Тёмный

Cheap Easy Way To Build Custom Above Garage Door Shelves DIY 

Bros FOURR Speed
Подписаться 353 тыс.
Просмотров 76 тыс.
50% 1

👋 Today We built some custom shelves that go above the garage door. Time to clean up the garage space a little bit now that we are settled in to our new house. I ended up only using 8 2X4's, 1 piece of plywood, 8 big 4in bolts and a pack of 3in decking screws and about 20 2in deck screws. All and all this will be less than $80. Just using some basic power tools like my 4in circular saw, nail gun, impact drill and power drill I was able to cut everything together to make sturdy shelves for the garage. Do you have a garage and don't know what to do with all of the space? Check out our video for a cheap, easy way to build custom above garage door shelves. This project is perfect for small spaces or for adding extra storage to your garage! This DIY project is easy to do and can be completed in just a few hours. Not only will you have a beautiful storage system in your garage, but you'll also have saved money on the project! So why wait? Watch our video and get started on your customized above garage door shelves today! Are you looking for a way to organize your garage without spending a fortune? Check out this DIY project for custom above garage door shelves! This project is easy to follow and can be completed in just a few hours. By building these shelves, you'll be able to organize your garage and save money at the same time! If you're looking for a simple, easy way to improve your garage organization, check out this video!
Ryobi 6 Piece Tool Set
amzn.to/3WxiLuX
Ryobi Nail Gun:
amzn.to/3H5q5Ip
Saw Horse:
amzn.to/3ZX2UZB
Garage Renovation Video: • Turning A Trashed Gara...
🤠 Check Out Our Aftermarket Car Part and Merchandise Website!! brosfourrspeed.com
Our Car Accessories:
www.lasfit.com/
SAVE 10% by using "Brosfourrspeed10" on your next purchase!
Our Equipment:
- Cannon M50: amzn.to/3CTphmE
- Rode Mic: amzn.to/3XTKurs
- Joby Suction: amzn.to/3SCrWZ7
- 64GB SD Card: amzn.to/3bJQwUK
- GoPro Hero 10: amzn.to/3H7eRVK
- DJI Mavic Mini: amzn.to/3uoOfHS
- Apple MacBook Pro: amzn.to/3gSIdMD
- LowePro Bag: amzn.to/3wi1wlX
- Tripod: amzn.to/3cJMAr1
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
Cheap Easy Way To Build Custom Above Garage Door Shelves DIY
Music By: www.epidemicsound.com
#garageshelves #howtobuildgarageshelves #garagestorage

Авто/Мото

Опубликовано:

 

