Change your bow's String and Cables! | So EASY it's STUPID!

Подписаться 58 тыс.

Просмотров 8 тыс.

50% 1

Like that Majesty Purple Vista 31 from Athens? Check out their full bow lineup and all the colors at www.athensarchery.com/
AJA Newsletter: mailchi.mp/f408676c38a9/avera...
AJA Decals and Tuning Cards: averagejackarchery.square.site
Clothing Merchandise: teespring.com/stores/average-...
Facebook: / averagejackarchery
Instagram: / averagejackarchery
Email: averagejackarchery@gmail.com
OnX Hunt: webmap.onxmaps.com/create-acc...
Huntworth Clothing: www.huntworthgear.com
Gear I Use!
Bows: Athens Vista 35, Elite Energy 35, Elite Victory, Elite Kure, Elite Rezult, 31" draw, 50-60 pounds
Optics: Maven C.1 10x42 amzn.to/2HwBEuZ Vortex Diamondback 10x42 amzn.to/2EjXIXm
Arrows: Easton Axis 300 amzn.to/2LXkH0U Easton Camo Hunter XX75 2315/2415 amzn.to/2wiWqb3 Gold Tip XT Hunter 300 amzn.to/2Enb2dA Victory VForce TKO amzn.to/302kUF1
Releases: TruBall Stinger amzn.to/2ElkLBp TruBall BT Gold 4 Finger amzn.to/2HwBRON Scott Ghost amzn.to/302LXjq Scott Jaws amzn.to/2EqmyIc Scott Ascent Hinge amzn.to/2X3Csyz
Rests: QAD HDX amzn.to/2LXTyej Trophy Ridge Whisker Biscuit amzn.to/2VC3J7L Trophy Ridge Tack Driver amzn.to/2VRoHVe NAP Nighthawk amzn.to/2LTWvMM Hamskea Hybrid or Trinity Hunter: amzn.to/37Y1JwK amzn.to/3c48roh Rip Cord Rest: amzn.to/3c8faxE
Broadheads: Magnus Stinger/Buzzcut amzn.to/2LW5Qnu Black Hornet/Ser-Razor amzn.to/2VC1j96
Vanes: Blazer, Fusion X Qii, Bohning X Vanes, Bohning Heat Vanes, Gateway Feathers
Sights: Trophy Ridge Peak V5 amzn.to/2EmfwkI GWS AR-19 Single Pin amzn.to/2JTsgDg CBE Engage 3 Pin Hybrid amzn.to/307hT6t EZV Bowhunting Sight ezvsight.com/
Quiver: Bohning Lynx 4 Arrow amzn.to/2HsAPDh
Stabilizer: Hi-Tek amzn.to/2HsUToQ CBE Torx Hunting Set amzn.to/2Dg6asY
Bow Press: Last Chance Archery EZ Green amzn.to/2HrgOwS
Targets: Morrell Targets High Roller 21 amzn.to/2VC202c YJ 450 amzn.to/2WjAivs Morrell Targets Supreme 3 amzn.to/330jSLG
Treestands: Gorilla Climbing Treestand XOP Vanish Treestand amzn.to/2LX1tIK API Outdoors Huntin' Sticks cabelas.xhuc.net/roVWv with Lone Wolf Versa Button rope modification
Camera: Canon Rebel t6i amzn.to/2HuQsdy 18mm-55mm kit lens
Mic: Movo VXR10 amzn.to/2VWmvvO Wireless Movo MWX1 amzn.to/2D9b2Ag
Full Saddle Hunting Setup:
11mm Static Line: www.rei.com/product/472262/bl...
8mm Accessory Cord: amzn.to/33zYRVW
Carabiners: Black Diamond, amzn.to/2KzzRqp Mad Rock, amzn.to/2YPGXjk
EZ Hunter Sit Drag: amzn.to/31FWdME
Ropeman MK Ascender: amzn.to/2Z6xr6H
Foam Pad: amzn.to/2Z1kcUR
Primal V Step: amzn.to/2H7KTAO
Black Diamond BOD Harness: amzn.to/2H2fGPJ
Tethrd Phantom and Predator Platform: tethrdnation.com/
Packs: Badlands Monster Fanny Pack: amzn.to/33YKefp 3V Outlaw II Sling Pack: bit.ly/2WsgftW 3V Gear Redline Hydration Pack: bit.ly/2WsgftW

Спорт

Опубликовано:

1 янв 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 43

@charliedunn77 5 месяцев назад

It would be awesome if you could do a video on how to get a bow in spec if it's off after changing string and cables. Awesome video!

