Cheap Amazon Exhaust Expander Broke 1st Time Use!

Подписаться 41 тыс.

Просмотров 33 тыс.

50% 1

Here's the Link to The Exhaust Ex-pander You Should Not Buy!Amazon Affiliate Links Below:
Mostbest 3 pcs 1-1/8" to 3-1/4" Tail Exhaust Pipe Expander, Exhaust Muffler Spreader Tool, 6 x Extra O-Rings,Tail Pipe Muffler Exhaust Expander Kit with Blow Mold Storage Case:
amzn.to/32Jt97o

Авто/Мото

Опубликовано:

15 сен 2019

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 129

@yckitchener2180 3 года назад

It broke because he used it wrong. That type of expander has to be fully inserted into the pipe. If it's only partially inserted, like he did, the stress of expansion is concentrated on the center of the steel bars. They are not designed for that, and they will break. If it's inserted all the way in, the stress will be on the round internal pushers, and it will work fine.

@trevorgriffith8994 2 года назад

Omg he was to violent using that tool.greace it up n use it manually with ease

@trevorgriffith8994 2 года назад

Great advice

@kukish48 Год назад

Agree 100% 🤙

@tomlangley6236 3 года назад

If you pack the tool with grease, insert it all the way in and hand tighten with a breaker bar they work great.

@trevorgriffith8994 2 года назад

Exactly works a treat grease it n use it manually with ease

@MoodSwingZX Год назад

Well some timrs U dont have that much space...

@LouwrensvanderMerwe 3 года назад

I had exactly the same experience and broke all three sizes in the case in a short time. Got a LISLE pipe expander from the US (which I should have done in the first place) and have stretched dozens of pipes since then without any problems. Thanks for the video. Cheers.

@matolittleelkwells5377 4 года назад

Great video brotha keep the camera rollin bringing us tried and true info

@douglasarnoldakers 4 года назад

I bought one of those are Sears about 25 years ago and still have it. Still work too.

@stanleymcman9422 4 года назад

@Saxson Jackman, I agree on the Lisle Pipe Stretcher Kit is really good as it can be used with an impact wrench to quickly stretch pipes. Collet sets expand pipes from 1-5/8 in. to 4-1/4 in. Turn 1-1/8 in. bolt with a 1/2 in. or 3/4 in it is sold at Home Depot for $153.88

@JB-qf5pn 4 года назад

Bringing back the stache! Don’t think I don’t see you brother, right on!

@JustinDowDIYcentralhighway 4 года назад

J B 😂😂🍻

@stephan4490 4 года назад

I have used astro pneumatic for years, identical to lisle but cheaper and it has not let me down yet.

@saxonjackman4825 4 года назад

I bought the Lisle brand, it’s the same design as the Blue Point. Works great, no issues 💯

@toolsmetals2148 4 года назад

Lisle Tools are really official alot of ppl dont speak or talk much on them but when they are mentioned only good things are spoken on the Brand

@adventurous63 4 года назад

Never had a Lisle tool I didn't like.

@toolsmetals2148 4 года назад

@@adventurous63 they are really official like that Great Quality

@MikeBrown-ii3pt 4 года назад

I've owned and used several sizes of the Lisle expanders as well as many other Lisle tools for years and never had an issue with them. They're not very expensive either.

@kylefraser5490 4 года назад

Great video Justin keep up the good work I heard matco makes a decent one of them

@nitroustommy3668 4 года назад

The fine print said "Use on aluminum only." 😂

@screwyou89 4 года назад

Thank you very much 4 this !

@stephenmcgowan6489 3 года назад

It only broke like that because of the dent around the pipe from a crush clamp if it had even pressure from a good/new pipe it wouldn't have bent/broke

@ChiefTuna 4 года назад

there's been a couple times where i through some heat on the pipe that i'm expanding and it seemed help.

@jfinch4676 3 года назад

Looks like it was damaged because u were using it on compromised pipe to begin with. The pipe had a severe ridge in it from the previous u-bolt, so when U applied pressure from the tool to expand it was all concentrated on the u-bolt ridge damaging the tool. Guarantee if u had used it on pipe that was round and not damaged it would have applied even pressure and worked fine.

@econocarr Год назад

You are correct, the tool did not expand the entire pipe just the part where the U clamps was.

@armandomarin-arias4021 2 года назад

!Very nice and elegant spitting! Da.

@ThePracticalMechanic 4 года назад

Mine broke as well. Different brand because the hex potion was different. Mine striped out the threads before it moved the pipe.

@toolsmetals2148 4 года назад

Great Video

@icemonk12 4 года назад

Great info👍🔧🍺

@russellkeys3937 Год назад

Lisle works great, but it fell apart and I'm having to replace the o-rings and TRY to get it back together properly

@MyHairyChin Год назад

Key thing with it is to fully insert it, as you see most them snap in the middle if you leave it partially out the end of the pipe, and i find impact wrenches are to much torque at once for them.....

