Can You Train Someone Laser Welding In Under 10 Minutes?

Подписаться 1 млн

Просмотров 17 тыс.

50% 1

Learn what you need to know before diving into laser welding Michael from Garage Bound LLC.
Have a question, or want feedback on your welds? Join the WELD App beta.weld.com
Check out Michael's Channel @GarageBoundLLC and reach out if you have LIGHTweld Questions.
Watch This Next: Let's Talk Laser Welding with LightWELD - • Let's Talk Laser Weldi...
Check Out The Great Gear From Our Trusted Partners
Caiman Welding Gloves - foxly.link/frIVPh
Save 20% on Bomber Eyewear WELDDOTCOM - foxly.link/jgeUpI
Subscribe to our Podcast
Apple Podcasts podcasts.apple.com/us/podcast...
Spotify
open.spotify.com/show/4qWd24Y...
Ways to Work with Us
Share your work in the Weld App to let us know what you want to see beta.weld.com/
Want to make a video with us www.weld.com/partnership
Connect with us!
🧰 Web: weld.com
📣 Instagram: / welddotcom
📲 beta.weld.com/
🎥 TikTok: / welddotcom
Question - Why would you want to get a laser welder for your shop?
Disclaimer: Videos produced and made available by Weld.com or any of its affiliates, subsidiaries, or representatives (collectively, "Weld.com") are provided for informational purposes only. Although every effort has been made to provide the most accurate and useful information from sources believed to be reliable, no warranty, expressed or implied, is made regarding accuracy, adequacy, completeness, legality, reliability, or usefulness of any information. As tools, products, materials, equipment, techniques, and applicable laws, regulations and ordinances are constantly changing, Weld.com cannot and does not assume any responsibility or liability for the accuracy of the information contained herein. Under no circumstances shall Weld.com be responsible or liable in any way for any content, including but not limited to death, injury, errors or omissions in the content, or for any loss or damage of any kind incurred as a result of any content communicated in a video, on a website or by other means, whether displayed by Weld.com, or a third party in its original or a modified form. All content is subject to Weld.com and any third party's applicable terms and policies. Carefully review all terms and policies.
ALWAYS USE CAUTION WHEN UTILIZING ANY DISPLAYED TOOLS, EQUIPMENT, TECHNIQUES OR PROCESSES. IF EVER IN DOUBT, CONSULT A LICENSED PROFESSIONAL. ANY RELIANCE ON THE PRESENTED INFORMATION IS STRICTLY AT THE VIEWERS OWN RISK.
EACH VIEWER EXPRESSLY AND VOLUNTARILY ASSUMES ANY AND ALL RISKS INCLUDING, BUT NOT LIMITED TO, DEATH, DISABILITY, AND/OR SERIOUS PHYSICAL INJURY RELATED TO THE USAGE OF ANY TOOLS, EQUIPMENT OR TECHNIQUES OR PROCESSES IN THE PRESENTED CONTENT. IN THE EVENT OF AN INJURY IMMEDIATELY SEEK MEDICAL ATTENTION.
Time Codes
00:00 Introduction
00:28 IPG Photonics LightWELD XR
00:50 Laser Welding Consumables
01:05 Laser Welding Nozzles
01:29 Laser Safety Precautions
02:29 Different Size Tips
02:47 Do You Need Wire?
03:39 Setting Up To Laser Weld
04:32 Types Of Gas
04:55 2 Trigger System
05:36 Pulse Laser Welding
06:01 What Happens If You Have The Wrong Angle?
06:45 Standard Laser Weld at 1000 Watts
07:12 Destructive Testing
07:30 Why Would You Want A Laser Welder?
07:54 Downfall Of Laser Welding
08:16 How Long To Learn?
#laserwelding #garageboundllc #lightweld #welding #welddotcom
About:
Welcome to our Channel! We're passionate about providing a comprehensive space where welding enthusiasts of all levels can gather and learn.

Опубликовано:

27 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 42

@GarageBoundLLC 2 месяца назад

Here for the party

@Welddotcom 2 месяца назад

Thanks again for letting us stop by and showing us how to laser weld! If anyone is interested in picking up a LIGHTweld Machine reach out to @GarageBoundLLC

@mornepieters4600 2 месяца назад

We did some trials with single and multi wire, both solid wire and metal-cored wire, with laser, like this machine but higher wattage. Penetration is really good. Vertical @ a 45 degree angle, dragging the weld upwards had the best results. It is good for small fillet weld sizes, lap joints up to 4 mm, pushing 6 mm. Above 6 mm, it competes against other arc welding processes. Stops and starts are harder to get right. You cannot hang around and melt a tie-in. Once you start the laser weld, you need to complete the weld. This process has it's place, most definitely for sheet metal, automotive and production work with. Just sharing my experience.

@sara_7595 Месяц назад

I’m learning to use this, wire-fed, er 70s6, each stop I leave a pin hole.

@aquadan005 2 месяца назад

WOW, a production welder's dream!

@mattyd337 2 месяца назад

If you know how to stick weld, then MIG is a piece of cake if your settings are right. You can give this to someone off the street and they can produce a quality weld. I'm pretty impressed with the penetration. Definitely cool to have in a shop if you can afford it.

@geonerd 2 месяца назад

Still waiting to see a cut-and-etch on a variety of laser-welded workpieces...

