Channel Updates and Jaguar Disassemblies 

Wesley's the sort of guy I wanted to be but never put the time into being. You're a cool guy, mang

Can't wait to see what you make with a metal printer. Especially given the stuff you were already doing with plastic printed parts.

Mad scientist gets a new lair!!! Can't wait to the Frankenstein creations, love your work 👍

Wes you’re a gem man. I cannot wait to see you crack the thermal energy paradox with a 3D metal printer, zip ties, resin, and a whiteboard full of genius. Post as you can man. We can and will wait.

Super stoked for Ducati Monster content! Should be a similar engine architecturally to what I have in my SuperSport! Also stoked to see more XJS content. Shame that V12 wasn't savable, but they're really not as complex or esoteric as people assume they are. Just very ugly accessory packaging and prone to typical issues that cars of the day had with early EFI, softlines going to "floating" fuel rails, etc. Looking forward to see what you dump in it. I need to get another one of these, but I'd like to update the V12 and let it breathe easy and sing through a custom exhaust with a 5 speed manual behind it. Just make the ultimate grand tourer.

I'm glad people like you exist and put content out there for us plebs.

"You guyses" Never fails with this dude.

holy crap how'd i miss this video. A full-on metal 3D printer? Those things are not cheap! Congrats on the new stuff and new place!!

Enjoy the new house and 3D metal printer! I'm looking forward to all the cool and odd stuff you create with the printer.

Needless to say I am living vicariously through you. I CANNOT wait to see what you're going to do with all these new machines!!!

Will miss seeing your 6x6 jeep down the street, wishing you best of luck!

Good Luck with the project!! Im already waiting for the next video.

Looking forward to the new location and setup. I have XJS as well that suffered an engine fire (surprise surprise) with the previous owner. The engine teardown at the end of the video was very interesting.

This means BIG things for you

Can't wait for the new shop and content. Always fascinating. Keep it up!

If you struggle to get the v12 running right, look into the dual Holley sniper EFI setup, self tunes fuel map and runs fine with any independently controlled ignition timing.

DUDE WHAT DO YOU DO FOR A LIVING Congrats!!

Hope the moving go as smooth as possible.

Great job and good luck

Sounds like very cool stuff is in the works.

Sweet, keep telling us cool stories

I hope everything is going your way and you'll have enough space and good neighbors in your new home.

Thanks for sharing.

Good to hear because I’ve been needing some Wesley Kagan content!

Please keep the brick and orange walls at the new place.

I can't wait to see what you're doing with these two printers!

Glad you’re still around dude, congrats on the upgrades 👍🏾 are you staying in AZ?

Good luck on your new venture Looking forward to your new prints

Great Updates. Looking forward to the future craziness

Keep it up man. I'm here since the 1k mark. Keep supporting innovation!!

Enjoy your new maker space! You certainly deserve it :)

New space mentioned, excavator visible from 3:30 not mentioned? 🤔

Have you seen the Gordon Murray rocket? If not then you should, it’s the best designed lightweight motorbike powered car you’ll find, dude went on to change open wheel racing forever since that point

Keep it going. Looking forward to seeing all the new stuff

I like your "out of the box" ideas and that you really doing it. By the way, nice table you got there.🤣

Wow, you've been busy! Awesome! Any chance we"ll get more freevalve vids?

Awesome news! Take your time and enjoy it

Congrats on the upcoming move/shop!

Cant wait to see more of the jag 12 .... always liked those motors and thought they had so much more potential if someone would just spend the time on it...

Freevalve jag motor. Make it so guiding one.

3:40 to 3:46 from sadness to glory...

4:20 nice also hey i got a job as a cnc milling/turning operator. living the life. babysteps

I’m keen to see where metal 3d printing goes, if it’s any better than the compressed steel dust gears in some tools it will be very handy. Can’t wait for the 3d printed Briggs head and piston. Would be a good way to get a better piston suited to diesel too

What’s your profession and education? I am a huge fan and BSME senior, your active aero video inspired my mech lab design project. Congrats on your metal x and Carbon printer purchases big money stuff very exciting!

I have been trying to find a jag body like that for a mercedes turbo diesel swap. And custom paint. Something I've been wanting to do for years.. I have a nice mercedes w124 low mile car for motor and trans. Just haven't found a good body that doesn't have trashed wiring.

I am curious if your new office will have the snow cruiser in the background. It is a cool machine.

A true engineer's engineer! From an engineer.

I can see why my father never let me get a used 1989 XJS, I guess one can make a lot of bad decisions when you dream about something since you were eight years old.

4 20, nice

Bigger shop, metal 3D printer - sweet. Just hire movers, don't do it yourself, your back will thank you :-P

dang i swear this xjs was driving wasnt it? cant beleive the engine looks like that but the table is nice

Congratulations on the Metal-X. Which size sintering oven did you go for and how big of a dewar of argon did you end up with? If you could just go ahead and figure out how to build a cheap hot isostatic pressing furnace and share that with us, I'd appreciate it. :)

How is the metal x doing for you? If you need any post machining done on parts just reach out. I’m in Tucson. I’m interested in purchasing a metal x but really want to see user content and use cases on it and look forward to hearing what you think.