@JSJTOUTDOORS 5 месяцев назад

I never had any luck with archery local archery shops. I got out of archery for a long time because I couldn’t ever get my bow to shoot how I felt it should. Since watching your channel and asking you a few questions I bought a new bow and a press and setup and tuned my own bow . It is shooting great and I feel very confident with shooting my bow. I want to thank you for getting me back into archery.

@chrisjackson7625 5 месяцев назад

some bow shops will do things incorrectly so you will come back to them shop where i live did it to me other words if they think you are dumb they will try to take advantage of you try to take your money

@HumbleHunts 5 месяцев назад

If I could go back in time and give myself one piece of advice it would have been to buy a used bow and invest my savings in a good bow press like the ez green. I’ve come out of shops only to find myself right back a few days later becouse my strings stretched. I found myself blaming shops, now I have no one to blame but myself. Happy shooting guys. God bless

@WolfinWolvesClothing713 5 месяцев назад

Yep, the money I've saved buying one season old bows, and setting them up myself, has paid for my press, vice, saw, levels, etc... more than once.

@rogerhook8002 5 месяцев назад

To cut the peep loose get a seam ripper from a material store. This is a must tool for any archery shop. You cannot get by without this sewing tool. You will use it to remove anything, whereby you must cut serving type material, from anywhere on a bow.

@chrisbowman2030 5 месяцев назад

Hi Nate, i saw your video on strings & cable change from a few years back. Helped me alot as a new compound shooter! Your other videos too. Much appreciated! Greetings from a viewer from Germany.

@parkerchristian229 5 месяцев назад

I just happened to do this for the first time about 4 hours ago, followed your last string change video for a guide

@sahhull 5 месяцев назад

I use a BowMaster press. I built a wooden cradle to hold my bow. so Im not balancing the bow and I have both hands free. The cradle has a vertical bar with a small bungee so I can hook the bungee to the d-loop/string to keep a little tension. All my measurements are taken from the top axle. I change one string/cable at a time. Old one off new one on. That way if I get distracted, I can be safe and let the bow down and continue later without too much problem. Oh I make my own strings and cables. Like you say... Its really not difficult.

@faulknertjf1984 5 месяцев назад

Just did mine for the second time, so much faster. Thanks for all the advise on the first go round. Really helped out.

@Ashepnasty 5 месяцев назад

Still love your channel. Glad you’re still doing them.

@steveirving1 5 месяцев назад

Great video! Just to confirm....if the axle to axle was off you would add or remove twists from the cables. Right? What if the A2A was good but the brace height was off? Adjust the string?

@jimmyanthony6557 5 месяцев назад

Do you have any videos on how to set nock height, tie D-loop, tie in the peep, etc?

@chucklewis5396 5 месяцев назад

Great vid man! Keep it up! and like someone else put.. do a vid of getting a bow in spec with new cables/string on it.

@XXXston3wallXXX 5 месяцев назад

Thank you

@l.i.archer5379 5 месяцев назад

Nate, before you start, mark the cams with a silver Sharpie above and below their limbs so you can put the bow back to exactly how it was.

@WolfinWolvesClothing713 5 месяцев назад

Almost all bows have timing marks somewhere on the cams.

@l.i.archer5379 5 месяцев назад

@@WolfinWolvesClothing713 timing marks don't mean a thing if you can't get the bow back to exactly how it was before the string swap. Those marks are specific to a person with the draw weight, draw length, and s/he won't have to readjust any pins on the sight. You go by the factory timing marks, and your draw weight could be off by 5 lbs, depending if the cams are advanced or retarded between those marks.

@WolfinWolvesClothing713 5 месяцев назад

Yea, they're permanent marks, not any different than a marker mark. Put them back where they were..... pretty simple.

@l.i.archer5379 5 месяцев назад

@@WolfinWolvesClothing713 whatever you say...

@WolfinWolvesClothing713 5 месяцев назад

Yea, don't you own a tape measure? Say the timing mark is 13/16 from the limb. Put it back there. That's going to be way more accurate than, "well I think the marker mark is in the same place"...... so, yea, whatever I say.....😉

@botchvinik8668 5 месяцев назад

Thank you good sir, for another excellent video of helpful info./tips. If my bow is out of spec. with respect to axle to axle, with strings that have a few hundred shots on them (so not new strings/cables), should i try to put the axle-axle measurement back to spec or just leave it where it is?

@averagejackarchery 5 месяцев назад

ATA length is first step. Second is to check poundage, letoff, and draw length on a draw board. I have a video on the channel on how to diy build one for less than $50.

