Changing A Hunter PGP-ADJ Nozzle

Подписаться 27 тыс.

Просмотров 124 тыс.

50% 1

Shop now: www.sprinklerw...
Sprinkler Warehouse Product Specialist Dwayne Pro walks you step by step through the process of changing the nozzle on a Hunter PGP-ADJ Rotors available at www.sprinklerw...
🌿 Sprinkler Warehouse: Your One-Stop Shop for Irrigation & Landscaping Needs 💦
bit.ly/sw-home...
📧 Get Great Deals! Sign Up Today!
bit.ly/sw-mark...
We offer a hefty selection of professional-grade products for both contractors and DIY enthusiasts, from smart solutions for efficient water management to sprinkler system accessories to the repair tools to keep everything running smoothly.
_____________________________________________
Shop All Categories:
Shop Controllers → bit.ly/sw-cont...
Shop Drip Kits → bit.ly/sw-drip...
Shop Rotors → bit.ly/sw-rotors-
Shop Spray Heads → bit.ly/sw-spra...
Shop Valves → bit.ly/inline-...
Shop Blu-Lock → bit.ly/sw-blu-...
Shop Nozzles → bit.ly/sw-nozzles
Shop PVC Fittings → bit.ly/sw-pvc-...
RU-vid comments are not monitored. Please direct your questions to the customer service representatives on www.sprinklerwarehouse.com. Warehouse hours are 8am-5pm Monday through Friday.
#sprinklerwarehouse
#irrigation
#sprinklersystem

Опубликовано:

12 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 30

@PanyingPilot 4 года назад

You were helpful to me so I will return the favor. The sprinkler head can also be held in place with a metal band clamp tightened with an electric screwdriver fixed with a appropriately sized socket for speed. Some of us dont have access to a dealer who sells all the accessories. Thanks, Glenn

@bluestar9463 4 года назад

It's 2020 - Amazon has everything you need.

@PanyingPilot 4 года назад

@@bluestar9463 Thanks for the remimder.

@bluestar9463 4 года назад

You can order spelling books too....

@PanyingPilot 4 года назад

@@bluestar9463 This has turned toxic. I'm through with you.

@scottryan1559 3 года назад

You are my hero! I loosened the screw too much and the nozzle shot out. Luckily, I found it and because of your video, I learned how to install it. Thank you!

@annequinlan3062 2 года назад

Hahah!!! Same EXACT thing happened to me today…and this video also helped me figure out what to do!!! Thank u!!!

@abb0tt 3 года назад

Hot tip: if your rotors have an ON/OFF valve. Switch the rotor valve to the OFF position, loosen screw clear of nozzle, and turn the valve back ON momentarily -- the nozzle usually pops/flies out 1-3 feet due to the water pressure, then immediately turn the valve back off. Install new nozzle, tighten screw, and then turn rotor valve back to the ON position. You can avoid damaging nozzles this way since no pliers are required.

@whelen4004shorts 20 дней назад

The only rotor I know That has this feature is the I-20

@randypatrick9764 4 года назад

Pre-installation I just hold the sprinkler head in place with my hand. If the sprinkler is already installed I use a pair of locking pliers with a cloth to protect the shaft.

@hfk1001 2 месяца назад

Great video, straight to the point , thanks

@whelen4004shorts 20 дней назад

Guess where I get all my sprinkler parts all from sprinkler Warehouse my favorite sprinkler supply store

@notavailable9919 2 года назад

Protip- Use the "L" portion of a small allen wrench to remove the nozzle it will avoid deforming the plastic with pliers or screwdriver.

@eansugarman4675 4 года назад

Great video thank you

@SprinklerWarehouse 2 года назад

Glad you enjoyed it

@rslsr56 2 месяца назад

Who can tell me where to get the different port size nozzles, what the advantages of changing them are, and if there are low water pressure issues, can a best size port give a more thorough coverage. Just showing how to change it doesn’t teach me what I need to accomplish, which is better coverage with lower pressure or low gph flow.

@pennam2 3 месяца назад

I gotta buy a better needle nose cause i mangle all my nozzles when using my flathead

@remcat3572 7 месяцев назад

Can I just change out the nozzle part to existing sprinkler heads. There's most rainbird out there now. Or do I have to change out all the heads? Thanks

@ctrlzyx2 3 года назад

Okay, Dwayne, solve a mystery. What are the two nubs on the one finger ring used for on the Hunter sprinkler tool? The one ring is just round; the other has two square nubs spaced about 1/2 inch apart. They must have a purpose. Driving me crazy.

@SprinklerWarehouse 2 года назад

Hello, I can completely understand. Per Hunter, the ring that has two squares is simply to grip. The HUNTER ADJUSTMENT WRENCH consists of a 3/32 Allen key, two convenient finger loops for gripping, and an opposite side arc adjustment key for all your Hunter rotor adjustments, including the radius. www.hunterindustries.com/support/residential-rotors-obtaining-hunter-adjustment-wrench

@tjbrown9592 4 года назад

how do you replace the screw if it accidentally came all the way out?

@JCC545454 3 года назад

Seems Archaic

@WV591 2 месяца назад

if only it were that ez like youtube. I stripped 3 allen key tools to back out the damn screw. had to add oil before it came out.never was able to get the red nozzle out it got destroyed. this types of videos are BS . try this on a real 10-15 year old PGP not a studio version.