1 фев 2023

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 88   
@kraighawkins2919
@kraighawkins2919 Год назад
Nice job. I like the angle supports instead of vertical on the corners. Makes it look more open and smaller. I may tackle this in a few weeks in my garage.
@paperboychris5390
@paperboychris5390 Год назад
Great video. Nice job utilizing all your space
@amfney
@amfney 4 дня назад
Thank you for this video. it inspired me to build a shelf yesterday! I only did the right side and used 2x3s. Thank you again!
@BrosFOURRSpeed
@BrosFOURRSpeed 3 дня назад
Nice! These have been very helpful!
@ThomasKilinski-eb3hl
@ThomasKilinski-eb3hl 10 месяцев назад
Interesting build, but I suggest strengthening where you attach the angled 2x4 to the garage wall. You have only one bolt going into the stud wall but it is very close to the top edge of the 2x4. Any heavy weight and the 2x4 could split and the shelf will come down.
@BrosFOURRSpeed
@BrosFOURRSpeed 10 месяцев назад
Yeah I've kept an eye on it. So far I have less then 100 pounds on each shelf. It can hold my body weight fine. But if it start to sag at all I'll had something
@davidnilles3117
@davidnilles3117 Год назад
Great job y’all. What a great use of otherwise useless space. 👍
@BrosFOURRSpeed
@BrosFOURRSpeed Год назад
Thanks! Yeah it really freed up a lot! And now when I'm filming in the garage, things look way cleaner!
@vanessawatson6788
@vanessawatson6788 5 месяцев назад
Just completed one side... now my husband wants me to do the other. Thank you for the idea!
@BrosFOURRSpeed
@BrosFOURRSpeed 5 месяцев назад
Nice! We love these! Been very useful for random things!
@sayanchaudhury3728
@sayanchaudhury3728 Год назад
This is awesome. I am planning to do something like this, and this is going to help me a lot. Thanks for putting all the info.
@BrosFOURRSpeed
@BrosFOURRSpeed Год назад
Glad it was helpful! These have been super useful!
@bwrugger
@bwrugger 7 месяцев назад
dude, well done. I wish had a garage as neat and open as yours.
@BrosFOURRSpeed
@BrosFOURRSpeed 7 месяцев назад
Thanks! What size garage do you have?
@SantanaKIlledYa
@SantanaKIlledYa 6 месяцев назад
Just finished mine followed the video to a T, thanks man they came out great!
@BrosFOURRSpeed
@BrosFOURRSpeed 6 месяцев назад
Awesome! We still really like them. Been super usable!
@laurenmorley6691
@laurenmorley6691 Год назад
Love it!
@BrosFOURRSpeed
@BrosFOURRSpeed Год назад
Came out good ;)
@AntLive29
@AntLive29 Год назад
Great idea!
@BrosFOURRSpeed
@BrosFOURRSpeed Год назад
Thanks!
@sebastianvettel1000
@sebastianvettel1000 9 месяцев назад
Good job folks
@BrosFOURRSpeed
@BrosFOURRSpeed 8 месяцев назад
Thanks!
@erikstrieter4233
@erikstrieter4233 Год назад
Was looking for vids for hanging shelf’s but I like these better.
@BrosFOURRSpeed
@BrosFOURRSpeed Год назад
Yeah I thought about the hanging metal ones. But the nice ones would have been like $300. More fun to built it like this and was super cheap
@Static_MK3Focus
@Static_MK3Focus Год назад
I may actually look into this! Gives me a place to put more stuff 🤣🤣
@BrosFOURRSpeed
@BrosFOURRSpeed Год назад
Definitly a good project to free up space!
@iCozzh
@iCozzh Год назад
Great video
@BrosFOURRSpeed
@BrosFOURRSpeed Год назад
Thanks!
@frankbullitt4556
@frankbullitt4556 9 дней назад
great idea
@BrosFOURRSpeed
@BrosFOURRSpeed 9 дней назад
Thanks! Yeah these have been great!
@625jeffrey
@625jeffrey 11 месяцев назад
Awesome shelves. Im doing the same thing
@BrosFOURRSpeed
@BrosFOURRSpeed 11 месяцев назад
Thanks! I really like them. Been very handy!
@NissanAltimaGuy
@NissanAltimaGuy Год назад
Very good home diy project thank you for sharing!
@BrosFOURRSpeed
@BrosFOURRSpeed Год назад
Thanks! Came out really good and the garage is so much more usable!
@bordeauxdogred
@bordeauxdogred 5 месяцев назад
Nice motorcycle 😉
