Caspian Sea Monster by Metal Time: assembly assistance
Let's begin assembling together!
00:04 Carefully remove the part from the plate
00:45 Use a file to remove burrs in the places where the part is attached to the plate
01:01 Step 1. Installing elevator levers
07:47 Step 2. Assembling the horizontal stabilizer, installing the elevators
19:14 Step 3. Assembling the tail turbine
39:39 Step 4. Assembling the vertical stabilizer, installing tail turbines
46:11 Step 5. Assembling the tail unit
51:43 Step 6. Installing the rudder lever
53:51 Step 7. Installation of the deck and bow
01:03:18 Step 8. Installing the deck into the fuselage
01:11:23 Step 9. Installing the front bulkheads
01:17:23 Step 10 Installation of middle bulkheads
01:25:09 Step 11 Installing rear bulkheads
01:30:58 Step 12. Assembling wing part 1
01:39:35 Step 13. Wing assembly, part 1
01:51:03 Step 14. Assembling the ailerons
02:00:14 Step 15. Installing the wings
02:03:43 Step 16 Setting the aileron thrust
02:05:29 Step 17. Assembling the cabin
02:16:26 Step 18. Assembling the bow turbine
02:34:07 Step 19 Installing bow turbines on the cockpit
02:38:47 Step 20 Installing the cabin
02:40:55 Step 21. Installation of the tail unit
02:43:00 Step 22 Installing the rudder
02:50:22 Step 23 Installing the lower fuselage parts
02:55:22 Step 24. Assembling the stand for the model
02:58:33 Step 25 Installing the model on the stand
02:59:27 To move the ailerons, elevators and rudder, move the levers
Thank you for assembling with us!
16 ноя 2023
