I had an issue with my Canon IR1022A with it getting paper jams with print jobs more than 1 page. I can clear the paper jam error by physically removing the paper jam. Today I cleaned the pickup rollers and feeding rollers using MG Chemicals Rubber Renue. The rollers were certainly dirty. But when I tried to print it would give just error 'Paper Jam' with there being no physical paper jam. But if I use the side manual feeder it prints perfectly. I do not know how to get the error code in service mode. Do you have any suggestions please?
BD detection PCB failure - The BD detection PCB is faulty. Remedy: - Check the connector of the BD detection PCB. - Replace the laser scanner unit. - Replace the DC controller PCB.