader ever! 😂 ”put that piece on that piece, got it” 🤣🤣🤣👍🏻

@jounijahi898 Год назад

Greetings from Finland and happy New Year to You and your family! I watch all your videos and I have learned a lot about handeling tools in and around my car. Keep on making good work and thank You that You are sharing us good tips to service our cars.

@K.Kelly87 Год назад

I really LOVE how you make us feel like we are actually helping. Love love love your videos Ray! I have a similar issue on my VW 2.0 4cly. TG it has a single coil pack + wires!

@howardpringle9346 Год назад

Personally, I like project Jeep. I have been watching a guy in Australia build an Alferrari for 3 years. (an Alfa Romeo with a Ferrari engine) Projects never get old to me. Keep up the great work.

@JBreeze4598 Год назад

The Count, YES!! Now we need the "Word of the day" to go crazy over. Oh' just to let you know Ray, my 16y/o daughter has started saying "Gravity" it's awesome.

@boingoballs Год назад

Happy New Year ray to you and your family. Also to all the subscribers and viewers

@TheFrenchPug Год назад

Where there is a will and long fingers, there is a way. Happy New Year's!

@thecuss6817 Год назад

My own 2004 Frontier and my 1998 Frontier both have the 2.4 liter engine, so much easier to access stuff (and a timing chain instead of a belt). Those each have a distributor and typical spark plug wires.

@11thunder07 Год назад

Get yourself an assortment of different sized neoprene fuel line (used on motorcycles) and slip it over the head of those hard to reach bolts to turn them out and in.

@petersmart1999 Год назад

I just did spark plugs on my Duramax,they were not easy at all.I had to remove the timing rope cover,and the outake manifold.The dealership said diesels dont have vacuum,so I installed a wet vac in the bed and ran the hose up under the hood,much better now!The entire job took several minutes,but I managed to get it done.Kidding aside,thank you Ray and family and have a great holiday!

@eddieMurphy11111 Год назад

I have lost count in the 1960s when i used to get this problem on my mini and no matter what i did it always re appeared after i had renewed everything but the mini's where prone to getting water on the engine thanks for the video and have a great new year for you and your family

@wadet73 Год назад

Same scenario on my Durango. I had a new long block installed last year and the original, 20 yr old coils were used. I just changed them all last week and 😲 I had no idea my truck could run so smoothly

@ronaldbrosius7488 Год назад

You should definitely bill the customer at least 2hr. That's what will help out shop, 2hen things don't go right or when troubleshooting takes longer then it should. It all adds up, and the customer still getting it done cheaper then expected.(win/win for everyone)

@renzoubaldi3879 Год назад

Great to see the Datsun purring like a kitten. Happy new year to you and your family from all in the land down under!!

@mattnelson5322 Год назад

Since you don't have the phone ringing loud anymore, you could make the choo choo sound when the train goes by lol! Good video! Thanks for sharing!

@jrt77339 Год назад

My granddaughter has one of these trucks that will need this service. Glad to see that the intake doesn't have to be removed !

@cranefly23 Год назад

Thank for being so interesting and entertaining, Ray. Happy New Year to you all.

@fasteddy3336 Год назад

Ray, great video. It’s nice that you cut the customer a break but remember you need to keep your family and business going. Thanks again for your amazing channel!😊

@BrianHoff04 Год назад

Obviously I like your video's... I keep watching them. 🙂 Your comment about billable hours reminded me of thoughts I've had. I work in a CNC Lathe shop. For 5 years I was the estimator. To make it simple it's time on our machines (the type of CNC determines the cost per hour) + Material + Any outside ops + Markup = Price to charge the customer. Obviously our intent is to be competitive yet make a reasonable profit. Trying to prove that our price is real turns out to be a fools errand (though I hear people think it can be done). Time on the machine is important... it's how we schedule for several weeks of production and not over-promise / under-deliver. But the actual cost of that time has so many possible variables it's not possible to account for all. You would literally have to add the cost of trying to know to the cost of the job and you will always have a moving error rate. In the end how you charge needs to accomplish a few things. Be competitive enough to get work. Get paid enough to cover the cost and earn enough profit to make it all worthwhile and to re-invest in the company. If you create a pricing system that can accomplish that then that's a pretty decent system. Too many times I watch people spend time worrying how "accurate" their pricing system is and chase weird avenues that are fruitless, have variation they don't know about, and they fiddle around thinking they can fix it when usually they simply make it more complex without any improvement or they make it worse.

