Canon R6 Mark II - How To Expose Clog 3

Подписаться 34 тыс.

Просмотров 23 тыс.

50% 1

How to properly expose Clog 3 on the Canon EOS R6 II.
Head to squarespace.com/joshsattin to save 10% off your first purchase of a website or domain using code "joshsattin"
Gray Card - geni.us/7M2nA
Canon R6 Mark II - geni.us/guc3v
RELATED VIDEOS:
Exposing & Grading Clog 3 - • How to Expose & Color ...
Book a consulting/coaching call here - superpeer.com/joshsattin
Twitter @jsattin - / jsattin
Instagram @josh.sattin - / josh.sattin
Website - www.joshsattin.com/
CAMERA GEAR:
Sony FX3 - geni.us/OzfFsow
Sony A7IV - geni.us/5XRgFkA
Sony ZV-E10 - geni.us/oAP9yK
Sony 24-70 GM II - geni.us/Gm3jwR
Sony 35 1.8 - geni.us/45K1agj
Canon R6 Mark II - geni.us/guc3v
Canon RF 15-35 2.8 - geni.us/IO46It
Canon RF 24-70 2.8 - geni.us/TtRw
Canon RF 100-500 4.5-7.1 - geni.us/XRyA7Tl
AUDIO GEAR:
Sennheiser MKH50 - geni.us/ukZjif
Tascam XLR Unit - geni.us/IdIKtkB
Rode Videomic Pro Plus - geni.us/zrg4N0
Sennheiser AVX MKE2 Wireless Mic - geni.us/KtpofQK
Rode NTG5 - geni.us/Yi7A5S
OTHER GEAR:
Compagnon Element Backpack - geni.us/SPQI
NiSi Tru Color Variable ND Filter - geni.us/hvFBj
Prograde V90 256GB SD Cards - geni.us/2n7XYa
Angelbird CFExpress B 512GB Card - geni.us/TDSMH
Sony CFExpress A Card - geni.us/lSlStBF
Aputure 120D II - geni.us/mAskT6T
Aputure Light Dome II - geni.us/CjHV
Aputure Light Dome Mini II - geni.us/70sFQBq
DJI Mavic Air 2S - geni.us/4BsywSF
Sachtler Flowtech 75 Tripod - geni.us/Ey3Bh
Sirui ST-124 Tripod - geni.us/Ftt8oc
Gray Card - geni.us/7M2nA
Color Checker - geni.us/NQP8Aj
SUPPORT THE CHANNEL:
If you wish to support the channel monetarily, you can use PayPal here:
paypal.me/joshsattin
This is appreciated, but unnecessary, and no content will ever be behind a paywall.
TABLE OF CONTENTS:
0:00 - Intro
0:53 - Ways to Measure Exposure
1:52 - What Is Proper Exposure?
2:25 - False Color
5:14 - Zebras
6:51 - Showing Exposure in the Editor
8:05 - Different Results
8:21 - Sponsor
9:12 - Test & Recommendations
10:43 - How to Overexpose
11:16 - Overall Recommendations
11:48 - More Exposure Tips
12:49 - Wrapping It Up
This description includes Amazon affiliate links, which earn a commission to help support my channel at no additional cost to you. I only share products and services that I actually use and believe in.
#canon #videography #filmmaking

Развлечения

Опубликовано:

5 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 80

@photos-fera7392 12 дней назад

I rarely comment on any video. This was worth me telling you it was an incredibly informative piece! Thank you!!

@Josh_Sattin 9 дней назад

You are very welcome! Glad the video was helpful for you. Thanks for watching!

@JakobSagatowski Год назад

Hey Josh! I just wanted to let you know that your channel has helped me TREMENDOUSLY! I have a Canon R6 Mark II, and have recently put a lot of work into not just the actual content of my RU-vid videos, but also putting some effort into the production quality. Your guides about the Canon R6 Mark II has helped me a lot to achieve this goal. Keep pushing out videos like this, I'm watching every single one of them! Cheers!

