case 580sk backhoe fluids 

No problem

did you get all info what you asked i hope so.

Although it has its moments, I really like it. Thanks Dalton 👍

Thanks, no problem 👍

Thanks, I'll see if I can do one someday.

Thanks Larry 👍

No problem 👍

I can't say for sure. Some say sk was turbo but mine is not turbo. I'd say mostly some changes in control layout and possibly a different transmission

No problem. I just check it cold, off. Not sure if there is a spec on how but its just a transaxle on here kinda like a 806 farmall or similar tractor. Thanks 👍

Ok thanks. Reason I'm confused on mine. It's a 1982 580D. Dipstick is the same as yours. Is when I check it cold with eng off, it is wayyyy over full. When I warm it up than check it, it's not even on the dip stick? I do not have a manual or any stickers telling u how to properly check Trans level

Appreciate your time for the answers. There are not many videos about this stuff 🙂

@@aaronmueller8602 I am not for sure but it is possible that is slinging the oil around to different areas of the trans and it appears low. Possibly a case construction dealer could find the correct procedure. Good luck 👍 No problem 👍

Yes they are separate, I would check each.

On the 580sk, there is a plug on the bottom of the right frame rail. I recorded a video about changing the hose on the pump but haven't got it edited yet 😪

This one is na, I would love to add a turbo some day. 👍

@@AndyFromm 👍

@@broo_shs it needs more power!

@@AndyFromm how much you think that needs more power because many ask in machine shops if they would get a good deal and its only need to drill cylinders little bigger and messure all and order new piston and set ring cap to right size, and that will bring little more power and another way its to find right cylinder head to that engine what already have drilled bigger and then just buy right size pistons and ring cap it right size and set it up.

@@broo_shs it is probably around 50 hp right now, you don't have to do all that work on here. as long as it is in good working order, just install a turbo and add some more fuel. I would be happy with 80-100hp. That should be quite doable since my M has the same engine but has a turbo. It make around 100-120hp.