@steann1 Год назад

.. and you also have to add in the cost of the person who is costing the job.. .. headache..😵‍💫

@EvilChuckie Год назад

Happy New Year Ray from Australia, good to see you out on your own and making headway, good luck my friend.

@josbouwman Год назад

Happy new year to you and your family, Ray! Love your video's!

@justinlanglais9825 Год назад

Great video Ray as usual ! I've used a little silicone spray on sticky exhaust hangers to assist in removal and installation.... works like a champ!

@martinvs6415 Год назад

We used it for all kinds of stuff, like little windows in passenger side doors of International trucks. If you locked yourself out you could take the glass out reach in and unlock it. Spray silicone on the rubber to get the glass back in. It was a regular occurrence.. if spell check inserts any words I did not intend...so be it! Nothing to do with silly cones.

@gasselectric Год назад

Good job and Happy New year

@philipwilson4025 Год назад

I was up most of the night and I decided to watch pro jeep. I’m stunned at the amount of work that has been done on it. If it was me I would have scrapped it bye now thank goodness I’m not in to cars I prefer tractors and farm vehicles that have to work on the land

@billloomis7611 Год назад

Very nice work on both vehicles. That was really an easy exhaust install with the lift and your skill.

@dantesinfernopurgatory7826 Год назад

11:53 - Ray at least has the common courtesy to give that coil the reach-around.

@AntonioClaudioMichael Год назад

Always nice not having to remove a intake to do coils or spark plugs when there is just enough room for ya fingers to get the bolt removed and installed @Rainman Ray's Repairs

@ericolsen9799 Год назад

I wonder why no-one ever gives love to Nissan? I never hear anything bad and that are all over the road? The new series Nissan Titan is an amazing v8

@ladonnaghareeb4609 Год назад

Great to see Wife and kids in the shop. Best wishes with the new endeavor, looks to off to a great start. Have a wonderful New Year, and everyone stay safe.

@alannock1358 Год назад

Behind every successful man is a wife unit.

@Matty7272 Год назад

Hi Ray, just wanted to send an Australian Happy New Year mate. I wish you, the wife unit and the tribe have a safe, happy, prosperous and healthy 2023.

@rtp4919 Год назад

Happy New Year to you and your family, as you start the year before us. From Longwood, Florida I wish you only the best. 🌴🎊🎉

@richardwarnock2789 Год назад

Happy New 😊 Year Ray!!!

@TheMedicmudder Год назад

Really like your channel! Its cool the way you explain what you doing!! Great knowledge!

@oldschool1993 Год назад

Actually, you could get a new coil to fire through the boot as well, because it will seek the closest possible path to ground and when it is disconnected from the plug it will go through the boot to the head. Also you said the plugs were new, but you didn't check them for gap- a plug with too much gap will also force the spark to find a different path to ground. ( Don't rely on the skill of a previous mechanic). But, if the customer is OK with all new coils, then it is a good insurance against future problems.

@sparksalot4950 Год назад

Saw where the boots were torn and spark was leaking through the tears, will a new coil just random fire through a new boot ? Doesn't seem likely...

@oldschool1993 Год назад

@@sparksalot4950 Watching the original video you can see that one of the boots was really bad- spark going everywhere- the others were sort of marginal- Yes a new coil will fire through the boot if it has no other good path to ground.

@nzldbart Год назад

Just turned 2023 here in NZ, So Happy New Year Ray; all the best to you and your family have a safe New Years and roll on 2023, can't wait to see what the new year brings to the business

@Amen.22 Год назад

I still have to wait 1 hour and 10 minutes before it’s 2023

@ToConnect2000s Год назад

Thank you Ray for your awesome content. Have a great New Year.

@Impeeza Год назад

Happy new year Ray. Blessings for the family.

@Jay-uw2eb Год назад

Nice work man some times that bit of effort with the flanjies is a win win for both your work and the customers pocket, been there a few times. I hope 2023 brings you much success 😎

@StackAndPrepper Год назад

It's amazing how you can get the camera into such tight spots so we can see. When I'm working on a car I can barely see what I'm doing. Kudos on your video skills!

@michaelmcclure8673 Год назад

Happy New Year Rainman and family units.

@jackieslack7999 Год назад

Ray, I hope you and your family units have a nice and shiny new year! 😀

@caymanchristopher7014 Год назад

I noticed your dielectric grease wasn’t just regular grade but “technician grade”. Fancy!