@Josh_Sattin Год назад

That is so great to hear! I'm so glad the videos have been helpful for you and that your production has gotten better. Means a lot to hear that. Thanks for the support!

@tptrsn Год назад

Another great one Josh, thanks!

@Josh_Sattin Год назад

You're welcome. Thanks for watching!

@FrankSilverado Год назад

Great video. I'm justing getting into shooting Clog3 on my Canon R6 ii, so I appreciate any videos on this topic. Thanks!

@Josh_Sattin Год назад

You're welcome. Thanks for watching!

@Kaizenoriginal Год назад

Thanks for a great video! Straight to it and really pro work :)

@Josh_Sattin Год назад

You're welcome. Thanks for watching!

@SalahadeenBetts Год назад

very helpful video!! thank you

@Josh_Sattin Год назад

You're welcome. Thanks for watching!

@alvarosalguero3651 Год назад

Thank you so much for your video.

@Josh_Sattin Год назад

You are very welcome. Thanks for watching!

@ST-fl5fy 12 дней назад

Would love to see a comparison with z6iii. Great video

@martincollas Год назад

So great! Can you please recommend an ND Filter Set for the R6M2 fpr me?

@corlissmedia2.0 3 месяца назад

super helpful, thank you.

@Josh_Sattin 3 месяца назад

You're welcome. Thanks for watching!

@TylerEdwards Год назад

Great video Josh! Looks like 1 stop over is the sweet spot.it is so awesome that canon put false color on the camera. I hope that’s the new norm

@Josh_Sattin Год назад

I hope so too Tyler!

@samirachiko 11 месяцев назад

Amazing videos!!

@Josh_Sattin 11 месяцев назад

Thank you!

@paulomateus3083 Год назад

Thanks Josh, your channel is great! Did you test lowering the iso to 200 for example in clog3 to see how much the noise lowers? I know you will lose probably 1 stop of dynamic range but in a less challenging shot, light wise, might worth the trade off.

@Josh_Sattin Год назад

Thanks! Lowering the ISO does something different than overexposing. It shifts stops of dynamic range to the shadows whereas overexposing maintains the normal distribution of dynamic range. If you'd like to learn more about how changing the ISO works, check out this video: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-AWzqLE64TzI.html

@wanamirstudios Месяц назад

Hey Josh! I really like your explanation about Canon camera. but there is one question playing in my mind. Does Canon R6 mark ii Native ISO?

@omagaquefez Год назад

Hi Josh! I already saved this video, it will be very useful for my R6 2. Which card do you recommend to use the maximum video quality?

@Josh_Sattin Год назад

Nice! These are the SD cards that I use: geni.us/2n7XYa

@JonnyRay82 9 месяцев назад

Fantastic advice. Thank you! I just picked up the R6 Mk II last night to pair with my R5 and was pleasantly surprised to see false color built in. I wish Canon made a firmware update to include it with the R5.

@Josh_Sattin 9 месяцев назад

You're welcome. Yeah I wish every camera had false color!

@drbeardo6960 Год назад

Thanks a lot Josh Which one you enjoy more: R6M2 vs A7IV.?

@Josh_Sattin Год назад

You're welcome. I like them both for different things. Here is my comparison: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-0OfUBOtj_NM.html

@tekguyphoto Год назад

If you turn on anti flicker you can set to 1/50 and still use 1/2 stop increments for exposure but also impacts the aperture. Otherwise if you set it to 1/2 and no anti flicker you cant shoot 1/50.

@BobbyD262 Год назад

Awesome video, thanks. Question. Are you seeing ugly noise in 1080p with Clog3? I guess especially with high frame rates over 60p? On my OG R6, the noise looks horrible at most ISOs with 1080p and clog3. Looks much worse that Clog3 looks on any other canon Camera i have (C70, C200 etc). Overexposing doesn't help. And if 1080p still looks bad, did they remove Clog1?