@BrosFOURRSpeed
@BrosFOURRSpeed 5 месяцев назад
Thanks ✌️
@amill1563
@amill1563 Год назад
Now you have a place to sleep when you have an argument.
@BrosFOURRSpeed
@BrosFOURRSpeed Год назад
haha I do fit nicely up there!
@TheBrookerFamily
@TheBrookerFamily 9 месяцев назад
I would recommend buying a pocket hole jig! Great build.
@BrosFOURRSpeed
@BrosFOURRSpeed 8 месяцев назад
For what?
@TheBrookerFamily
@TheBrookerFamily 8 месяцев назад
@@BrosFOURRSpeed pocket holes provide stronger joints, a better looking finish, and won’t split wood. It’s perfect for this type of project.
@BrosFOURRSpeed
@BrosFOURRSpeed 8 месяцев назад
@@TheBrookerFamily Drilling pilot holes would do the same! Being above the garage, not too important for that! Inside the house I could see!
@alchingon
@alchingon 21 день назад
@@BrosFOURRSpeed grab some new drills while getting the bits. Lol cool idea btw. Would’ve never thought of storing stuff up there.
@arkadandfortuna1582
@arkadandfortuna1582 8 месяцев назад
Great job! I’m curious to know if ther is ample space to do any maintenance/repairs on the drive chain unit. Other than that, it’s awesome!
@BrosFOURRSpeed
@BrosFOURRSpeed 8 месяцев назад
If I had to replace the garage door springs, I'd probably just remove the shelves. Easy enough to do if I had to do that. Garage door motor and chain are all perfectly accessible
@javi10872006
@javi10872006 4 месяца назад
Probably would’ve painted it before mounting but overall great job. I wonder if I could build something like this but with vertical supports to the ceiling and use it to store my spar elumber
@BrosFOURRSpeed
@BrosFOURRSpeed 4 месяца назад
It was easy enough to paint once done honestly. But very helpful shelves! I've sure you could make a support to the ceiling
@Aydansmamma
@Aydansmamma Год назад
​@BrosFOURRSpeed - How much weight do you think this would hold? Also, Love the video instruction!
@BrosFOURRSpeed
@BrosFOURRSpeed Год назад
With everything bolted in, I would assume a couple hundred pounds! I could hang from it, it’s pretty solid in the studs!
@CHDZ09
@CHDZ09 10 месяцев назад
What kind of horse and 2x4 holder are you using at the 1:22min mark? Could you provide info on it?
@BrosFOURRSpeed
@BrosFOURRSpeed 10 месяцев назад
amzn.to/3PxlDq5 Here yah go!
@user-cr2ng8bp1l
@user-cr2ng8bp1l 4 месяца назад
great stuff!!! Was there anything that required you to make them that wide or could they have been wider?
@BrosFOURRSpeed
@BrosFOURRSpeed 4 месяца назад
I just made them the size of a piece of plywood basically. Cut the plywood in half length wise and fit it since the garage tracks.
@amill1563
@amill1563 Год назад
I always thought it would be nice to have a lift in the garage to make things easier.
@BrosFOURRSpeed
@BrosFOURRSpeed Год назад
Yeah one day I want a lift! Next house for sure I'll be doing that!
@ricespecialist
@ricespecialist 7 месяцев назад
Can u suggest how to make the doors to a solve like this Mariapaula Steel Height -Adjustable Shelving Unit
@BrosFOURRSpeed
@BrosFOURRSpeed 7 месяцев назад
You can probably just make wood doors. Heres a video where I made doors for our closet and laundry room. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-HOGg5yF4agE.html ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-f6JfVOCkiVM.html
@catherineb.gendron2183
@catherineb.gendron2183 6 месяцев назад
I'm thinking to something like this, but on the other side. Do you think it is safe to use it if somebody open the door while you are in the lader ?
@BrosFOURRSpeed
@BrosFOURRSpeed 6 месяцев назад
You wouldn't want to have the latter at these and open the door. You'll get hit. With the door closed is when you would put stuff up there or take it down.
@carinrichardson
@carinrichardson 10 месяцев назад
Could you make this wider? I have a square roof rack for my car that needs to be stored
