Carb Cleaning 25cc Blower 

Thanks for sharing.

👍

Cool. good luck.

Joe Korpiewski headed to the shop to spray break cleaner in the carb. Better work

Probably no end of season garden video. Most of the stuff is starting to die off. Getting ready to clean it up soon. Thanks for watching.

Thanks.

You're welcome!

👍

exactly my thoughts.........no tool I have will fit in that needle adjust area, so Dremel is the only answer w/o buying a special tool

Thanks for watching.

You're welcome. Thanks for watching.

YW

Glad it helped.

You're welcome.

Thanks for the tips.

WHAT IF YOU REPLACED THE FUEL LINES BOTH ARE THE SAME , DO THE FILTER ONE GO ON THE TOP / RETURN LINE GO ON THE BOTTOM OF THE CARB

👍

Thanks for watching and commenting.

Good tip. Thanks for watching.

Vdubin64 Thanks. I have the blower attachment for my cub cadet string trimmer that I use. Sounds like your new blower is nice. I like Stihl. I have the FS90R string trimmer. It's a beast. I'll have to check out some of your videos.

👍

Not sure

Yeah. I have to put new scags on my skis for this season. I'll do it probably in a month f t on now. Thanks for watching.

Thanks

Good luck and thanks for watching.

Right on peace out have a good weekend

Roy G small line is gas pick up

No. I didn't need the blower and never got the tool so I haven't looked at it since I made this video. This could also be a sign that it is starving for fuel. Check for cracks in the fuel lines at the gas tank.

I had the same issue. There are tiny orifices and venturis that a cursory topical spray of carb fluid won’t clear. I dissembled the carb completely and soaked it in line sol overnight. Rinsed everything in water and seafoam lubed for assembly. Put it back together and it runs like a top. Why pine sol you ask? An old mechanic taught me carb cleaner is too harsh for soaking. The bodies of the carburetors are a casting and dipped in a coating to seal the porosity. Extended exposure of the coating to carb cleaner drips this thin film off. When the coating is gone tiny amounts of air work into the mixture. This makes things lean, in some cases too lean. That’s why the need for extra choke/richness. Try the pine sol... I now swear by it for all my carbs that have sat too long. Hope this helps!

Nice hack!

Sorry, don't remember

Yeah. Probably a good idea.

Don't have it anymore

Very late, but probably that it's getting less and less fuel, needing constant adjustment. Most likely clean the carb and fuel filter, and maybe replace the fuel lines

No. It's a 1980 Suzuki RM 60

Thanks. Glad you liked it.

A one-year-old blower shouldn't have any problems, but these days they do. You may need to buy a carb kit and rebuild the carb. I have another video rebuilding a leaf blower carb. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-eogV7DwPTns.html check it out.

Thanks! I will try it tomorrow. I did get my weed eater to work!

Sorry again. To long ago to remember.

Sounds good.

@@Paisteboy okay! Where are you from? I am in Ohio.

That is a possibility. Thanks for the comment and for watching.

I believe there is there is a tool for that.

Sorry. Not sure.

dragon124356 I kind of hinted that it may not be good for the gaskets, but gave them a little shot anyway. Hope I didn't damage them too much. I probably should just get a new carb kit for it anyway. Thanks for your comment and info about the tool.

oh ok i see now but no problem

Vdubin64 Nice.

u set ur torch

I doubt the manufacturer sells one screw so I would suggest taking the a matching screw to a place like Fastenall that sells just screws and fasteners. They may be able to match it up for you.

👍

That sounds like a possibility. I'm not a mechanic so I can't say with confidence what the true cause is. I usually start with a cleaning and go from there.

HarryCo4 How do you mean?

paisteboy Here is a photo: drive.google.com/file/d/0B2QfCEBctnYpQU1tdjFXbHlwSW8/edit?usp=sharing

Ok. Thanks.

paisteboy Just turn the low screw out a bit when its on full throttle and it should run good!

Ok. Cool, thanks. I'll do that.

Sorry, I don't remember. It was my brother's blower and he hasn't had it for years.

I hear what you are saying and I don't have all of the answers. I'm not even a small engine mechanic. I do know that some of these machines have a carburetor problem right from the factory and cleaning and rebuilding only help temporarily. I have a weed eater that my brother just gave me and it's having problems that a shop said wasn't worth fixing and the machine is only a couple of years old.

I do.

Not sure. My brother ordered them online.

Hey can you find out for me please thanks a lot peace out happy easter

Thanks for the tip

Good luck

You could but I wouldn't recommend it. It can leave residue on the parts and is hard on rubber.

Disagree... carb cleaner is much more agressive. I would not have sprayed the metering or pump diaphrams. And does BRAKE CLEANER leave a residue on rotors and drums? I don't think so. A carb rebuild kit under $10 could be had from eBay.

I think it is a craftsman.

Sorry. Not sure.

Parts of your sentence do not make sense. What does this even have to do with foam? There is no foam in a carburetor.

Lawn mower dealer will have it.

No. Sorry.

Craftman Blower 25cc Carburator www.searspartsdirect.com/product/431tc01p4b-0071-358/id-530071775 How to replace carburator www.searspartsdirect.com/diy/repair-guide/how-to-replace-a-leaf-blower-carburetor How to rebuild carburator www.searspartsdirect.com/diy/repair-guide/how-to-rebuild-a-leaf-blower-carburetor

Thanks. I'll look into that.

😂

Only on Sunday!

at the end of spark plug wire

From the experience with mine the filter line goes on lower line on carburetor.

See below. Can't remember. it was too long ago. Sorry.

Thanks!

Check out my other bower carb rebuild video. It might help. we remover the carburetor from the blower on that video. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-eogV7DwPTns.html

Lol. Thanks for watching.

Absolutely wish more content creators would reply to comments. U now habe a new subscriber. Thanks

@@HuckBuddies Thank you. I really try my best to reply to all comments.

👍

Thanks for the comment.

seadooman o do you think maybe that’s why his gloves got all blown out of shape😂😂😂😂

I now known that.

That's close to Paisteboy.

@@Paisteboy my name is Plaisted. Where are you from? I am in Ohio.

Yup.