Chaos in the Shed! Tire swaps and junkyard finds 

Your audio and camera work is way better than most auto channels. You are smashing it.

Always a good day when the dirt head shed releases a new video!! Right on man Happy belated Thanksgiving

The dirt head shed needs to hit 100k subscribers before 2024 we all need to make it happen shouldn't be hard either

MazGrande is definitely awesome! You and Fred building that was one of my favorite DED episodes. It's been fun watching you work on it on your channel here as well.

Great videos 👍🏻 I was wondering when you were breaking down that bead locker, I like that little blue impact you have . where did you get that? Thanks 👊🏻

2024 this channel is going to explode 🔥. Keep it RAD 😎 🤙

Your doing a killer job man, this doesn't replace dirt every day in my mind but it sure is awesome to still get to see what your doing, eaisly in my top 5 yt channels. Keep it up i love the projects and seeing whats going on in the shop!

Camera and audio not that bad. Dont beat yourself up. No big deal. Keep on with the great content. Look forward to the bed build on louie v10.

You are doing a great job with your channel 👍🏻keep up the good work ❤

My favorite mantra, “it’ll get better; it has to; it can’t get any worse.”

Dude your doing great progress not perfection. We all love yah. Still being you and that’s all that maters . Tip share :). All The tire swapping you’re doing. I’ve been doing a liquid balance and it’s epic. I mount tire, air up tire normally. Take a normal water bottle 16-32oz insert a piece of vacum or fuel hose into bottle: air tire way down , remove valve core. Slide hose into bottle which is filed with RV anti freeze so it’s environmentally friendly and cheap as heck. Once hose is in bottle of fluid simply jack the tire up. As it takes shape it pulls fluid into tire because of vacum. It’s magic I use About 16oz on a 33-35 and around 24-32 oz on 37” it was only way I could get my military Goodyear’s to balance and since then I’ve done it on a few sets and beat part is you can’t mess it up cause it uses centrifugal force like beads but a 10th the cost :) and also if you have a tire way out of round . Use a table top style Belt sander . Jack up a tire slowly turn it against belt sander obviously big bench style not hand held . Go slow with some 36 grit and she’ll be round. It’s only way I’ve figured out how to make some of these tires usable .

Dave, you're "so bad", I don't even know why I keep watching. Nah, all good. The content is great, I don't even notice video/ audio problems. Cheers

Your Hazel looks just like my Hazel did. Man I loved/love that pupper. She was my best friend.

Do you ever take Hazel wheelin with you? Speaking only for myself, I don't really care about production values and all of that stuff, so don't sweat all that. I tune in, and will continue to tune in because of the quality of your work and your take on workin, wheelin, and wisdom. Keep on keepin on brother, you got this and we're behind you all the way.

Yeah your camera work s getting better. I wish you and Fred would get cameramen, but that would eat up the profits. Maybe when you guys have grown some more. Keep plugging along. I don't agree with everything you do to your vehicles, but they are yours and not getting crushed.

I love your rigs! Do you get alot of parts sponsored or discounted for your builds. Having one rig burns enough of a hole in my wallet LoL. Stay RAD dude!

Raptor floor, and cab back, summit dynomat floor, roof, and cab back, black carpet, black headliner, be like a Rolls if also change cab mounts.

I bought 1 of those mustangs in 1995, brought it back 15 minutes later, got my $ back, luckily.

you're as bad as I am, I have a Jag xjs, Tj/Lj conversion, 28 mdl a all to do, I wished you were still here to do the exhausts

Have you used Counteract or another type of balancing beads? I wonder if that wouldn’t help the little bit of shake you have.

Why fix the Mazda? Its only gonna get wrecked! Thats called off-roading Dave😳🙃

You have made a couple comments in your videos about the fact that you had to go to work....what is your daily job? Will that always be the case or are you close to doing this full time. I don't do any off roading but have always been a fan of your shows. I am a track day pro touring hobbyist but your videos have made me want to start a new hobby.

We want to see what your working on. Couldn't care less about audio and camera technique. Don't change how you do it because then you'll be the same as everyone else. Just be Dave

Keep doing what you are doing, the audio/video is fine, content thats what we are here for..

Have you got a set of Method sure grip rims? I’ve wheeled them at 8-10psi and never lost a bead.

For all your bead lock bolt removal and installation, get yourself a bar stool that swivels. No more bending over and just spin it around.

im surprised you pulled the Milestars. I live in Wyomin, and have them on my trucks and they are great in the ice and snow.

brother man.... you can pick up PRP Polaris Razor seat inserts to install in factory seats to house the harness's. Stock mod

Keep the videos coming! Are those razrs bias ply, debating a set for my jeep just not sire about going back to bias ply when it sees alot of street miles

Major arcing when you started up the Mustang II. Looks like #2 or #3 plug!

Since you bave used a variety of tires id like to know which are your top 3 all time favorites? Best all around that you would buy no matter the cost?🤔

Are the non-sticky Patagonias junk compared to a more well known brand MT?

so out of all the tires you have had and tried what are your favorite mickey thompson , maxxis , milestar, bfg

More garage space = more stuff accumulated. I think that's a law of Physics 🤔 I've "reorganized" mine 4 times this year alone. We all get it! 👍

To be fair you probably could make a full video of playing with hazle and Noone would complain

Dude man who cares bout your vids they are more real then most of the stuff thats out and not full of bs plus your quite a character and a cool dude! don't sweat it!

YJ project coming up ? So does that mean it will be ready for EJS ?

Whoa whoa I saw a pair of iroks!! Those need to be on the Mazda asap Dave come on it’s snow wheeling season

I love how every mishap is a song. Speaking of songs what is that little rip in your intro?

