CHẾ CỘT PHÓNG ĐIỆN TESLA COIL Bằng Flyback Tivi | DIY 3,7 Volt Tesla Coil From Flyback Tivi 

ăn áo cho bạn cảm ơm ^^!

Ko comment đấy thì sao

Bn cho mk hỏi: nó có lm phát sáng bóng đèn ko á

Mua bo mạnh TV hộp cũ

Hoặc tự quấn, 4000 vòng dây 0.05mm lấy trong mấy biến áp đồng hồ tranh hoặc cuộn dây đồng hồ cơ

No, flyback only works on AC current. Thank you for watching, please subscribe to support me!

Hello !! Microwave transformers are stronger and more dangerous. You can use it to build a larger Tesla column. I recommend Flyback for small models as it is more secure. Good health and good luck, my friend!

For better result, use neon sign transformers.. they have like 15kv

@@Tran_Nam_Tuoc can you tell me what kind of a mosfet and resistor did you you use in your high voltage power supply

@@arjyabirhazra1135 a irfz44n with a 200 to 150 ohm resistor

Cảm ơn ban.

Cảm ơn bạn

Cảm ơn bạn, chúc bạn sức khỏe !

Thanks very much !!!

Tks !!!

Cảm ơn người anh em ❤

Vẫn được, hơi yếu thôi, nên xài 80n70(trong bo xe điện ve chai) hoặc irf 3205(trong UPS)

Mua hihi

@@Tran_Nam_Tuoc có con nào thay thế được ko

D718

D718 được mà yếu hơn, xài 80n70 trog bo xe điện ở ve chai, vừa rẻ vừa mạnh

Quá êm !!

Có giật ko bạn

Uhm

How should I connect it? At each end of the Spark gap?

@@m.faridcarrasco2181 No, the resistors are connected to each parallel pair of capacitor in an MMC bank.

Cảm ơn bạn !

Will the square battery be able to withstand the current? I think that's why he used lithium ion batteries

@@raj9624 It lasts approximately 2-3 minutes at its maximum power and then decreases

Tesla coiler here; The secondary coil of a Tesla coil should have more than 800turns, the primary winding depends on the resonating frequency of the secondary coil and the capacitor bank; And NO you cannot use a 9V battery to power a SGTC (Spark Gap Tesla Coil) because it can't provide enough current.

Chai Leiden

Thanks You !!!!

K giật. Nhưng nóng sẽ bỏng

@@SaritaAgrahari-z8c I think in this project, if the light bulb is kept on continuously, the components in the emitter will go to “hell” quickly.

Điện giật phê phê haha

Đó chỉ là chương trình phổ thông thôi

Ok bồ tèo

Thanks !!

Can u plz turn on another video

~4000 turns

I made a flyback driver using Arduino with 15Khz frequency and 5-12V... Arcs are coming at output of flyback transformer but when I connect it to Telsa coil it's not working as I expected Can you please help me out....

did u just connect the arduino directly to the flyback?

Relay wired to make a buzzer makes a short pulse. Most relays contacts will not last long There are better made relays to do this. There are things you can do to limit burning of the contacts like add a high value resistor across them it reduces arcing. There are many other ways to mechanically pulse DC or AC I am working on a Vertical vibrator that uses gravity and selenoid to lift the contact rod.

Yes, but it is ac, not dc

Được, nên xài IRF3205 cho mạnh

Mình có để trong video đó ạ

bro could you explain me how to select the capacitance please? thanks in advance!

@@meenakshiambigapathy9309 by calculating the resonance of the secondary coil then matching the matching the resonance with the primary coil. u can use LC oscillator formula.

Tienes que usar la web JAVATC para calcular la resonancia de los dos circuitos y luego jugar con las vueltas de la bobina primaria y el condensador para hacer que la frecuencia de resonancia del circuito primario sea exactamente la misma que la de bobina secundaria. La bobina de tesla es un transformador resonante ,si no está perfectamente afinado no funciona.

Tại vì Cường độ dòng điện I rất thấp, nó chỉ cao về hiệu điện thế V thôi

Không bạn nhé.

Se puede comprar por mercado libre o por alguna tienda que arregle televisores de tubo

El valo puede varear desde los 800 ars a 5000 ars

It seems you know about Tesla coils, I'm trying to replicate the same circuit from the video, but I have some doubts, please I would appreciate your help with some answers. Do you know what is the purpose of the spark gap?, Could I burn the flyback if I don't use spark gap and capacitors?, These low amperage rays produce high frequency electromagnetic waves, so they wouldn't be harmful to the body?

@@rafaelmunoz2772 As a Tesla coiler I'll be glad to answer your questions. If you're new in tesla coiling or you want to build a SGTC (Spark Gap Tesla Coil) you should know the basic fundamentals of how it works, you can find a great explanation on Wikipedia. SPARK GAP: The purpose of a spark gap in a SGTC is when the capacitors are fully charged or charged to desired threshold and the voltage is high enough, the spark gap breaks down, ionizing the air between the terminals and forming a short circuit. This allows current to flow between the primary capacitor and primary inductor, completing the primary circuit. Thus, it induces an electromagnetic field to the secondary coil and it turns it into high voltage high frequency discharge. There are several types of spark gaps, like "Rotatory Spark Gap", "Static Spark Gap" etc. No without the spark gap and capacitor bank it won't work; You should check Tesla's schematic of SGTC. No the EMF that a Tesla coil produces are safe and will not harm any human being but it can interfere or even destroy nearby electronics (applied to medium to big sized coils).

Không nha bạn

Màu mè hoa hẹ

Tê nhẹ thôi bạn, V cao nhưng I cực thấp