@Josh_Sattin Год назад

You're welcome. I haven't done too much testing in 1080p besides the higher frame rates, which I found to not be so good: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-mxqE64aKzqI.html Yes, Clog (1) is not in the R6 II.

@tekguyphoto Год назад

Morning. Any chance you can test the official 33/64 cinema gamut to 709 canon Lut. I find it adds noise when over exposed by 1 stop. I actually found a Sony official lut that does much better with noise. I just need to add just a bit more color in camera. Sometimes I add my lut using ffmpeg during re encode so no need for davinci for quick turn around.

@Josh_Sattin Год назад

I generally don't use LUTs, especially the Canon ones. Every Canon camera looks different (which is very annoying to say the least) so using a generic Clog3 LUT doesn't work very well.

@artmktadvertising Год назад

Hey Boss, do you have some problem using gamut cinema with Ninja V? or some weird sky tones? congrats on your helpful videos ...

@Josh_Sattin Год назад

Thanks! What sort of issue are you having? Are you just monitoring with the Ninja V or recording to it? I always record internally in the camera.

@artmktadvertising Год назад

@Josh Sattin thank you for your answer. Actually, I use ninja V to record in 422 because I record a 30 min program and soo much better to edit also I use 2T ssd .. but I had a problem with having a good skin tone.. i heard something about using gamut cinema with R5 and R6 is a problem with nija V... then im using WIDE DR 709. But, im not sure about that.. maybe it was my problem setting the camera and ninja... again thank you for your attention. let me know your configuration in Ninja with log3..

@BarefootMediaTV 10 месяцев назад

Random question but im curious if anyone else is having the same issues... I shoot sony with slgo3 and have a monitoring lut on my external monitor. Everything works great. At work we have 2 canon r6 mark.ii bodies and when i shoot clog3 with a monitoring lut, the image is very far off. Both with exposure and colors. When i film something then use that exact same lut on my computer the image looks great (if i manage to get the exposure right). So where is the mess up coming from going to the external monitor? i have tried with my atomos shinobi, osee t7 and smallhd monitors and all 3 fail to show the proper image when adding the monitoring lut. shooting with no picture profile the image looks accurate.

@Josh_Sattin 10 месяцев назад

Interesting situation. This might have to do with the gamut (Rec 709, Rec 2020, Cinema Gamut) in the R6II. I'm not sure about this combo of camera and monitors, but with the R5 and Ninja it doesn't accurately show the color gamut that is in the camera.

@filmmar-studiofilmowe Год назад

Thanks for the information :). Please make a video on how to connect Canon R6 mark II to Atomos Ninja V

@Josh_Sattin Год назад

You're welcome. I go over that in my full R6II settings guide. You can find it around 15:50: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-2xqub_NF14Q.html

@filmmar-studiofilmowe Год назад

@@Josh_Sattin Thanks a lot.

@MillerMatthews Год назад

Great video! What are your thoughts on using Clog3 in environments where you can't control the lighting? (like a concert). Even at low apertures often there is not enough light to even expose at 0, let alone +1 stops over. Is it better to just not use Clog3 and crank the ISO? Or boost the native ISO past 800 and stay in Clog3?

@Josh_Sattin Год назад

I pretty much always shoot in a log profile. Your sensor can only capture the light that it is given. Getting a faster lens (lower F) will help. The R6II has an informal second base ISO of 3200 so you can try that too, but it's all about light getting to the sensor, independent of which profile you are shooting in.

@MillerMatthews Год назад

@@Josh_Sattin Interesting. Would love to see some tests on the 3200 ISO in CLOG3, curious to see how it compare.

