Amazon cheap screen printing press and flash dryer. Is it worth it, take a look and deside for yourself. It will work if you are on a very stricked budget.
Iv been screen printing for years and got one for 1 colours. Having experience allows me to do multiple coloured jobs on it if I have to. Experience is big when it comes to these cheap presses
You have it setup upside down. The springs go close to the screen holder. The tensor goes in inverted from the other, the fish hook gets inserted away from the other.
Don't give up on it that easy, I have the exact same one,all u have to do is adjust the turnbuckles (ON BOTH SIDE/ SOMETIMES SIMULTANEOUSLY)..... try with a screen in it and without.
I just put one of these printers together last night. I simply put the turnbuckles on the turntable side, and the springs towards the screen. Simple fix. They stay down fine.
Get a heat press and once your shirt is dry to the touch from your flash unit jus heat press them...They will be cured with plastisol inks...May help you save some time
Hey Thomas, to fix the issue you have @7:50, flip the set up put the spring at the top where the screen slide in and that way you will have clearance at the bottom. Hope that helps
I think you have the springs upside down i watch someone else video and they actually set it up on camera and put the springs on the other way. you almost changed my mind .... good video though you should do an update video with it switched
Hey! ThomasDaniel change the springs to the opposite side, IE un attach them and put the springs where the screens get attached. Might work a it better..
Let me know, founder@cncmakersspace.com cause I am trying to get started and have a similar one but mine doesnt have the springs it uses magnets. I picked up a bundle from a guy for 350. but am not started yet. working on a conveyor dryer diy build first..
Dude just turn your spring hooks so they're on opposite sides of the eyelet. I had the same one and that was my fix for this issue. No offense, but are you really mechanically inclined? So many people have the same complaint about this issue I resolved it on the first go. What's the deal?
My tabs were all similar enough sized to not need it. But you need to set bearings based on the smallest tab. Then file the big ones down with a cheapo file till they barely fit
Thanks so much for your honest opinions, I’m watching your video with my business partner and we have fallen in love with your sincerity. You have helped us figure out what the $&??? To do with this half working equipment that we ordered (exactly what you did!). So just a shout out to you for being there for us! Keep up the good work and stay true to you- we can feel the positive vibes and kindness all the way from San Francisco, California...
Being mechanically inclined has nothing to do with knowing names of things. I've been a locksmith for 25 years so you can say I'm as mechanically inclined as anyone. But just getting into screen printing, don't know the names
I have the same flash dryer. I have a problem, i connect it to an outlet connected to the wall, after bout 8 to 10 minutes the outlet automatically turns off . How do I fix that problem
I started the same way..I had a shocker 4 color 4 station press from NeverTheLess ScreenPrinting, never could get it right, sold it on craigslist. Pain in the ass. Great video brother!
I have the same screen printing Machine and i manage to get all 4 arms to stay down. the only issue i am having is setting up that gap that is needed from the screen to the T-shirt palette when screening. it supposed to be the gap of a quarter but for some reason, i can't adjust that. if you know how to please do a video about that. thank you!
Jeovanny Estrella Head over to your local big box home repair store (I have Lowe’s and Home Depot). Get ourself a 18x24 piece of 1/16 plexiglass. Lay that on your pallet, level your screen to the plexi. Problem should be solved.
Jeovanny Estrella you adjust it by bolt where you insert your frames. Loosen it and push it down or adjust where your screen and board are good enough for you. I was baffled when I realize who simple it was to adjust.
hello Jeovanny I wanted to ask you how you made your arms stay down ... I do not know where I should adjust or misadjust ... Would you be so kind as to send me a picture of the octopus or tell me how? I feel sorry for my English.... Thank you very much!
I said to myself... One more F'ing "Um" from this dude and, "Um" he is done. 20 secs later and like 10 "Um" I am "Um" annoyed as fuck. And, "Um" "Um, Um Um , Um, Um. Bye
I🤣😂🤣it is so obvious, it's sad that u can't see the mistake u have made, play logo more often to develop necessary mental skills, apparently it helps develop cognitive abilities 🤔😂😂😂