There is a very good video here called "Bandsaw Clinic with Alex Snodgrass" . It is the best tutorial that I have ever seen. In it he explains why planar alignment of the wheels is not important. They are designed to be out of alignment. Having said that, congratulations on the good video and the work that you have done in improving this machine.
I always learn so much from your videos no matter what the project is you are working on. Your intelligent approach to problem solving as well as your pragmatic approach to getting the job done is inspiring
My absolute favourite RU-vid woodworker. I am humbled in the presence of such greatness. Words fail me. Its like everything I thought I ever knew pales in comparison. I am not worthy to witness such greatness yet something draws me back, an irresistible pull. Many have tried but none can match that exquisite quintessence of all that makes the Wandel woodshop special. Nobody Does Bandsaw like Matthias. He is the God emperor of bandsaw wisdom. His competitors are as dust and ashes in comparison. Teach me Lord Mathias in your ways. I will no longer fear those who dare to question your word. Stand back you dogs ! Speak to us master.
I have never done any type work that relates to your videos (I'm a scientist), but for some reason I enjoy watching them. I've been subscribed for over a year now and I still get happy when I see your videos pop up in my subscription box.
I wasn't looking for such a good education, but I got it anyway! Excellent breakdown of all the parts of a simple bandsaw... much easier to see the things that can go out of whack. Thanks!
I also received a small cheap band saw for free because my uncle found it to be more trouble than its worth. thanks to you its running very well now, looking at all your videos gave me excellent insight into how these tings should work. For the pulley tires i just used a hard leather strip which i milled into a crown and that seemed to work well.
I have a cheap bandsaw that needed a new tire but it is not worth the $30 + shipping to buy "proper" replacements. I went to our local thrift store and purchased solid leather belts to make tires the "old fashioned way" (?). The leather was 5/32" thick and the belts were $1.00 each. I can get two tires strips from one belt and I cut them to fit between the ridges of my band saw wheels. I glued the leather tire to the rim with a silicone type adhesive (Shoe Goop), rolled the rim so that the tire laid evenly around the rim, taped it to hold everything in place and left it 24 hours. I then installed and tested and it worked great. I did not bother crowning as the other wheel is crowned and it was easy to track as is. Time will tell if all stays well but the repair was cheap and easy and that is what I wanted..
Finally, after all these years, I finally found someone more meticulous than myself. Enjoyed watching you work. I like the precision you strive for. Keep up the good work, and thank you for the video.
I just got a three wheel 16" Delta band saw ( cast iron frame ) and after I found some tires for it I found it set up really well. I had one of those band saws from CT...I'm happy to say I chucket in the garbage. I enjoy your videos Thanks
I just used your tip on electrical tape to fix my bandsaw. I picked up a larger saw for free but it had no tires and no motor. I have plenty of adjustment travel so the number of wraps was not critical (it runs a 78 inch blade). Even so, I used three wraps and it works great! I also have the same saw in your video made by Ryobi - another freebie from a retiring co-worker. He used silicone to make his own bandsaw tires.
I have a bandsaw that my dad left me when he moved to Az. and it's missing that bottom wheel rubber piece, I'm going to try that with the tape. Thanks for that idea. On a different note, after seeing this video, I decided to check out my other bandsaw that looks like the one you have here. It never seemed to cut right and I discovered that about 3yrs ago I had put the blade on with theeth facing the wrong direction, points up, not down. Cuts great now. Thanks for the video... LOL.
Thanks, I learned from this video. I recently purchased a 10" Craftsman Band Saw at a yard sale. It works but I seem to throw the blade easily. After watching this video, I went out to the garage and examined the blade guides. The lower guide had the left side completely missing and the right one loose. That explains that problem. Now to replace the blade with more set so I can make tighter curves. Thanks!
Totally love your videos. For getting the wheel running perfectly round you should consider using a grinding attachment for a dremel (or similar) and grind the surface while the wheel is spinning. That should eliminate the wobble almost completly.
this was one of the most fun and awesome videos I've seen regarding refurbishing power tools. I got the 9 inch Mastercraft at a garage sale this weekend and it had poor and busted tires. Going to try the electrical tape tomorrow Very nice vid!
Loved the tuneup. I have a ten inch Sears that could use a tuneup just like this. Just a tip for the shim you mounted. A touch of thick grease or vaseline will stick the shim for truly blind spots making it a lot easier to deal with. Great vid!
Thanks for clearing that up. The squishiness makes the tape not suitable (it's under constant pressure when the bandsaw is stopped), and the price not cost effective.
wow, the cutting tool incident scared me slightly. but hats off to you sir, you put a lot of time and effort into getting the saw to run correctly. thank you for the suggestions and ideas to tune up my P.O.S. Ryobi 9inch(22.86 cm) band saw.
Hi 12345NoNamesLeft, I agree. I've made aluminum washers just as you've described several times in the past. Very stable and works great. Matthias is a RU-vid icon, no doubt. But, I have to say this... The process he used to remove metal from the lower pulley/wheel on the band saw is called "Turning", not Milling as he stated in the video. His first attempt at turning is called "Gouging". ;o)
Someone dumped one of those behind our warehouse and the only thing wrong with it ' was the lower wheel belt like yours. I have a 12" band saw so I make my craftsman into a 1" belt sander which woks amazingly well. I may modify it so I can use bigger belts and cut them into 1" strips (saves money). Always enjoy your videos. Cheers
another thing that would have worked good for removing some material on the wheel would be a thin strip of emery cloth(or even some sand paper on a wood block pushed in there), being an aluminum wheel its soft enough to sand down. Matthias you are a true icon in the field of fixing and re-purposing tools to make a more accurate instrument. truly something that has been lost it seems over generations as todays society says "if it doesnt work right throw it out!".
when you go to mount the motor with the upper bolts holding your shims, use two long studs in the bottom holes to start your motor in alignment in the bottom holes and it will all lign up. if you had to shim in any other plane use the longer bolts in the un shimmed holes. best of luck Matthias!
