Hi, nice review sir. Yes the CV tec clutches are made up here in Canada. 🇨🇦 You can rest assured that they are top notch. They make cv clutches for all kinds of vehicles including snowmobiles. As mentioned the yellow lock button is for your front differential. You will probably find the steering is heavy when it’s locked on dryer ground.
I really love the blue color cfmoto have on some of their models. In USA you have 500 and in Europe we have 520. I bought my 520 back in 2018 and I can't complain how good it is, and now during winter I use it for snowplowing my driveway.
Just like the one I bought last year my first ATV ever at 45 , Looked at Hondas Polaris , I don't like buying things from China but as you have said every thing is made in China , even harleys , I owned three Harleys , I agree about this cfmoto I pulled many stumps small ones as well have towed a trailer with said logs at my fathers and my land . It's a beast , I'm up north have a plow on it as well it's a beast when plowing. Love mine .
Time will tell dont have a lot of miles on mine but so fare so good Im a novice with ATVS my first at 45 have used it a lot to haul logs at my father and mine land I dont abuse mine or run it in water like a lot got a plow from Walmart does a great job up here in WNY .
“I do have a great point of reference for how much money I don’t have” 😂 priceless and so true! We can all wrap ourselves selves in the flag and preach “buy American!” but our roads are covered with non-American vehicles and our homes are filled with “made in China” That’s just how the world works when you are not a millionaire!
if your government keeps printing money like it's doing you will feel lucky to afford Chinese knockoff products in 10 years. especially as you manufacture less and less. maybe you should preach build american over buy american. or do what you want to do idgaf.
Nice review....but yellow button locks the front end. The rear is locked all the time. The CVT clutch is on the right side of the machine....not the left. The EBS stands for Engine Braking System. It's a one way bearing integrated into the primary clutch. Overall these are great quads. These are the only chinese made ATV's that rival the bigger name manufacturers. You'll find out how nice it is as you use it more and more.
Yup I agree bought one last year my first ATV at 45 blue as well , even though it's made in China still a great machine all ATVs are made in China even Harleys I owned three , I have pulled out stumps small ones towed a small trailer loaded with the logs , up at the land ,I'm up north used it to plow my drive way last winter it's a beast .
@@HomesteadBandwagon you might not be...but other people watching this might be considering purchasing one. Even tho these are Chinese made...they aren't free or even close to it. Some people will want to know how they are equipped and the details and location of said equipment. JMO is all.
Got the same four wheeler I love it you said the first 10% really can’t throttle it that much mine was like that for the first month and then it got worse the first 10% was like 20 mph and then got up to like 60
Hi Meika (eastern Europe?) I like to thank for the little info-clip and yes, I am considering to purchase the exactly same one in a bit more shady color if possible. Do I need it? Heck no, could I have some use for it? Yes I think so, stretching a fence line or pulling mesquite on the 20 acres or going hunting or whatever I am certain that once you have that nice machine, you're gonna use it here & there quite often . No, I do not have to buy one just because my neighbor (one mile east) purchased two of them, one Can-Am and one Polaris and no, I'm not going to spend 25K just for some toys and yes, I have made up my mind and, if I ever buy one, will go for the CF 500. Okay, that's enough for today, drive careful and good luck with your projects.
I have this same model and I can’t explain it but it feels like it should go faster and be less resistant feeling. Also I get worried that just after a few minutes of driving the temp symbol starts rising though it’s plenty of antifreeeze
@@HomesteadBandwagon Awesome, I have a 2019 800 and a 2021 600 and I haven’t had any issues at all. I use the 800 to pull trailers around the property. You get a lot of bang for your buck with CF Moto. Have fun friend.
Yea the original price for atv is 5600 but after they tack on the build fee and and charge for the warranty and taxes it comes out 8600 I didn't realize it till the end but still bought it and It's good running machine...
@@jbthebird6772 I have a 500 one in blue bought last year with a plow it's a beast , My first ATV at 45 great machine . The winch works great Have pulled many trees with it .
The transmissions are sourced from Canada, but from what I can tell it looks like the machines themselves are still made in Hangzhou, Zhejiang Province China. If the whole machine was made in the US or Canada, you know they'd be pasting stickers all over the machine saying so!
They used COPPER WASHERS AND THE DRIVE BELT IS ON THE RITE HAND SIDE AND HOW MUCH MORE OBVIOUS COULD THEY MAKE THE REAR STORAGE COMPARTMENT DOOR? And as far as the dif. Lock it LOCKS THE FRONT AXCEL so it turns as one. You definitely are new to making utube videos, so before you make any more, do your homework and make sure you know just what your talking about.
False, they are made in China! Chinese garbage, everyone is buying them thinking they are good, not so! The Chinese are some of the cheapest people on the planet, why would people think they are getting a quality machine for thousands of dollars less? This makes me laugh, although I feel bad for those that wasted their hard earned dollar! If you think otherwise, time will tell! A fool and his money are soon parted!!!