@Lethalwar 3 года назад

used one today and used a wrench and wprked fine. Impact is taking it to far where you are ruining it. i believe big one goes up to 3 1/2 not 4" so you go until the exhaust slides in.

@6x9wizard 9 месяцев назад

I'm pretty sure you must put the whole tool into the pipe. Not just to the second o ring, next would be grease it up, to allow easier slip. And last, heat the pipe. Unfortunately the oring will melt so that becomes a replacement part. I'm surprised they don't have a steel wound ring spring so that it can take the heet. I'm also surprised that they don't use an acme thread as it has greater lateral streagth

@rustusandroid 2 года назад

The lugie was amazing.

@rossa6588 Год назад

I'm sure insert all the way is correct use?

@jdreynolds29 4 года назад

Yep. I hadn't harbor freight exhaust pipe expander and it also broke first time

@renaissanceman4267 4 года назад

OTC...makes a great kit....and Astro makes the same kit rebranded....both are heavy duty...and make nice expansion joints.....

@TheChrismanis1791 4 года назад

Whats the otc part number cant find if

@renaissanceman4267 4 года назад

@@TheChrismanis1791 .......Astro model #78835.....I have the astro expander it's the same as the otc....

@mopedwarehouse 4 года назад

That tool failed because it was not inserted all the way into the pipe. The Snap-on one will allow you to insert only a portion of it into the pipe the way you did.

@JustinDowDIYcentralhighway 4 года назад

CC&Z Shouldn’t have to insert it all the way just because it’s not Snap-On. You should be able to use the tool in the same manner regardless who makes it, but your right about the quality of the material Snap-On’s Exhaust Expander is made of. I used my former Chrysler Foreman’s quite a bit when I worked with him at the dealership & that was a Bluepoint Expander and I used it in the same manner. No issues.

@marianatequiero28 4 года назад

Got the same tool from HF ,it broke ,but it was way easy to do the return or get a new one ya

@oldmechanic9685 4 года назад

Nice video

@thisguysgarage 4 года назад

Got the job done Casualties of war

@paulandrulis4672 3 года назад

Question, of which I probably know the answer... Did you follow manufacturers instructions, or did you use your ESP on how it should work?

@davidwalle5025 4 года назад

I had hf expander do the same. A real pos.

@donaldpainter628 3 года назад

I bought the harbor frieght ones used the large one 4 times the same thing happened but it's only 19 dollars so to me I can replace it if they won't exchange it

@The1Ramsey3 4 года назад

You used it wrong, it needs to be fully inserted into the pipe to be expanded, second it is not rated for use with impacts, supposed to use hand tools only...

@JustinDowDIYcentralhighway 4 года назад

Theramsey3 not true. Snap-on makes this same kit. You not supposed to go passed the neck so being 3/4 of the way in is normal & it can be used with an impact. I’ve done it time and time again. The threads held up fine. It was the cheap metal flats that broke.

@The1Ramsey3 4 года назад

@@JustinDowDIYcentralhighway so you are saying that that cheap tool you broke was made by snap on? You are comparing apples to oranges. They taste different because they are made to a different price point. The chinesieum of the one you broke needed to be fully inserted into the pipe and have hand tools used. It is a metal quality and heat treating issue. I agree if you HAD used a snap on in this manner it would not have failed in this manner because it is rated for what you did to the Chinese tool that was not rated for what you did to it. If I am wrong about your cheap tool being impact rated or rated to only be inserted 3/4 of the way into the pipe please provide me with a link or documentation, I will gladly admit I was wrong and apologize appropriately.

@wmcwmc8623 4 года назад

2:47 LMFAO! Thanks for the heads up on this crappy tool Justin.

@mcribs7811 4 года назад

I see this tool every time I go into HF. Anyone know the price? I’m curious after watching this.

@nathan00campbell 3 года назад

got one from harbor freight, broke the first time i used it, did nothing to the exhaust pipe at all.

@Burbuja254 4 года назад

It is normal for it to break !! big hands !!! you have not put grease, and with the impact wrench with the expander in the middle, wrongly placed, what do you think will happen? well what happened animal

@busancun Год назад

Wonder if you read the instructions of the expander. Most of them are not good for impact drive.

@chrisparenti2461 4 года назад

So it’s a “two” use tool. 😂 thanks for the heads up

@toyota4x4legend 4 года назад

2:13, One time use tool or a tool that last 10 years or longer. Cheap tools have their place but the cheap tool choice aint so cheap in that situation.

@kevinperdew9145 4 года назад

Justin have you thought about doing any eastwood tool reviews? I dont hear much either way on their hand tools.

