Changing the brake pads on my DS3 

nice video, consider pushing the piston back before you pull the caliper up. I need to do mine but I think you can undo just the bottom bolt and swing the caliper, other thing is if you get squeaks use some copper grease.

I'm guessing you open the brake fluid chamber before pushing the piston back in?

Next time you do your pads just take bottom bolt out of caliper lift it up and change pads

Thanks for posting this. I have a c4 with brake pads wearing thin. I was going to take it to a garage but I'm pretty confident I could do a better job myself. I used to service my own cars, so this shouldn't be too difficult?

Good video, to the point. Typical garages, I had a Fiat dealer say the same to me (discs and pads) checked it that night, plenty of meat on the pads... Do you know if the DS3 has any kind of dashboard warning when the pads are low or not? Thanks

Oh my shit the bed does every garage say that, my car on last Mot Bought new ones not even half way But always good to Do a good clean up maybe some grease on the pistons disk hub help to get wheels off.

Hey! Silly question but where were you putting the trolley jack on the front? I always struggled to find a place to put it to be able to place an axel stand too

Hopefully you told the garage to shove there work imagine the mot fails they get through 😮

Nothing wrong with the pads at all

Did you have to bleed the brakes after at all after you fitted the new pads ?.

for the service just change the oil and air and the pollen filter

Zero wrong with the original pads, in fact your new replacement pads are probably poorer quality then the OEM ones you just replaced. A quick clean up of the discs and pads with some brake cleaner to remove and brake dust would have been a better option looking at the OEM pads.

"C'est plus tot les disques que il fot changer kkkkkk

There was nothing wrong with the old pads!!!

It would have been advantageous for you to show the car and to keep your head out of the shot.

im not sure why your garage told you they were low after seeng those pads, if you dont drive like a maniac pads can last for thousands of miles

Check brake discs thickness with a micrometer, 22mm when it's new and minimum 20mm because I think they are very close to the minimum. Everything you need to know to make this properly or for any other intervention in your car you can consult it in service.citroen.com (procedures, maintenance schedules, diagnosis, technical service bulletins, OEM parts numbers and prices…) Registration is free choosing you are an independent workshop... One hour subscription is €7 +VAT to download all technical information you need about your intervention for Citroen, Peugeot, DS brands (procedures, torque specification, required tools and parts…) Ondo izan,