Changing Fork Seals on Honda Africa Twin

Подписаться 2,7 тыс.

Просмотров 7 тыс.

50% 1

All part numbers are provided below:
Spring Collar Holder: 070MF-MBZC110
Collar Insert Tool: 07AMB-KZ3A100
Dust Seal: 91254-KZ3-003
Slider Bushing : 51415-MFR-671
Guide Bushing: 51414-MFR-671
Fork Oil Seal: 51490-MJP-G51
O-Ring: 91356-KZ3-003
Torque Values:
Bottom Bridge Bolts - 18 lb.ft.
Fork Cap - 26 lb.ft.
Top Bridge Bolts - 16 lb.ft.
Axel Pinch bolts - 16 lb.ft.
Axel Nut - 44 lb.ft.
Caliper Bolts- 33 lb.ft.
Become a Patreon Supporter: / 1_literadv
Thanks for watching!
1 LiterADV

Авто/Мото

Опубликовано:

29 июн 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 35

@1LiterADV Год назад

Please post any comments and/or questions and we will do our best to answer them. Thanks for watching.

@ktmron72 Год назад

Best Video yet and no annoying music.......Well done.

@1LiterADV Год назад

Thanks for the compliments!

@bryanchilds5550 Месяц назад

Great video looks like I’m going to do mine now thanks for sharing that video well done

@1LiterADV Месяц назад

Glad it helped!

@1LiterADV Год назад

Please note that all part numbers and torque valves are in the description.

@laurentdaoudi3656 Месяц назад

Right to the point, nice video 👊🏼✌🏼

@1LiterADV Месяц назад

Thx for the complement.

@monkeybusiness1559 Год назад

Great tutorial 👌 Spring upgrade and seals are on my to do list.

@1LiterADV Год назад

Thanks for the feedback. Good luck with the upgrade!

@sameermulla5950 2 месяца назад

Excellent work thank you

@joaoraposo6091 8 месяцев назад

thank you!

@Factsmatter- 8 месяцев назад

great video! what size spring holder and spring tool needed? Thank you

@soggybawsmoto Год назад

Amazing production quality! Having made something similar (in less professional surroundings) this must have taken ages to film and edit. Did you film as a two man team? Mech & Camera man?

@1LiterADV Год назад

Thanks! Yes we are normally a 2 man team. Michael is the mechanic in this case and Yev behind the camera or on the VSTROM in other videos.

@dbmiller5881 Год назад

awesome detail! I love "DIY tools" too ;) I'm wondering.... if you shortened those long tubes (spring cap?) a little bit, would that effectively lower the suspension? I suppose that would also lose travel, in an already soft setup?..

@1LiterADV Год назад

Thanks for feedback. I’m not sure I can comment about cutting down spacers and the effects on suspension. You would need to be advised by a suspension professional.

@user-sw7pz9uh5s Месяц назад

Did I miss what the oil level is set at? I pulled one a part off an ES and the one that wasn't leaking had about 60-70mm from the top and I believe it's 10wt for anyone curious.

@seangroner5095 Год назад

I noticed a different order with yours to others. You leveled oil with spring out, others did it with spring in, that difference fairly concerning in volume of oil. which is correct?

@1LiterADV Год назад

Spring out is how manual reads.

@jonreimer440 9 дней назад

Your torque section with the front axle nut is either confusing or very wrong.

@user-oz4el1bu6e 5 месяцев назад

Fork oil capacity?

@siuhong369 10 месяцев назад

It seems you installed the spring upside down. Please explain it.

@1LiterADV 10 месяцев назад

Springs are installed per Hyprepro instructions….but you’re correct that it is opposite of OEM springs.

@siuhong369 10 месяцев назад

Then you should tell your audiences it is not OEM…. You may misguide them to do it the wrong way.

@GurmukhSingh-hl6dm Год назад

How much oil does each fork need to be filled with ?

@1LiterADV Год назад

Fork oil level is 95mm down on standard and 110mm on AS. Of course this is with OEM components. Oil level is measured from the top of the tube with spring removed and fully compressed.

@georgeambe4236 2 месяца назад

Great, but what quantity roughly speaking in case you don't have level tool

@ibrahimyldz7650 Месяц назад

@@georgeambe4236 721 ml each tube

@jepomer 11 месяцев назад

How much time is needed to change the fork seals by a competent mechanic?

@1LiterADV 11 месяцев назад

I would plan on doing one side at a time. If you have all of the specialty tools, I would budget an hour each. Maybe 1.5 hours

@jepomer 11 месяцев назад

@@1LiterADV - I just had both sides done by my local honda dealer. They charged over $800 labor. Seems like I was charged for the learning of their tech. Thank you for the quick response. After seeing your video, I feel confident that I could do the seal replacements in the future using the Honda Service Manual.

@lmnt02 Год назад

this would be one of the best if the Lighting was TRASH!!!!

@1LiterADV Год назад

Thanks for the feedback. Videos take a tremendous amount of effort, time and resources. Then there is editing and post production. We are trying to keep the faith and hope YT videos don’t go to the wayside with all other types of videos out there.