@botchvinik8668 5 месяцев назад

@@averagejackarchery Cool. Thank you, i really appreciate the reply/answer! ....and super fast too. :-)

@WolfinWolvesClothing713 5 месяцев назад

Yep, draw board is really helpful to check timing after your done.

@maynardcarmer3148 5 месяцев назад

In April of '22, I had a new string and cable set (Winner's Choice, if it matters) put on my bow. Since then, I have shot it over 600 times; and yes, I keep track. Just out of curiosity, how many shots should a string and cable set be good for? Mine still look good, and I wax them as necessary, but looks can be deceiving.

@averagejackarchery 5 месяцев назад

A good set of string and cables is good for a solid 2-3 of use. We're talking upwards of 10,000 arrows.

@stormchildkennelsjasontrac6749 4 месяца назад

Installed a new set of gas strings on my hoyt torrex. Timing was off, twisted buss cable 4 times, and top cam is still behind. How many twists is too much? What else should I be checking/adjusting? Thanks buddy

@averagejackarchery 4 месяца назад

That is unfortunately a Hoyt problem and not a GAS problem. Hoyt did something with their advertised string lengths for years with their hybrid cam systems. Was a very common occurrence to have to twist the buss cable super tight and relax the control cable a lot by taking out twists in it. Good luck!

@stormchildkennelsjasontrac6749 4 месяца назад

@averagejackarchery well after a lot of twisting and untwisting, I think I have it. Top cam is a 1/16 ahead of bottom cam. I think I can live with that. Thank you for the advice and much appreciated.

@stormchildkennelsjasontrac6749 4 месяца назад

@@averagejackarchery with all of the twisting I had to do with my cables, would that affect my let off and brace height?

@Angel.Custodio 5 месяцев назад

This is a cam question. Is Hoyt the only manufacturer that has a cam the peaks at 28”? I’m 27.5-28 and I was wondering which new bow would be the most cam efficient. Or is that not important?

@averagejackarchery 5 месяцев назад

We used to think it was very important. Now, with modern builds, it's nowhere near the end all be all. Most manufacturers have gone with one cam and one, maybe two, modules to accommodate all draw lengths.

@Angel.Custodio 5 месяцев назад

@@averagejackarchery thank you. I want to get an Athens Axxis 33, it seems like a great overall hunting/target now for me, but for the hunting aspect I worry about the speed with a 450 grain arrow.

@WolfinWolvesClothing713 5 месяцев назад

@Angel.Custodio They're all pretty efficient anymore. I can say after owning 2 athens vista's, and having to shim one way to the side just to get my sight out from behind the riser, and having to push the adjustable cable guards all the way to the side on both, to get the cables out of my sight picture, make sure you can go shoot one somewhere. It honestly might be a better idea, to buy something a season old, and buy a press. I've saved enough buying bows off ebay, and setting them up myself to pay for my press, vice, saw, string levels, etc... more than once. Other than that, both athens are sweet shooting, but the axxis sounds kinda slow, and most of the time if a bow needs shimmed, it only needs shimmed once the whole time you own it. So don't let the adjustable stuff on the limbs be your deciding factor. I think it's adding too much weight to the limbs and slowing it down. Idk. Just food for thought. Good luck on your archery adventure.

@Angel.Custodio 5 месяцев назад

@@WolfinWolvesClothing713 thank you!

@Angel.Custodio 5 месяцев назад

@WolfinWolvesClothing713 with a 7 inch Brace height I was expecting, and am okay with some speed lose, but I am wondering how slow is to slow. I know it's am opinion thing. But still.

@jthepickle7 4 месяца назад

(a blatant attempt to enlist your aid:) We were all born Left-Handed until committing our first sin. Vertical nock travel is my problem, I think. Cable twisting is my solution, I think. For hours I have adjusted rest, nock point, cam timing, tiller differential... This week I've begun twisting the cables and string; to add to the muddle. Since October, when I bought the bow, I have not shot ONE bullet hole. I have NOT shot anything but an 'up tear'. 1000 holes, ALL an up tear. I'm on the verge of hair tear! Please help! Bow has hybrid cams, one yoke. Bow has never been thrown angrily or otherwise. The purview of the control cable is cam timing - I think. The function of the yoked cable (esoteric cable) remains unknown, and most likely added to the bow by manufacturers of the bow press. The video which denudes all mystery, concerning 'string tuning' , must surely be taken down immediately - lest we, for a moment, believe that this earth is not our Home. The meat of my query: What, in particular, do the three strings do?

@WolfinWolvesClothing713 5 месяцев назад

So easy etc... lol, unless it's a mathews, then you get to pull axles, cams, yokes, take the roller guard apart, etc...