@JustinDowDIYcentralhighway 4 года назад

Haven't used Eastwood to be honest. So I don't have a good or bad opinion on them. I'll take a look over the weekend and see what they offer.

@heyyou5189 4 года назад

It broke because you should put it in all the way

@GTRliffe Год назад

you don’t use impact guns. some might work with much grease on threads. Use it manually

@Mike54880 4 года назад

If you find a good expander please let me know. Ive used Lisle, Evertough, OTC, and a cheap Amazon one. The amazon one was the best as they were all 1/4 time use but Amazon one was 1/8th the price lol I even tried heating pipe, cutting slits in pipe, and both heating and cutting. All broke before finishing first flare.

@Highstranger951 2 года назад

Maybe it’s not those tools, but the tool that’s using them…

@stupidass4567able 4 года назад

No Justin, you see, they're disposable. One time use, they work but only once.

@adamsa7138 3 года назад

It’s because as far I saw how it is design, you’re using it wrong, the all tool should be inside when U try to expand the pipe, if half of the tool is inside , the part inside will expand less than the one outside because of the restriction, and then finally break ! I tried mysielf with the all tool inside and it never broke.

@wayfastwhitie455 4 года назад

Weld that sucker in. Yeah those expanders aren’t the greatest. I have the lisle 17350 kit along with harbor freight 10ton hydraulic pump with knockouts. The ram bolt threads right into the lisle kit. What you have to do is put the expander in stretch the pipe a little and than rotate and expand a little more to get it to size and round.

@AndreS_-df2nw 4 года назад

My experience with it as well rotate about 45* and the pipe turns round with a mild second stretch.

@slim56 4 года назад

I had a harbor freight one years ago. That stripped out on the first use. Didn’t get the job done.

@JustinDowDIYcentralhighway 4 года назад

Slim56 Yuppers. I saw J Young put one to the test. HFT Pittsburgh Fail

@johncook8402 Год назад

It does specifically say, in the instructions, not to use impact tools on the expander sooo lol

@billbeckett1021 4 года назад

Too much power on that Milwaukee cordless if you ask me!

@nicolasmendez6781 2 года назад

That's what I think

@scottdowney4318 3 года назад

I dont think I would trust anything like that expander to work at all like that. I have used them to straighten out clamp ridges so pipes can slide back in. Rent it from AZ. It HELPS a lot to take a hammer and whack on the indents and tighten again and whack again to straighten out the ridges. Dont use an impact wrench. Use a hammer and socket wrench

@Gregg0112 4 года назад

Haha same thing happened to me. Didn’t even work once

@bryanw6850 4 года назад

That was 100% operator error

@patracy 3 года назад

No grease. Using an impact on something that shouldn't be impacted. Lastly, you're trying to straighten out a crease which will certainly cause it to fail, if you'd have not put the weakest point of the tool at that crease it'd have held up a lot better.

@twiz8789 4 года назад

I despise exhaust work. Not sure why, but I do

@btrswt35 4 года назад

Me too. It's because no matter what I do, things don't fit right, it either leaks, or ends up coming apart regardless of how tight I make the clamps. Luckily I don't do it for a living and avoid it like a plague on my own car.

@JohnAntikainen 4 года назад

The whole of the large end of the tool is supposed to be inside the pipe. Mainly just need to make sure those 2 rings and as much of the pieces that expand are inside the pipe. I have one of those as well.. But I paid I bit more than $30 for it.. :) I bet the Mostbest brand Expander tool is made from Chinesium. And not the good Chinesium.

@watajob 2 года назад

Nice tool as long as you're using them on mild steel. As you found out: no go on stainless.

@JustinDowDIYcentralhighway 2 года назад

Good tip!

@youraveragetradesman1613 4 года назад

AutoZone maybe would have one

@michaelgentner6130 Год назад

Your supposed to use a ratchet so it doesn't over do it

@PnwOnTour 4 года назад

I just give the pipe a dirty look and it expands.

@JustinDowDIYcentralhighway 4 года назад

Gmguy3car 🤣🤣🤣🍻

@earlcousins6635 4 года назад

Quality wins over pricing - MOST TIMES.

@prior8t2000 4 года назад

I feel that you pushed the Tool further than it would handle it's limits.. I don't think it would have broken down if you used it on a Import Vehical than a American made car. That's jus my opinion...

@farta63 4 года назад

Tive o msm problema

@AndreS_-df2nw 4 года назад

Those suck! They only attempt to make a tube round again, and if you put real power to them, they break as demonstrated. The Lisle exhaust expander #34400 actually works, it has a slower ramp rate & you need extender collets for different size pipes... But this tool will actually stretch the pipe, with a little practice you can make nice slip joints... You can buy a set that will work with tubes up to 4.25" They also make proper tools to make the tube round again for clamping #32509 & #32750. (What you did here) Less throw-away tools.