Ah you bought 2 ducati monsters a conaisseur i see (of unreliable but o so good looking stuff)

Speaking of motorcycles, do you want a 1992 Yamaha TDM 850? It's been sitting around for a few years and I'm wanting to just get rid of it and I live near Oracle Junction, so not SO far from Phoenix...

Wow, where are you getting the finances for these cool projects? Do you have a "day job"?

What happened to the C3 project

3d printed turbo? 🤔

So was the guy in the Veritasium channel stealing your mechanical computer?

As I’ve gotten brighter and full of happy new ideas I realize tht I’m only one person and just how much time I don’t have to do everything.

I thought the title said "jugular disassembly" oops lol

How do you afford your rock and roll lifestyle?

Ooo a Metal X! Are you getting a new Gen 2 unit with the big external screen, or one of the older Gen 1 units with the screen inside the print area? Also are you getting a Sinter 1 or the larger Sinter 2 with it? I work for a Markforged reseller and work on these machines a lot, and its cool to see you get one. You're going to be able to do a lot of cool nonsense with it haha. Be sure to have some extra lower printhead feed tubes on hand; they're the number one part we have to swap. They only cost a few bucks, though, so it isn't a big deal.

my guess is that youtube does pay in order to get these printers lol

I've been looking for someone to print turbo wheels and compressors for drone turbine engines.....interested?

>casually buys 100k 3d metal printer

1: Thanks for the update. 2: does Elon Musk know you exist? If not, would you like to fiddle with rockets, maybe? 3: is the government paying you? cause: why buy one printer, if you can have two for double the price! (see Contact the movie). 4: holy schitt. looking forward to more shenanigans!

E

How does everyone on RU-vid have so much money? Like seriously?

..... Man be rich.

"I bought a Metal 3D printer, and While I was there I also got a Carbon Fiber 3D printer" That is going to feel so cool once you have those set up. The feeling you get with all the new possibilities running around in your head as it opens up a whole new set of options is so exciting. There is just something about getting tools that don't just open up the opportunity to do something better, or with more precision, but open up a whole new realm.

YOU'RE TWO WEEKS LATE!!!!!! All joking aside, now is the time to sell. Build the shop you want. 60x100 with a studio apartment inside is all an engineer needs

I love the wall mounted pc. Such a cool idea

So exciting to see you growing with the channel! I can't help financially but glad that my *like, comment, subscribe, and share* provides some small compound help!

Love the update, excited for new content, however, yo mama, and what's up with the dual keyboards

Hi from Australia. I’m heaps interested in the 3D metal printer and how far you can take the technology to make precise moving parts. Did you see Porsche have made 3D printed pistons?! That would be an awesome test. Also a liquid cooled rocket engine would be cool. I’m sure you could do all sorts of interesting stuff with that printer. Looking forward to seeing some future content. Cheers mate

Ooph, I feel the pain of that engine. Reminds me of some army auction surplus a buddy and I drove 3 states over to pick up. Got back home, opened it up, and 'til this day, no idea how sand got literally EVERYWHERE inside. Not a single cylinder, reservoir, or hose was untouched. Still though, British automotive engineering is known for making great tables.

I could just hear the neighbor across the street."mabel whoopee our property value just went up!” Good luck on the move

I knew about the metal 3D printing already, but carbon fiber ! I would want a CF 3D printer to just to waist lots of valuable time and money printing little cars I made in 2-3 hours time on car software.

That poor poor V12! I am glad it is living in the form of a table though

If you ever are in need of some user tips, I'd be happy to help. I've been a Markforged certified tech and have installed several of the Metal X systems. The technician who installs the system usually makes sure you're up to speed with the system and the Markforged customer service is very strong as well. But they do forget to mention things sometimes that are worth knowing upfront.

Crazy wacky ideas….maybe….but what if they work. 😉👍

You have real next level talent, I hope RU-vid brings you the millions you deserve (more than some twerking channel or whatever)

Ok, totally envious of the 3d metal printer and CF printer.

This is why I dont watch TV anymore. Thank you for great content!

What does loving British cars mean? I'm sure, that any amount of time spent with them makes this impossible, how wrong am I?

I wish you were my neighbor you wouldn't get rid of me. 🤪

This makes me happy. FINALLY.

what happened to the mechanical computer project?

Back again for another episode! Wohoooo!

would be cool to see a strength test between the carbon string vs the carbon embedded pla

4m20sec video. Nice.

THX !! Metal AD !!!

Wow, those are some seriously pricey machines. Will you run a print business on the side to finance those investments? Looking forward to see you using them!

Can't wait for motorcycle content!

This is super exciting, LET'S GO!!!

Congrats on all the excitement! :) Do you plan on continuing the mechanical computer project? The other stuff is enjoyable to watch also, but that's what brought me to your channel ^.^

"Who bought a motorcycle?" is my favorite non-sequitur to demonstrate what a raconteur I am. Anyway, congrats onthe coming upgrades.

Where's the Corvette been?

Love the content keep it up