Charge any Battery with Control Module DC 6-60V XH-M604

Подписаться 8 тыс.

Просмотров 64 тыс.

50% 1

#electronic #solarpower
This is XH-M604 Battery Charger Control Module. This module can handle DC 6 volt to 60 volts. You can use this charging module to charge Lithium Batteries.
Get Module : s.click.aliexp...
Fork Wire Connector : s.click.aliexp...
Crimp Terminal Connectors: s.click.aliexp...
Specifications
Input Voltage: DC 6-60V
Display Accuracy:0.1V
Control Accuracy:0.1V
Output Type: direct output
Voltage Tolerance:±0.1V
Apply For:6-60V MAX 80V battery
Dimension:81*54*18mm
Use: In the setting voltage value, start button play button raised, about stop button role to down key
Settings
1. Set the start voltage:
long Press the start button, digital flashes, by start and stop button, set the start charging voltage value.
2. Set Stop voltage:
long Press the Stop button, digital flashes, by start and stop button, set the Stop charging voltage value.
--------------------- ABOUT SetNFix RU-vid CHANNEL------------
This is SetNFix RU-vid channel. If you are an #innovator, #DIY #lover or do not want to waste your time at home, this is the channel you should #watch. You can watch #Arduino Projects, #Electronic Projects, #Car repair #tips, #Computer Hardware and #software lessons, #iphone tips, #Android tips and much more.
Sign with this link and get 19 USD free
Contact : WhatsApp : chat.whatsapp....
Aliexpress : a.aliexpress.c...
Nano With the bootloader s.click.aliexp...
ATMEGA 328 s.click.aliexp...
100pcs 5mm LED s.click.aliexp...
5pcs Relay 12v : s.click.aliexp...
12x18cm single Side Prototype PCB : s.click.aliexp...
Buy head unit with 55% discount : s.click.aliexp...
Car Cigarette lighter connector with 15% discount : s.click.aliexp...
Car Headrest Unit Display with 16% Discount : s.click.aliexp...
2Din car radio player with 50% discount : s.click.aliexp...
Portable Car Steering Wheel Wireless Controller with 24% Discount : s.click.aliexp...
Waterproof Car External Receiver Antenna Repeater 45% discount: s.click.aliexp...
Car Dash Cam 1080P LCD Dashboard Camera 2.2" 50% Discount: s.click.aliexp...
You can follow us on
Earn Crypto Currency at home : cryptotabbrows...
Blogspot :setnfix.blogsp...
Website : www.setnfix.com
Arduino : create.arduino...
FaceBook : / setnfix
Hackster : www.hackster.i...
Reddit : / setnfix
twitter: / setnfix
kakao : story.kakao.co...
Arduino : • Arduino Projects
Electronics : • Electronics
Automobile: • DIY Car Modifications ...
If you have not SUBSCRIBED my channel, do not forget to subscribe, like and share my videos
STAY WITH SetNFix
------------------------------
Ascension by ZAYFALL / zayfallmusic
Creative Commons - Attribution 3.0 Unported - CC BY 3.0
Free Download / Stream: bit.ly/3ucF6mg
Music promoted by Audio Library • Ascension - Zayfall (N...
------------------------------

Опубликовано:

9 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 93

@FelterFox Год назад

thanks for Ur review master❤️❤️👍

@mervinpacia2617 10 месяцев назад

So if i use this circuit there will be no issues if i will leave my charger on 24/7.. because i will be using this to power my 12 v alarm system in my vacation house...and sometimes it takes months before i visit my place...thankx

@setnfix 10 месяцев назад

Yes. If you adjust the circuit correctly, no worries.

@thehighriseconstructionob9679 Месяц назад

Very nice , i need for 48 v to 72 volt battery how many amp can this hundle without burning up please let me know , its for e bike battery

@setnfix Месяц назад

This is for max 60V 30A

@fahimahmadosmani3618 14 дней назад

If i give 20v input from solar. Can i charge a 12v battery with this module? I mean, can this module step down the solar voltage?

@setnfix 13 дней назад

NO, If the battery is 12v, give around 14.2 volts.

@ady2c5 2 года назад

Does it also work as buck/boost convertor or do I need to supply exact voltage? May my supply voltage fluctuate? Thank you

@setnfix 2 года назад

no boost or buck. you have to use sufficient voltage are you required to charge the battery.

@sumitd4u 5 месяцев назад

12V Battery directly charge by 100W 18V Solar Panel ?

