This feedback has definitely been mentioned a few times and is noted for future videos! I thought it would be helpful to hear how loud the steel is compared to hitting the dirt / weapon report in lieu of “accurate audio recording” but have a new idea for next video :)
CAT has knocked it out of the park. One note, the MOB doesn’t use Surge Bypass, it uses their Di-Verge technology. Iove my 718 WB and my Ti ODB. Getting RC2 or better muzzle suppression while getting Velos levels of backpressure reduction is awesome. I tested them and my CGS SCI SIX on my 12.5 midgas with H3 buffer, Sprinco blue spring and riflespeed adjustable gas block to see where I get lock back. Unsuppressed is setting 10, SCI SIX is setting 4, WB is setting 7 and ODB is setting 9. And the ODB is phenomenal on my 8in 300blk. Though I did have to drill out my gas port on it to cycle subs because it has such a high flow rate. The MOB Will be my next can which I’m going to build out a CMMG Radial delayed blowback banshee for.
I did clarify that in the caption, my fault for not double checking on the MOB. I tried out the Mob on a CMMG upper kit and it was extremely quiet, much quieter than my APC9k! Very cool setup. I just test fired my personal 718 WB, very excited about this company !
I have the mobster as well. I don’t even have a pcc yet 😆, with that pew science data blowing all the other 9mm cans away I had to get one. What would you recommend for a host? Thanks
Something roller delayed (MP5) or radial delayed (CMMG see my latest short) for maximum quiet. I love the apc9k for practically but it’s pretty loud in comparison due to the port pop.
@@AimAllies I’d like to get the sig Mpx k, but I’d have to get a ilwt barrel. I’d rather do that than use an adapter with the factory barrel due to the thread pattern. I’ve heard the sig doesn’t like aftermarket stuff and opens groups up pretty wide which makes me nervous. I’m looking at the Cmmg dissent too. Can’t decide which one to get..
@@corruption2.066 MPX's are louder than the suggested alternatives since the gas system vents right above the chamber. Something to keep in mind if you want to make the most out of your Mob
Not too crazy about K cans personally. I ran my Rugged Obsidian in K configuration for a few rounds and immediately put the end module back on it was so loud to me…