@Josh_Sattin Год назад

Although I didn't experiment with overexposure, here are some results for higher ISOs: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-MMNuboq6QUY.html

@getmarked 9 месяцев назад

@@Josh_Sattin dont tell anyone but you can actually push exposure to the right just fine with ISO, darken it in post and u get very clean image. ISO is not the source of noise.. thats well known already.. If you shoot darkscene lets say on 3200 iso and the same scene with 12600 ISO but darken it in post 2 stops.. the 12600 ISO footage will be much much cleaner.

@mjingj Год назад

Exposing with ND and lighting is the start and fine if you’re not moving around, but I find having a floating ISO is best, and having less to worry about. Set exposure comp to +X and be on your merry way while the camera floats the ISO. This doesn’t work well on Sonys like the A7S3, but works well on the A7IV and A1.

@Josh_Sattin Год назад

If you are happy with the image you are getting then that's great. Raising your ISO above the base will reduce dynamic range and increase noise. I set everything how I want (ISO, shutter, aperture) and then use a variable ND filter to adjust the exposure. I have been using this method for years shooting outside and run and gun style stuff.

@mjingj Год назад

@Josh Sattin definitely I am more thinking in in doors and and night at as well situations where it will already be base iso or you may want to remove the vnd filter

@NOBODY-oq1xr Год назад

now i have a question about that, if you shoot outside and lets say you are filming your dog and he runs around and you keep the camera on the dog and he goes from a shadowy spot to a spot where the sun is shining upon you cant at all compensate for that on the fly if you dont use ISO right ? i mean if you use a filter wouldnt you need to screw it on / off everytime the light situation changes ? Sorry if thats a stupid question im pretty new to filming with my R6 II

@shawnwright240 Год назад

Do you have a certain ND filter you suggest for screwing on front of lens or do you like the ND adapter on back of lens. Great video as always.

@Josh_Sattin Год назад

I pretty much use this for everything now: geni.us/hvFBj

@shawnwright240 Год назад

@@Josh_Sattin Thank you sir.

@Josh_Sattin Год назад

@@shawnwright240 You're welcome!

@simonbrazier6204 Год назад

If I have recorded a video on the R6 mark ii with C.LOG.3 on, can I recover the greyed-out video?

@Josh_Sattin Год назад

Yes, it needs to be color graded. Please check out this video to see my process: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-JCDaz1Ewirg.html

@chrischadwick1 11 месяцев назад

Hi Josh, run and gun scenarios where LOG is not practical can the R6 mk 2 shoot in 10 bit colour in one of the standard picture profiles?

@Josh_Sattin 11 месяцев назад

Only in HDR PQ. See page 8: downloads.canon.com/nw/camera/products/eos/r6-markii/R6-MarkII-SpecSheet.pdf

@chrischadwick1 11 месяцев назад

@@Josh_Sattin ah link dosnt work. So is 10 bit colour only in LOG?

@photos-fera7392 12 дней назад

@@Josh_SattinHDQ PQ is what I shoot all my real estate videos at. Good midpoint between standard and LOG. I love it and it’s 10 but fit added flexibility.

@MattRamseyTube Год назад

Nice! But now: best noise result to correct overexposure in post, or drop below 800 ISO back to the correct exposure… 🤔 probs similar, but I wonder.

@Josh_Sattin Год назад

Thanks. I am a bit confused by your comment. You usually want to keep your ISO at 800 and grade the image to what you want. The point of overexposing is to raise the shadow detail above the noise floor so that when you correct the image, the noise gets buried. Of course you don't get anything for free because you might be clipping highlights if there is a lot of dynamic range in the shot.

@MattRamseyTube Год назад

@@Josh_Sattin yeah very poorly worded, sorry! I usually find if I overexpose with more light and drop below 800 to the correct exposure, I get about the same result: lower noise floor with a little less headroom in the highlights. Might be worth trying? Thanks for answering, Josh!

