Cheap! flow through exhaust Yamaha RIVA RACING KILLER 

Cool!

It should run without a problem all your doing is removing a couple of pipes and baffles doesn't make sense why it would not run correctly

Ya check tomorrow

No only on older Yamaha

Well not exactly the fittings size but the concept should work for a Seadoo Spark

Neno Bracki That's a good thing people will know you're coming

I'm not sure I didn't have any problems maybe you have a sensor on your water Box or somewhere

I was thinking of doing my 2013 VX1100.......did you ever work out what the issue was?

@@mekuranda no I sure didn’t. I’m very mechanical having worked on my own cars and motorcycles all my life. I tried everything I knew to do and researched the internet as well for any similar issues or discussions with this conversion but to no avail. Each time I put the stock exhaust back on it ran perfectly. Weirdest part of it all is I actually removed the spark arrester and air filter/breather both before and after trying this exhaust mod, but the intake mod had zero affects whether the exhaust was stock or modded.🤷🏼‍♂️. Ended up selling both my skis this past Summer. Still have the boot and elbow; be more than happy to send em to you for shipping cost. They’re no good to me

@@edgeprep thank you for the reply. I am in Australia ...not sure if international shipping is viable unless you have a fantastic deal with freight company. I have seen a few vids on people removing the air ribbon filter...not sure why Yamaha put it there, must be there for a reason... safety, flame arrestor...not sure I would want to reduce safety for a little performance gain, but the exhaust is unlikely to reduce safety and might sound a little better, beefier, and have a performance boost, at the expense of quietness...the VX is super quiet in stock trim.

@@mekuranda ah! Yeah, probably wouldn’t make it to you without its own VaX passport anyways.🤷🏼‍♂️. Yeah I regretted removing the ribbon on the intake side after watching a few hull explosion. Definitely had a deeper more throaty tone, but wasn’t worth the risk. Everyone I knew had done that mod with no disaster, but there’s always that one chance. Nonetheless, good luck with everything on your ski. Also, wishing you all the best down there with everything you’re going through; it’s truly been unbelievable from my viewpoint. Sky News Australia is my regular go to for the past year because you can’t trust any of them here in the states. Anyways, stay strong…the world is watching us both! Cheers

Not a 100% sure because I never did one on a 2019

Great no issues

I had no issue with it and i run it every weekend. also I am sure you can find some kind of thin stick on shield to stick on the hull from eBay.

FLORIDA LIFE CLIPS thanks great video by the way

None

Unfortunately cannot answer that question your best bet would be speak to a experienced mechanic

I did try making a video but after reviewing it the sound quality on video was not the same as in person I can tell you it sounds a 100% better than stock.

@@FLORIDALIFECLIPS is it too loud?

Sorry can't help never did a 02

Used to have an FX140, I put a Riva free flow on it, and honestly, I was dissapionted on how quiet it was. However the Riva free flow is plastic so if you use metal i'm sure it would be louder.

daltondrummer was there any performance difference on it?

Honestly it felt slower, all these people think they get gains from making the engine more free flowing but it'll just run worse as its tuned for the stock exhaust. If you get it tuned to the new exhaust sure it would be faster. My old Fx-140 literally blew up right after I put the exhaust on. (No it wasn't the exhausts fault it was just old and leaking oil already. I did a lot of research and there's just so little mod support for the FX-140 that i'd recommend keeping it how it is. Maybe polish it and make it look nice to sell. I got a good deal on a FX SHO 2009 for 6K. MUCH faster, there's no comparison, it scared everyone who rides it with me. If you want to mod, get one with a supercharger and ECU tune it.

daltondrummer you is was slower do to the exhaust did it had an intake also or just exhaust?

I'm interested in noise as well

@@dustinabercrombie8939 i actually done this..was a bitch to get pipes on without and bad bend in them..but sounds good on ground..havent had chance to put in water yet..mine on a 2020 gp1800

links are up

so much thanks

Tim Kerber please do keep this in mind that companies change their sizing all the time I do not know why but they do this is what I purchased and it worked

Tim Kerber just please keep in mind again companies change their sizing I do not know why they change the sizing but they do

thanks anyway, you helped a lot ;)

Rick Puzio sorry out of town till Jan. I will let you know when I get back.

I do not know the length it is whatever length they come in I did not cut anything.

Sounds good thanks bud. I'm guna do this on my O7 waverunner FX HO. Hope 🙏 its a good mod

Yes

If the exhaust setup is the same yes

@@FLORIDALIFECLIPS thanks were can I find this stuff to order ?

Do you know the length of the 45 degree pipe

Ebay inter cooler turbo pipe

What is the length of the 45°?

@@kello236 I believe 12" not sure have not done this mod in a very long time

Can't tell you never done a 2013 I'm thinking it should work but you might wanna do some measurements.