@jaroslawkanski7180 Год назад

Fantastic video! As the Xterra owner, I know that cylinder 1 coil can be pain in the ass to remove. I have done that without removing the intake, and while watching this video had a little satisfaction that the pro has a little trouble removing that damn coil. :) BTW, Eric at SouthMainAuto has another great video posted this week about changing thermostat and cleaning heater core in Frontier. Happy New Year!

@MazichMusic Год назад

Between Ray and Eric, owners have quite a repair video library for their Frontiers.

@mconley600 Год назад

Happy New Year and thanks for the smiles you put on my face

@davidlieberman6512 Год назад

Happy New Year Ray and your family!

@gregusjay Год назад

Morning zee Ray ! Glad to see things are going swimmingly . .the Nissan is in good handz ! Hi wife Unit !!

@bobberndt9744 Год назад

I am all ready to see the "Heavy Duty Lift" moved to its new (straight on) position when that concrete wall, and the ceiling, get removed !! Happy New Year 🥳 RRR - Since 2022 🧰🛠

@WBOS72 Год назад

Awesome job Ray. Nice you can pass savings to your customer. Looking forward to more jeep and shop expansion video.

@AquaPeet Год назад

Really liked this video and the bonus footage of Project Jeep! Happy new year!

@fps079 Год назад

Great video, Ray. I wish you and yours a Happy New Year.

@Voltikz95 Год назад

Yknow what you need for that last bolt for the coil? A super low profile version of those little ratcheting wrenches 😅 I have no idea if thats what they are actually called lmao!

@TheCorpsehatch Год назад

4:10 The unwanted Force Lightning mod.

@davidmarshall5603 Год назад

All your videos are a joy to watch brings back my memories of working on the old HGVs, snowplow gritters and my own car

@dalejones3862 Год назад

Nice work Ray hope u and wife unit have a great new year

@tomdixon1213 Год назад

Your careful, conscientious reading of those instructions for the exhaust system install was hilarious. 😂 The Rainman does comedy!

@paulmoffat9306 Год назад

Don't need to replace the coils - you can buy new insulator boots for them (assuming you can remove the originals).

@darthtripedacus1 Год назад

Yeah I don't know why he did that. Much more expensive

@YouveBeenMiddled Год назад

With 110k miles on those coils, it's smart to replace them. One of them failed already and was replaced, probably should have done the others at that point.

@Stubby0266 Год назад

Happy New Year, Ray, to you, to the wife unit and family. Thanks for your videos and the information you provide. Keep charging forward !!!

@davefredericks6133 Год назад

Happy New Year to you Ray the Wife Unit and the Family Components😁

@leofenton9709 Год назад

12:50 no, we need more lumens

@u.p.tinkering Год назад

Sweet, bonus Jeep footage at the end! Cant wait to watch the shop expansion videos too! Love the channel Ray!

@ronwilson6186 Год назад

Happy New Year Ray and family. thanks for all the excellent videos.

@FireFly64 Год назад

Looking forward to the wall/ceiling demo ⚒🪨

@troypirt3864 Год назад

You're a rare breed Ray. One of the few honest mechanics left in this world.

@melvintyndall9376 Год назад

HAPPY NEW YEAR Ray. And have yourself a great new year!!!!

@toddhazell925 Год назад

Well, I've learnt something today, with those coils coming apart like that. I know that we don't have the touchy feely feedback of feeling them click back together for that proper connection. As a former 4wder, when I see you fit those first 2 clamps on the exhaust, straight away I could see that they could get damaged by hanging lower than the muffler in an off road adventure, instead of clamping them on from the side as with the 3rd clamp. I wouldn't know if this jeep goes off road at all, but that is how I think if I'm fitting parts.

@MrSamPhoenix Год назад

I truly don’t understand why Nissan made most of their VQ-series V6 hard to work on. Toyota is known for doing this to their V6 engines well with the intake manifold covering one cylinder bank. Why is Honda the only one of them that don’t design their intake manifold like this?

@monkehbitch Год назад

Their partnership with Renault. Ever worked on a Renault? It's like taking up gynaecology! So much of that Nissan stinks of French.

@billchmelik5697 Год назад

Guess? Because engineers don't have to work on what they design.

@monkehbitch Год назад

@@billchmelik5697 "French engineers - it will work for 100,000 kms, then it will fall apart, Haw he haw he haw, the computers will fail out of warranty and zut alors, the wiring? We will make it out of biodegradable plastique"

@nickwind2584 Год назад

When it comes to firing the parts cannon, call me a battleship. If that Nissan intake is coming off, all spark plugs and ignition coils are going to be replaced! Parts are cheap, my time is expensive.