@black11189 Год назад

Using this I could use the alternator from my car to charge a smaller battery (like one in an APC) without the risk to overcharge the smaller battery ? Would this prevent ocer discharge too ? I suppose a battery isolator is require too ?

@setnfix Год назад

There is no discharging system. But once the battery is fully charged the power will automatically be cut off. Therefore, there is no issue about overcharging.

@octamy-qn8hl 11 месяцев назад

The LED remains light up after disconnect input supply. Also it continuesly used battery (consumes battery) when not connected to input supply. How to connect led that only light up when inserting input supply and led off when remove input supply on the module?

@setnfix 11 месяцев назад

It is required to connect the battery with circuit to detect the voltage level. Then only the circuit can detect the voltage is lower than the minimum voltage. The LED is just and indicator, if you do not want it, you can remove it.

@octamy-qn8hl 11 месяцев назад

@@setnfix already removed it, So how to connect led in between the relay (led light up when insert input supply from charger.)

@sridharv5969 3 месяца назад

@@octamy-qn8hl use a relay for the purpose..

@KalterKrieger Год назад

So, this is 2 point charger. What is the coil good for and the IC under the heat sink?

@setnfix Год назад

The IC with heat sink is a voltage regulator LM 2596. The coil is used as an inductor. Those are used to pass the smooth current through the circuit. Inductors are also useful in removing noise due to their ability to keep out high-frequency AC.

@dPFarmville Год назад

Hi my friend. I have a question I hope you can give some of your good advice. If I want to use this in my solar setup, where should I connect the line for the power source? Is it going to be connected to my solar panel array? I want to use this because my battery keeps overcharging specially during high noon. Thanks

@setnfix Год назад

do not directly connect this with solar. This can be used to charge the battery using power supplies. Use solar charging controller and set the correct settings to stop charging voltage then the battery will not be over charged.

@mahedihassan7611 2 года назад

Can i use it in 6volt lead acid battery???

@setnfix 2 года назад

Yes. you can use 6v to 60V

@rizwanahmed7236 Год назад

Can I connect this circuit with the mppt 60 ampare controller ?

@setnfix Год назад

yes. but limit the current to 30A

@rizwanahmed7236 Год назад

@@setnfix Thanx bro

@setnfix Год назад

@@rizwanahmed7236 👍👍

@-ESTITIK- 2 месяца назад

i have issue with this control module i test the battery in multimeter it shows 12.8v dc but then when i connect to the control module it shows 13.9v dc does anyone give the solution how to calibrate the display of control module?

@setnfix 2 месяца назад

It is normal to show the voltage is higher than the module on multimeter. But this is un usual.

@arpitsingh5152 5 месяцев назад

Can I connect adaptor first? My adaptor voltage is 19 volt.....does it decreases voltage 14v or 12.6v?

@setnfix 5 месяцев назад

No. you can not regulate the voltage using this module.

@arpitsingh5152 5 месяцев назад

@@setnfix then what is use of this module tell me sir... Solar panel also gives 19 volts, then it will not decrease voltage? Then how will it charge my 12v battery?

@arpitsingh5152 5 месяцев назад

@@setnfix We can give it 6v to 60 volt ..means it can regulate voltage

@weresheep9045 5 месяцев назад

@@arpitsingh5152 This thing will only output same voltage you feed it then cuts off power when it reaches max or drops below minimum. What you need is a step down buck converter.

@yusritassiem9913 Год назад

I don't think the circuit can handle 30amp the tracks is too thin at the bottom from the relay it will probably burn out

@setnfix Год назад

NO, I am using 30A power supply to charge 120Ah car battery. There is no issue.

@kaungzawhtet825 Год назад

@@setnfix I'm waiting for the next video that's charging a battery with high current..(max 30A) 😉

@Akuma_zenblood 5 месяцев назад

Will it work as under voltage protection?

@setnfix 5 месяцев назад

You can convert it.

@technicaldada5384 Год назад

Can we modify this module to charge 60v battery. , that is upto max 72v cut of voltages.??

@setnfix Год назад

I do not think so. Since this is a pre programmed one, we can not change. But you can hack with few modifications.

@technicaldada5384 Год назад

@@setnfix thank for confirmation 👍

@sohidali9852 Год назад

Can I charging 12v 150ah battery

@setnfix Год назад

150Ah battery needs 15A charger. yes you can use up to 30A

@keiannschyler Год назад

can i use this to charge car batteries?

@setnfix Год назад

yes you can

@keiannschyler Год назад

@@setnfix thank you.

