DO OUR VIDEOS HELP? SUPPORT THE CHANNEL and help us make more content! Buy rubber tracks, heavy duty tooling, and undercarriage parts at tinyurl.com/Support-TekamoHD
I like your videos, however on this one, one thing got me. Remove the cap to the tank to remove any pressure, then put it back on. You left it off moving bolts over it, dropping a bolt into the tank could happen.
Instead of taking the snap ring off , he should've rotate the filter 180° and remove the whole canister out. That way you are not releasing any dirt out. That's the right way.
Need to rotate the whole cannister 180 degrees, then remove the entire cannister and THEN change the filter and drain the dirty oil. Doing it this way keeps all the dirty oil in the tank.
That's not the correct way to change the Hydraulic filter. You just dumped dirty oil into the tank line. There are directions on that handle on how to do it right.
H thanks for the video. My Hitachi UH061 has a strange round smaller cap on the top of the suction filter - feels like rubber - it’s under the fluid level. I haven’t figured out how to remove it. Any ideas?
Hi sir. 1st thnx. Ur video is very useful. But 1 time u did mistake. U r open hydrolic tank cover. Remove gas but u not fix cover and remove bolt. Any bolt slip ur hand and drop in tank after to much prblm.