@mornepieters4600 2 месяца назад

We did some trials with single and multi wire, both solid wire and metal-cored wire, with lazer, like this machine but higher wattage. Penetration is really good. Vertical @ a 45 degree angle, dragging the weld upwards had the best results. It is good for small fillet weld sizes, lap joints up to 4 mm, pushing 6 mm. Above 6 mm, it competes against other arc welding processes. Stops and starts are harder to get right. You cannot hang around and melt a tie-in. Once you start the lazer weld, you need to complete the weld. This process has it's place, most definitely for sheet metal, automotive and production work with. Just sharing my experience.

@Masteretel 2 месяца назад

There goes my job

@intiaboats 2 месяца назад

Fascinating stuff

@user-np3ok4pl4y 2 месяца назад

That's is pretty awesome! Can you layer beads for thicker materials? Can you weave a pattern? I definitely want to try one!

@morgansword 2 месяца назад

I looked at some that are out on the market and its not a simple small jobs tool unless your doing this every day. What I guess I am trying to say is the cost of one of these machines is quite a bit more than a mig or tig set up. This is the biggest one so far that i have seen doing something and it is very impressive. What I did see was one designed for sheet metal on vehicles which are a lot more complicated and not near the penetration or quality for a beginner. Any shop doing major fab work would enjoy using it. Would of enjoyed seeing how well the lazer rust and other stuff it can remove. The one I did see was okayish but again, not even close to this machine. I do believe their machine was in the five thousand dollar machine.... like "Vevor" quality which is kind of harbor freight range. Just guessing this is north of a hundred thousand dollars...thats just a guess and probably a way off guess

@GarageBoundLLC 2 месяца назад

Under 50k

@ackattacker 2 месяца назад

For sheet metal even the $5000 machines really are a “game changer”, they put so little heat into the weld that panel distortion is basically no longer an issue. The only potential issue is that fit-up has to be bang on, they can’t fill more than the diameter of the filler wire.

@morgansword 2 месяца назад

@@ackattacker Good to know

@buddylee19082 2 месяца назад

These things are truly extraordinary! And y'all didn't even go into how they can CLEAN metals also!? I'm so happy to be alive at a time where technology is making things like THIS^^^ possible. And if I understand it correctly, it's a very similar LASER technoclogy that is making the 3D printing of metals possible!? Which is just 🤯🤯🤯🤯🤯

@loweek9646 2 месяца назад

Laser cleaning requires a different laser source. That's a whole other subject! ;-)

@stusue9733 2 месяца назад

@@loweek9646 You mean like at 1:10 when they say to laser clean change nozzle and setting?

@loweek9646 2 месяца назад

@@stusue9733 No lol. Laser cleaning with that kind of laser source will remove rust and other stuff but will damage the substrate; Only microscopic though. So if you would laserclean and then paint; your paint will fall off after a few weeks/months. There's specific laser cleaners if that's what ur looking for. This still remains a laserwelder.

@stusue9733 2 месяца назад

@@loweek9646 Going to have to ask for a source for that claim.

@loweek9646 2 месяца назад

@@stusue9733 If you'd have access to these machines and knowledge on how this work. Try for yourself and see. Not going to say much about this in detail but I'm working with laser fabricators for cleaning and welding on a daily basis. The claims I've made are direct from my personal experience.

@EvanShea-uv8jo Месяц назад

interesting laser glasses you have there.

@skywelderrocky 2 месяца назад

Whoa whoa woah-I am, was a welding inspector....say what..?

@rbrought 2 месяца назад

Dang the laser welder starts at $33,000.00. That is a bit too far out of my price range.

@jms932 16 дней назад

Hi, I've got a 1500w laser also welder and I'd like to know if in your experience this safety specs for security glasses would be ok. ->【PROTECTION WAVE LEngth】: IPL 200-460nm & 800-2000nm broad spectrum protection，optical density(OD) 5+,30% visible light transmission, anti UV/blue light And Infrared laser light .

@Bksmith03 2 месяца назад

I want one…. lol.

@xkj-286-86ho 2 месяца назад

🪬YeAHhHHhhhHhHhhHhHHHH!!!!!!!

@ManVsOven 2 месяца назад

frickin' laser beams??? count me in

@Welddotcom 2 месяца назад

Lasers man!!!!

@combatclifton 2 месяца назад

Needs hard prove of the strength testing

@dhamre 2 месяца назад

I have two of these and a full lab. All procedures qualified to ASME IX. Pass tensiles and bends every time

@richardhollis2530 2 месяца назад

How much!?

@GarageBoundLLC 2 месяца назад

Under 50k

@rbrought 2 месяца назад

They start at 33K for the one shown (plus accessories). Lol, just pocket change for some.

@beachboardfan9544 2 месяца назад

Cant wait till these dont cost 40k!

@Welddotcom 2 месяца назад

You and me both!

@eitkoml Месяц назад

If someone can be trained to do laser welding in 10 minutes then anything that can be laser welded will not pay well. The labor will be cheap if it takes less time to learn laser welding than it takes to learn how to use a cash register.

@mikstratok Месяц назад

true, I'd also expect more designs to favor laser welding whenever possible. But the reality is that laser guns are so bulky that there's enough work for the other processes out there. I'm designing a 2 person side by side tandem e-assist trycicle, spent weeks changing the design to make most welds laser weldable, even via robotic welding with special turn tables if possible, but I could only get 2/3 there, at least 1/3 of the welds will have to be TIG welded