This is the most detailed video about petrol car engine oil changing and oil filter changing.This video is useful for all the car owners out there especially the one who owns WagonR,Alto K10,Zen estilo,celerio, cause these all vehicles are powered with a 1ltr K Series engine.
in this video we also include engine oil grades, contents in engine oil, specifications of engine oils, etc.
Engine oils clean, cool and protects your engine. They ensure that your engine is properly lubricated and allow the pistons to slide smoothly in the engine cylinders hundreds of times per second. Engine oils also continuously releases impurities contained in the engine circuit. However, it is extremely important to check your engine oil levels regularly, so that you can top it up whenever neededIt is essential to change the engine oil according to the dates or mileage indicated by the automotive manufacturer or your mechanic. Otherwise, the engine may clog or get damaged sooner, its performance will no longer be optimum, and the vehicle will waste fuel.If you're unsure what kind of oil you should use or how often you should change it, refer to the technical specifications or service section of your owner's manual.
Tools required
1)Wrench/box end to remove drain plug
2)Oil filter wrench(If it is too tight too remove the filter..or else uses your own hands or any methods like using rubber band)
3)Oil drain pan/Any container
4)Funnel
5)Latex gloves(if you want)
6)Jack and jack stands or ramps/bricks (optional, depends on ground clearance)
Items needed
1)Oil
2)Oil filter
First, you'll want to lift the car high enough to give yourself room to work under it. Whether you use ramps, or jack stands, make sure you are being absolutely safe. Never work under a car that is held up only by a floor jack.Your engine and its oil should be warm when you get started, but not hot.Remove the oil filler cap.If yod don't remove it the ,oil would still drain with the oil filler cap on, but it does seem to flow out more smoothly and quickly with the cap removed.Place the drain pan or container under the oil pan.Remove the drain plug(nut).The oil will start pouring out.Allow it to drain until the flow of oil has slowed to a trickle.Using your hand or oil filter Wrench remove the oil filter .Allow it to drain.Its goods to wipe down any oil covered surfaces before you replace the drain plug and oil filter.
Replace the drain plug and tight but not too much.Next take your new oil filter.Before screwing the new oil filter into place,It's also a good idea to rub a light coating of oil around the filter's gasket before screwing it into place, as this helps to ensure a good seal and make it easy to off the next time of oil change.After you reconfirm that the oil drain bolt and filter are both in place and properly tightened, it's time to add oil. Add the required amount of oil.Hold the bottle on its sides for a smooth pour.Replace the oil cap and start the engine. Run the engine for some seconds or so to circulate the new oil, then shut it down and check your work area underneath the car for leaks.Lower the car off.When the car is on level ground check the oil level and top up it if needed.
To know more about the engine oil and oil filter do watch till the end.
❤️ Castrol Engine oils ❤️
Queries solved-
engine oils
engine oils for cars
engine oil grades
engine oil type
engine oil viscosity
engine oil changing interval
engine oil changing time
engine oil changing in cars
engine oil price
synthetic engine oils
non synthetic engine oils
best engine oil for car
how to change engine oil easily
How to change engine oil filter
How to fill engine oil in a car
Castrol engine oil
20w50 engine oil
Petrol engine oil
Diesel engine oil
what is SAE
Engine life solutions
engine oil changing at home
How to save money 💰
save your money 💰
Automobile Educational videos by Queen on wheels
fot paid collaborations - queenonwheelscompany@gmail.com
#tipsandtricks #automotive #car #engineering #oilchange
30 июл 2021