@jamessacol8954 Год назад

hi, can I connect the module to a dc genarator to charge the battery? is the dc generator able to charge it? thanks

@setnfix Год назад

It is based on the battery current and the voltage.

@jamessacol8954 Год назад

@@setnfix how can I increased the current of my dc generator?

@arpitsingh5152 6 месяцев назад

Does it automatically set current and voltage of charging battery?

@setnfix 6 месяцев назад

No you have to set the cut off voltage and re charging voltage.

@arpitsingh5152 6 месяцев назад

@@setnfix I will set a voltage limit of 12.50 volt, but what if current is 5 amps but I need 2 amps for charging?

@setnfix 6 месяцев назад

@@arpitsingh5152 You need the 10% of current of the Ah of the battery. check this video how to control the current and voltage ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-9ousokeK9lA.html

@arpitsingh5152 6 месяцев назад

@@setnfixdoes this module work with Lithium ion battery? If I use Solar panel of 50 watt then it will give 20v.. Lithium ion battery need 12.6v something to charge Then will this module convert 20v to 12 or 14 volt for charging?

@drtahir232 Год назад

12v 5 battery use Serees 60v 40ampare use battery charging is perfect?

@drtahir232 Год назад

60v battery but use perfect or no?

@setnfix Год назад

normally it is recommended a charger with 10% from the Ah of the battery. This relay can handle only maximum 30A. If you want more, use a automotive relay like 80A

@sanaimtiaz8635 3 месяца назад

Can I use this module for AC DC fan 15 volt step ? Battery?😊

@setnfix 3 месяца назад

Yes. You can use max up to 60V, 30A battery

@sanaimtiaz8635 3 месяца назад

@@setnfix ni mere pass 20 ah ki lithium battery Hy 18650 wale

@sanaimtiaz8635 3 месяца назад

@@setnfix I have 30 ah lithium 18650 cells battery 12v

@sanaimtiaz8635 3 месяца назад

@@setnfix car I use this module for battery step up to 15 volt the I supply 15 volt my ac DC fan for speed up can it work for this

@setnfix 3 месяца назад

@@sanaimtiaz8635 you can charge your battery through a power supply.

@sridharv5969 3 месяца назад

When i connect battery to the module. My battery is discharging quickly. What the reason?

@setnfix 3 месяца назад

It takes only small current to keep standby the unit. I think there may be a short .

@sridharv5969 3 месяца назад

@@setnfix Can we use the module for a lead-acid battery?

@setnfix 3 месяца назад

@@sridharv5969 Yes, I am also using for 120A/h 12v battery (now more than 2 years)

@sridharv5969 3 месяца назад

@@setnfix can we use led acid battery?

@setnfix 3 месяца назад

@@sridharv5969 same question i think

@Said-iu9hq Год назад

Where can we find it?

@setnfix Год назад

s.click.aliexpress.com/e/_Dl6z5vt

@uio86a Год назад

Is the car battery 12v 80a also available?

@setnfix Год назад

yes, you can

@tharakamunasinghe9206 Год назад

Can input 46v solar panel directly ?

@setnfix Год назад

not directly, you have to use a solar charge controller.

@awesomedee5421 Год назад

Is this a boost charger? If my panel is 30V, can I charge a 60V battery?

@setnfix Год назад

Not engouh as if you charge a battery 60v, you may need power more than 60V.

@technicaldada5384 Год назад

48v & 51.8v lithium battery can charge with giving voltage below 60v.👍

@setnfix Год назад

@@technicaldada5384 Yes

@kaungzawhtet825 Год назад

can I charge 3.7v 18650 battery with this module?

@setnfix Год назад

no. this module can be used minimum 6volts

@shaileshsingh9641 Год назад

Can I set 58.4 cut value in it ?

@setnfix Год назад

yes

@ishtiaqali6955 6 месяцев назад

and you are using it with sealed lead acid battery

@setnfix 6 месяцев назад

You can use this for car battery as well

@adeshinaajibola5114 Год назад

Schematic

@setnfix Год назад

This is a complete board.

@ant8851 11 месяцев назад

Good video but why use the A I voice over. It's now hard to understand. I wont be subscribing. It sounds like I'm listening to British Telecom. Press 1 for this press2 for that etc. The visual part was very helpful though.

@setnfix 11 месяцев назад

Yes I know. In order to add voices, I have to get some more educements. Else, the sound will not be clear. I am trying to buy a good mic. Thank you. :-)