@BrosFOURRSpeed
@BrosFOURRSpeed 10 месяцев назад
Yeah you can make this however best fits your space. I basically did half a sheet of plywood and it worked for what I needed
@firstlast-yn4qg
@firstlast-yn4qg 11 месяцев назад
with typical door springs that would prevent winding/unwinding them.
@BrosFOURRSpeed
@BrosFOURRSpeed 11 месяцев назад
Maybe. But if I have an issue with the springs I can easily un bolt these and fix the door and then reinstall them.
@JohnDoe-mp1zk
@JohnDoe-mp1zk 3 месяца назад
@@BrosFOURRSpeedI don’t think you have a typical spring
@BrosFOURRSpeed
@BrosFOURRSpeed 3 месяца назад
@@JohnDoe-mp1zk Doesn’t look like it. I’m not too worried about
@TzUuup
@TzUuup 27 дней назад
​@@BrosFOURRSpeednah you have a torquesmaster. That shelf will not be in the way. I just changed my springs out
@BrosFOURRSpeed
@BrosFOURRSpeed 27 дней назад
@@TzUuup that’s cool to know for long term
@imaqtee1
@imaqtee1 Год назад
How tall are the ceilings?
@BrosFOURRSpeed
@BrosFOURRSpeed Год назад
10 ft
@Copt774
@Copt774 8 месяцев назад
Easier to paint before it all goes up, no? Not sure if thered be a concern in doing so thats why i ask.
@BrosFOURRSpeed
@BrosFOURRSpeed 8 месяцев назад
Honestly just as easy to paint after. Won't really make a difference
@trainfan66officialchannel
@trainfan66officialchannel 5 месяцев назад
this is bros fourr speed out of context
@BrosFOURRSpeed
@BrosFOURRSpeed 5 месяцев назад
Lots of people like home renovation projects. Plus this was garage related.
@omahaikk2191
@omahaikk2191 11 месяцев назад
Angular torque not a good idea! Your weight will put more stress to the 2 outmost screws held by the wall through side supports. Better to have it held straight up to ceiling, of course, to a stud.
@BrosFOURRSpeed
@BrosFOURRSpeed 11 месяцев назад
Yeah I thought of that. But thats why I did the big bolts through the 2x4 into the studs behind the wall
@mileslynch
@mileslynch Год назад
Who else noticed his wife on the shelf
@BrosFOURRSpeed
@BrosFOURRSpeed Год назад
haha your the first comment on that!
@murderbeam9614
@murderbeam9614 8 месяцев назад
With where you mounted it, you basically bought an engagement ring to that Wayne Dalton Brokemaster. You're going to be having the WD techs come put new springs in that bad boy every 3 years lol, no torsion conversion for you.
@BrosFOURRSpeed
@BrosFOURRSpeed 8 месяцев назад
What?? This doesn’t effect the garage door in any way.
@RealityChecker864
@RealityChecker864 Год назад
Congratulations, you just created a garage door repairman nightmare. Just wait until the springs fail and need to be replaced.
@BrosFOURRSpeed
@BrosFOURRSpeed Год назад
This won’t interfere at all. My dad actually just had to replace the springs on his and storage up above won’t hinder that job as he just did it.
@trainfan66officialchannel
@trainfan66officialchannel Год назад
Ugh definitely forget this video
@BrosFOURRSpeed
@BrosFOURRSpeed Год назад
You don't like improving your garage?
@trainfan66officialchannel
@trainfan66officialchannel Год назад
@@BrosFOURRSpeed nope because I'm not an adult lol
@BrosFOURRSpeed
@BrosFOURRSpeed Год назад
@@trainfan66officialchannel haha good reason! When your older you’ll value better home storage solutions 😅
@JohnDoe-mp1zk
@JohnDoe-mp1zk 3 месяца назад
@@trainfan66officialchannelgood answer lol
@jjhewi10
@jjhewi10 4 месяца назад
Why the ear muffs?
@BrosFOURRSpeed
@BrosFOURRSpeed 4 месяца назад
So I don’t go deaf. Why not protect your hearing?
Далее
▼КОРОЛЬ СОЖРАЛ ВСЕХ 👑🍗
29:48
Просмотров 412 тыс.
IQ Level: 10000
00:10
Просмотров 4 млн
Over the Garage Door Wood Storage Shelves
5:56
Просмотров 102 тыс.
Storage loft time lapse
3:07
Просмотров 168 тыс.
Garage Storage Shelves - 161
5:57
Просмотров 631 тыс.
Easy DIY Garage shelving/Cabinet - #Garage Upgrade
14:27
Лучшие АВТО за 4 МЛН
0:54
Просмотров 774 тыс.