@Josh_Sattin Год назад

Ah then you aren't really overexposing then, you are just shifting stops of dynamic range to the shadows. This can have a similar effect in some situations. This can also be a useful technique in a scene without bright highlights. You can also raise your ISO above the base when shooting a scene without any strong shadows. I made a video about this: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-AWzqLE64TzI.html

@MattRamseyTube Год назад

@@Josh_Sattin yeah, exactly the technique you showed in an older video. I think it’s functionally similar, just one done in the camera and the other in the computer.

@Josh_Sattin Год назад

In some situations this will give a similar result. But when you change the ISO it has a different result. It shifts stops of dynamic range whereas overexposing maintains the most balanced image in terms of dynamic range.

@rMr.big13 Год назад

So no need to over expose for clog3 like in Sony slog3….correct?

@Josh_Sattin Год назад

I explain this in the video.

@mauricioli3901 Год назад

Great video amigo, 1 stop overexposure I think will be a sweet spot. Thank you again for sharing. 👍🏻☀️🌴🌊🌋🏝📸☕

@Josh_Sattin Год назад

You're welcome. Thanks for watching!

@thomas.kovacik Год назад

the r6 mark 2 has false color?? whaaaaaat that’s sick

@Josh_Sattin Год назад

Yeah man! It was definitely surprising that Canon tossed that in there. Of course the quirk with having to turn view assist off is silly, but yeah, false color.

@DroneStories Год назад

It is extremely difficult to have correct exposure in an outdoor environment where the lighting conditions change quickly. At the same time, the profile log is "deified", ignoring that only very advanced users can handle it properly. And we come to the most interesting: What other profiles do companies have on their cameras, and how reliable are they for the average user? The only thing for sure: Canon is the ONLY COMPANY WHOSE "NORMAL" profiles HAVE 8 bits !!!! In 2023!!! And they ask for 3000 euros!!!!(Canon r6 ii)

@Josh_Sattin Год назад

Videography and flimmaking take a lot of practice and many repetitions to get better at it, regardless of what color profile you are shooting in. This goes for learning any skill really. As videographers and filmmakers, we should always try to get the most out of our cameras and shooting in a log profile will give us the most dynamic range and result in a higher quality image. In fact, exposing with log in an outdoor environment is actually easier because you have more dynamic range to work with, easier to keep your highlights from clipping and shadows from crushing. If you are recording in a non log profile, you will be more limited in your dynamic range and more likely to lose information in the highlights or shadows. Grading log footage is really not very difficult and many people find a LUT or two that will do the basic conversion for them. But, doing a basic conversion is actually pretty simple. As mentioned in this video, I made a simple guide to do this without a LUT: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-JCDaz1Ewirg.html As far as Canon's decisions about 8-bit vs 10-bit in their standard profiles, yeah that's not cool.

@DroneStories Год назад

@Josh Sattin I agree with everything you say!! Logs, profiles, need a lot of experience. Even professionals can "see" so much noise in their shots, from incorrect exposure. But what about the "ordinary" users? How big and noticeable is the difference in dynamic range?? THIS IS WHY IT IS IMPORTANT TO HAVE GOOD "normal" profiles, ALWAYS 10bit, like fuji, like Panasonic, like Sony (=s cinetone). Canon???

@Josh_Sattin Год назад

I don't think shooting in log needs a lot of practice to get going. Once you can correct a basic image it gets easier. You just need to learn some basic grading skills. Go out and get some shots and practice a bit. In terms of dynamic range, it varies based on the camera and profile, but you usually lose quite a bit of dynamic range. One of the reason's why Sony's S-Cinetone is so popular is because it is a bit flatter than their standard profiles. Kind of in between log and standard. I am not here to justify any camera manufacturer's decisions. We are lucky to have so many options and such powerful cameras. If you can get an image out of a camera in a standard profile that you are happy with, then that's fine too. I can only speak for myself here, but when I switched to filming in log a few years ago it made a big difference in the quality of my work. But that being said, we all should be constantly trying to get better at our craft. There is almost infinite content on RU-vid to help us all level up together.