@toyota4x4legend 4 года назад

I stripped the cheap bastard I bought. I wish I could find a different portable solution like a hydraulic version.

@mathieugendron5865 3 года назад

www.amh.ca/english/benderproducts.html

@blueovalfan23 3 года назад

just a thought, maybe cut a slit in on each side so it requires less force to open. heat would be an option as well. i'm thinking i'll take that gamble as i can always return it to hf, where i'll get one, if it's it's junk.

@billrowe4r 4 года назад

Was it because it wasn't in all the way?

@patrickcallahan2210 4 года назад

I was wondering the same thing.

@JustinDowDIYcentralhighway 4 года назад

billrowe4r Unsure. I put it in as far as I thought it needed to be. 🍻👍

@Serious3D 4 года назад

It broke because u didn't have it all the way in. With that being said ones designed like this are garbage no matter who makes it. My suggestion is look at the Astro Pneumatic 78835, there are other companies that have a design like the Astro one, not sayin Astro made the design but just using it as ref to the style to buy. Lisle and the main tool truck companies should have one with the same design.

@madeinusareviews6234 4 года назад

Amazon has probably like 500 choices with reviews lol, Next Video * Harbor Freight Exhaust expander Is the best! 😂

@JustinDowDIYcentralhighway 4 года назад

MadeInUSA Reviews Actually J Young Already did a Review of the Exhaust Expander from Harbor Freight and it took a Crap 1 time use as well. Go see it for yourself

@donalddunn7362 3 года назад

Maybe because you shouldn't be a mechanic and using the tool wrong it's supposed to be all the way in the pipe not something was sticking out that's why the tool bent on you

@damoblake6000 Год назад

USER ERROR! NO GREASE AND NOT IN FAR ENOUGH!!! OH SHE ALSO SAID THIS TOO!!!

@johnwolf1475 4 года назад

U voided the warranty by beating it... 😂

@JustinDowDIYcentralhighway 4 года назад

John Wolf I don’t think it has a warranty. $30 for 3 pc set. Probably 30 day warranty. Too late now.🤣🤣

@josbinyoface6276 2 года назад

( 🤔 USER ERROR 🤦🏽‍♂️ ) that’s why I don’t take my car to mechanics anymore cause they never do the job right.

@nathanwatts730 2 года назад

Lol it made a good hammer

@MRSOMTHINBASIC 4 года назад

Try harbor Freight one lol

@JustinDowDIYcentralhighway 4 года назад

MR SOMTHIN BASIC J Young did a Video awhile back. The Harbor Freight Expander is also a one time use.

@HomeMadeBoards 3 года назад

Heat the pipe with oxy or a heat gun. Lubricate with wd-40 or rubber grease, Not moly as it will eventually deteriorate the o rings. Doing 3 turns and rotate, rinse and repeat till you reach the size. Make sure over 50% of the tool is inside at all times. You didn't rotate the tool and over tightened it. Tool works fine.

@jawharris Год назад

It's your fault for not inserting it far enough.

@chemicalspore 4 года назад

you were too calm, I might have been swearing.

@JustinDowDIYcentralhighway 4 года назад

Well.. It was only $30 and I've had it for over 3 years. Maybe it's like milk and it goes stale from sitting. lol

@chemicalspore 4 года назад

@@JustinDowDIYcentralhighway as long it doesn't give you the runs

@502beezy 3 года назад

😂😂😂 you didn’t use it rite 😂😂😂 but what do I know

@briman113 4 года назад

👍

@fasttimes6346 4 года назад

Last...... USA Stock.... made in China ?

@elpandatowtrucker4746 4 года назад

Harber freight

@JustinDowDIYcentralhighway 4 года назад

El Panda Mechanic Also garbage. One time use. J Young did a Video awhile back.

@elpandatowtrucker4746 4 года назад

@@JustinDowDIYcentralhighway you think Northern tools sell one

@Albertotron 4 года назад

In the words of AvE, GAABAGE!

@russellkeys3937 Год назад

It's really old

@micahhill4786 4 года назад

Cheap 🍻😂😂😂😂😂 that’s all I got to say

@gsollars70 Год назад

Not supposed to used with an impact gun and you are supposed to have it completely inserted...if u leave some it outside of the pipe it is going to break duh.......LEARN HOW TO USE THE TOOL RIGHT INSTEAD OF SAYING ITS JUNK!!!!!

@georgeroberts2227 3 года назад

I don't think it's meant to be used with an impact gun.

@xephael3485 4 года назад

Did you follow the instructions? You're not supposed to use it with impact guns! You can also not use wrenches. Hand tighten only! j/k. 🤣 What a piece of junk