Hi.....like this helpful video as I'm very practical too. I've just ordered a Silver line bandsaw at the cheapest price....looks just like this one. will be using mainly for shape cutting no more than half inch to an inch thick. will be putting a Draft blade on as soon as it arrives. I have number of lower priced tools that do perfect jobs! thanks once again for video.
you can put your plastic "shim/washer" material between two pieces of wood and drill straight through instead of using the hole puncher....just an after thought.
He is talking about "tooth set". If you look at most saw blades, the teeth protrude out of the plane of the blade body. This has advantages by clearing chips, and preventing heat build-up from friction as the blade body passes through the wood. It also allows for curves to be cut, since the set of the tooth allows it. Since "tooth set" increases the width of the cut, and hence the load on the motor, saws this small often don't have much tooth set on their blades.
Great video Matthias! I also use a benchtop bandsaw Metabo 5378c, and just as your saw, mine gave me that much trouble getting it to run. I replaced the shredded tires with kork, but that ofcourse took away the wheels crown (cant use tape because then the blade is out of the guides reach) . Also the blade guides are adjustable in any direction and it seems impossible to figure out the proper settings. I'm sooo looking forward to build a bandsaw of your designs, so I know what I am dealing with.
We were using duct tape as a tire for a 8ft blade bandsaw for about 6 months. Its however a metal sheet cutting bandsaw so it only spins at about 130-175sfpm. It was fine though .
I believe RentAnEducation means self vulcanising tape. You stretch it and it starts vulcanizing (rubber starts polymerizing) and so becomes one solid body. I have used it to cover mast spreader screws with great success
Thanks a million! Haven't viewed it yet but had to mention my MC bandsaw purchase yesterday, cuts veer badly to the rightso this video couldn't have come at a better time. I tried everything and finally solved the problem by altering the kerf on one side of the blade!! I'm afraid watching this video will make me feel quite dumb...
i have similar saw from maybe 5 years, and really is no bad. 350W 240V motor, 1450mm blade. I cut lot of briar wood on, and is tough staf. I uses it to make some curves cuts you can see some on my fb kropiwno 47 and JSG Pipes art sites, and is no bad. I often need to make some small repairing but work good enough.
I am unfamiliar with Harbor Freight Company, but Canadian Tire is a kind of general tool, Automotive, and Hardware store. They specialize in Automotive parts, Tools for automotive and Woodworking craft, Plumbing and Electrical, Kitchen Wares, Gardening stuff, Fishing, Hunting and Outdoor activities. Kind of a generalist place thought, nothing exceptionally high quality, a moderate selection, and they don't sell major building materials. It's a good place for the average handyman to go.
The tape he's talking about, (I think), is actually silicone. I use it for taping up a florescent bulb I use at work. I've found when electrical tape gets hot the adhesive lets go and creates a gummy mess when you try to re-tape it. So if heats a concern for you it's worth considering. I've seen it for $10 - $20 a roll from Uline, or MSC It is thick and squishy so the blade may dig into it and shred the tape though.
Harbor Freight in US is more like Princess Auto in Canada. Canadian tire is leaning more towards housewares and general merchandise, more like Sears now than the hardware store it started as .
When fitting the shims ,a piece of tape onto the shim either side would keep it in place without altering the shim thickness.Still proceed with the bolts through first but now you won't push the shim off as easily.
I also did all you have done and more. That 3 screws are not enough or not needed. It's a real bad design though I did use it for years for aluminum mainly. I also removed the 3 6 mm bolts and made a new shaft with a wider spacer. No matter what I do, I rum out of patient before I fix it. May be its time to buy a better one.
when you use the dial to check wheel maybe mark area thats low and put on a bit of tape to build up before putting on final continuous strip .Just a thought
OMG I HAVE THAT SAME HOLE PUNCH! I thought I would never see anyone with one like it ever, because all the hole punches in stores are those long black metal dealies. I don't know why, but that made me excited..... :-P
There was a screw hole on the bandsaw case adkacent to where you were using the cutter head. If you had mounted a bolt at that location, it would have made a nice tool rest.
just watched this following fettling a very similar bandsaw. Wish I had seen this video first. I'd noticed that it was not much good at cutting curves but not figured out the reason.
You were doing everything perfect, I was amazed that you do it like that, using the correct tools and then laziness comes around 7:38, nice videos man, I admire the way you work, greetings form Mexico.
Uh.... yeh the place you put the vice grip with cutting tool gets narrower as the wheel turns downward.... use a file or stone and a safe rest and you can grave it even a hack saw blade might do it
Cool man.. I really don't know how you figure all this stuff out, but I wish I could have you over to tune up all my tools! If your ever in the Chicago land area let me know ;-)
nice vid! I just bought a mastercraft 6'' jointer on sale for 150. The tables are not adjustable other than hieght for the infeed, and they aren't completely parallel. There is only one corner that is high by about 1\32''. I end up planing the first half then nothing at the end, (like a wedge.) Im thinking about sanding down the bad spot. I always feel like I'm playing the lottery with buying stuff at CT, but Ive won a few times lol..
turning the wheel by hand? that was pretty dangerous lol I liked it :) ... I did something similar but is spun up the wheel and used some heavy sandpaper and pressed it against the wheel track with a wooden dowel. take care