Sorry but im to interested in the content to gripe about it not being tv quality perfect even though i think the product value is great

Your do great camera work Dave. Love your channel,keep it up.

You are getting better at the camera and video stuff Dave. Nice work!

Digin all the content the nonsense is hardly a distraction. Keep it up Dude!

Dave the content is great, the audio and video isn’t that bad….we forgive you

I like the quality of the videos. You’re one of my favorite watches on RU-vid these days.

An interior shop will mod youre seats for the belts to pass through. add some seat warmers too 😊

Thanks Dave BTW I think the camera and audio is fine.

I put 2004-2008 F-150 40/20/40 seats with Integral Seat Belts in my project truck. These solved my seat belt problem and are very comfortable. You likely will have to modify the brackets but for you that should be child's play. Love your videos.

Dade love ur work. Hope u had a great Thanksgiving.

Hi Dave, just curious to know if the Maxxis Razrs have "Minning" stamped on them. Or if its just a 35" and smaller thing in Australia.

No airbags for the tire machine lift? 😅 love the content keep it up!

What tires ya'll recommended for a desert/mountain environment. It'll be a working rig for recovery and trail repair. It's a 2000xj with a 4.7l stroker engine. 8.25 rear with a spartan locker and d30 open front. 5 in lift and it's got 33s right now. Won't go bigger till i do the one Ton swap. And i know you get what you pay for but man I'm outta money lol. That's why I'm asking the professionals

Changing tires…what a pain. They’re so damn heavy!

Much love from Guam/ Olympia, WA 🤙🏾🇬🇺🇺🇸🍻

I just got an 01 F-250 power stroke diesel 4x4. What would u recommend for hub assembly, I want to get something that will hold up for a while.

Concentrate on the builds you camera work is fine raw but real

My corgi isn't very happy with that comment.....

Even though Dirt Every Day is gone 😢, we need a new #clampy #mazgrande video!

You should have a "side project" counter like the machining channels that I watch. It's a cool funny thing to add. How many projects do I need to complete to complete the main project!!

8:52 dumb question Dave. Wouldn’t have been quicker to step up the bead breaker up high enough to work on the 40”?

Make it a goal to touch up MazGrande and take it on UA next year!

I always assumed this was what you basically did for a living. Do you have a regular job besides doing all of this?? If so, man when do you sleep?? 😮

Why do they only have beadlockers on the outside of the rim

Dang dude, you just built that shop and you’re already busting at the seams 😂. The more space the more stuff you find to fill it 😂😂

I have spent a lot of time at pick a parts and I have never found help. You lucked out

Keep making videos, keep them all below 30 min

Good stuff Dave. Like button energized.

I noticed that the tire machine spoons were low on a 40 when trying to swap my tires…. Wonder if I can get les Schwab to install a lift🙏

Im excited to see another truck build and I'm finally gonna start my first offroad project soon. Found a YJ in the desert and hoping to swap out the 4cyl, find an SM465 and work up from there! Thank you for your awesome videos as always!

Dave have you wheeled in the blackhills yet? Would be cool to see you take the Mazda on some of the trails there.

Keep up the good work Dave, I like the interesting projects you have including the mustang.

So are you hinting at an overlanding setup in the bed?

The Mazda is awesome! I miss it so. Great score on the ford 8 inch.

Maz grande for the win. My favorite in the fleet.

Are you and Fred ever gonna get together for some videos?

Hey Dave that mustang 2 is too damn cool.

5:59 what wheels are these you swapped on maz grande if you don’t mind me asking

Thanks Big D. Love your nonsense.

Motortrend needs to put you in a lot of their videos

Engine hoist pick up tire machine?

Your audio and video is fine! There is such a push for production quality but you have CONTENT, thats what matters! The mustang is my least favorite project, but i still enjoy the work on it, because i can learn from all of it

Keep it up man! Love your videos!

Always a good time on the DS!

Loving the projects... Hazel though steals the show...

You putting a locker in the eight inch

🦅🇺🇸💪😎👍 it's pretty cool that all of your trucks can run the same wheels. Just need to put tons under the Jeep and they all can share wheels and tires.

Thanks for the content Dave!

Do an Lj stretch with the yj!!

Your camera work and audio is fine for me, second my vote for Louis is to turn it into the ultimate overland offroad vehcile. So many people buy those $500k and up earth roamers, I say build one that can go rock crawling and mudding, and camping, and where ever you want to go. Bob the bed, leave the bed, make a whole new bed customized for holding alot of camping gear with built in roof top tent holder that is lower to frame. The sky is the limit

You have great content.

love all your videos. those tires and wheels are some back breakers to work with! i have a question, do you have recommendations for getting tires and wheels for good prices? it seems like even used (market place, CL) tires and wheels cost more than a lot of weekend wheelers trucks cost (at least mine) 15” rims and tires are pretty much gone and i need to move up It’s tough to afford. might be a good video idea for you. thanks for the videos

The Maxxis RZR MT are amazing MTs. I ran some 37s on my 2020 Ram 2500 6.7l and got 60k out of them. There was about 5/32” of thread left.

Dave, Take the time to use back in a better way.....back problems usually catch up with you later in life and it's no fun.....trust me.

Dave I think all you rigs are rad!! Thanks for keeping the cool stuff coming!!

Really enjoying staying up to date through these videos. As you guys used to day, "You're doing a great job, Dave!"

The 1/2 Dewalt brushless impact gun will change your life. No more hoses.

Keep up the good work.

I enjoy whatever you can film. It’s funny how many directions you want to go in simultaneously! What you need is some minions or something!

I'd still watch your videos if they were blurry 😅your an awesome fabricator and we all learn something from you ,keep up the awesome work 👏

looks like a corgi🤣