Chemical dipping a 1966 Pontiac GTO

Подписаться 506 тыс.

Просмотров 123 тыс.

50% 1

Today I’m taking you through the process of stripping this 1966 Pontiac GTO down to bare metal prior to its restoration!
I am using a proprietary 3 step process
Step 1 paint removal in an alkaline bath.
Step 2 rust removal in an acid bath.
Step 3 applying a water based rust inhibitor.
After every acid dip the car is neutralized in our alkaline to stop from flash rusting.
Business name: 3s chemicals llc phone# for scheduling or quotes (814) 749-9015
For social media related sponsorships or collaborations contact me at trevormalloy2121@gmail.com
#gto #pontiac #pontiacgto #oddlysatisfying #clean #pressurewashing #powerwashing #restoration #paint #rust #classiccars #classic #satisfying #restoration #cars #classiccars #transformation #beforeandafter

Авто/Мото

Опубликовано:

3 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 152

@mojorocketman 4 месяца назад

I know paint stripping and rust removal is your thing, but it would be nice to see a follow-up on a few of the more interesting cars further down their restoration process.

@mikeinla6922 2 месяца назад

Good call, even just a picture of the final painted and finished car

@25vrd48 Год назад

Dipping a body and sheet metal is worth every penny it cost to dip . A buddy had his 59 El Camino dipped and wow it was in such great shape . When we picked up the El Camino there was a 55 Baby Bird that looked awesome to us , but the owner thought it was a piece of junk just because of a couple of pin hole rust spots . Interesting thing about the Baby Birds , the front sheet metal is brazed onto the body when they were manufactured as we saw on the body . Awesome video .

@minute_of_dangle Год назад

Thank you!

@theschmitthaus6208 Год назад

I have had numerous bodies and parts chemically stripped using this process. I highly recommend it BUT you must have the body/ parts e coated after the dipping process. As mentioned in previous posts the areas that are not readily accessible by the normal spray primer process have to be protected from future corrosion. The e coat treatment gets into all the areas that spray primer cannot. Do it right or don’t do it at all!

@99skychief Год назад

This is the best looking GTO body, 1965-1967 that I have ever seen.... the owner is going to be beyond happy!

@minute_of_dangle Год назад

Definitely the best I’ve seen too! I’m sure they will be super pleased!

@gordocarbo 2 месяца назад

@@minute_of_dangle Nice job! did it the old school way before these services came about. Elbow grease and lotsa glassbead.

@JohnnyAFG81 Год назад

The goat gets a soak! Looks like they cut out the hole for the shifter with a blunt axe!

@kaidzaack2520 Год назад

Brute force engineering…🥴

@JackF99 Год назад

Original automatic car that at some point in the past was converted to stick (via axe)?

@kaidzaack2520 Год назад

@@JackF99 Dunno…but a manual shifter needs more space. Automatic “I” - Manual “H”…🤷🏻‍♂️

@JackF99 Год назад

@Isabella-tf1qc Oh now I get it...Allah cut that hole. Dude rocks with an axe!

@minute_of_dangle Год назад

Lol yeah definitely a little rougher than it should have been

@Moose897 7 месяцев назад

I love watching your videos. I'm not sure where you are from but I'm in Pittsburgh, PA and I've never seen cars dipped and cleaned without much rust. None of my 1960's cars would have come out of the dip. I think all that would have survived most of my cars would be the roof,A pillar and B pillars

@hemiorange7210 Год назад

If the owner is going for a stock rebuild, the factory markings were visible on the firewall after the first dip. You might let the owner know so they can replicate them.

@mcode440 Год назад

Take pictures

@hotpuppy1 Год назад

GO AWAY!@Isabella-tf1qc

@ScarlettFire341 Месяц назад

@@mcode440 the pictures are in THIS Video lol

@mcode440 Месяц назад

@@ScarlettFire341 Seriously? You just now show up a year later and giggle?

@kaidzaack2520 Год назад

This and a morning coffee…perfect start in the weekend! Thanks bro! 🫶

@jdl.1234 Год назад

The Goat....I had a Red 1967 GTO Convertible with a 1962 389 engine swap. It was a beast...

@hkansler Год назад

this process is fantastic, the result for a good restoration is excellent, not to mention that it removes all the rust points, I would like to know which chemicals were used in the first bath and what the temperature of the water. Excellent work, waiting for the next one.

@minute_of_dangle Год назад

Thank you! Temperature for the alkaline is around 180f. Unfortunately I can’t say exactly what they are. Everything is proprietary and I don’t have permission to say what they are

@Chopski64 Год назад

It is clean but it will get a whole new floor pan and trunk pan. If it's being dipped they won't skimp the repair. The window rot is so common on this GM BOP line. She should get the royal treatment. Great video.

@Imnotyourdoormat 8 месяцев назад

Owner took that ol GOAT completely apart but left the Ash-Tray in the emeffer...

@bikinglikebecker Год назад

👍👍 They have soap injection on the spray washers, but what about Sand injection? Even on minimum setting having a few grains of sand in the spray would do wonders... even though without sand it is already doing wonders when you spray...

@NandiCollector 10 месяцев назад

*I f enjoy watching these kind of videos. Love to see all that paint, rust and other stuff totally removed from the cars. I just can't explain why I love to see the bare memetal so clean.* 😂😂😂

@NO-background-music-in-videos. Год назад

Really liking the videos.. No music and just work sounds great to me.

@normal450 6 месяцев назад

The ashtray 👏

@BradleyBellwether-oy2qi Год назад

Stunning!!! it be cool if someone brought in an old Buick GS or GSX!

@Thousand_yard_King Год назад

In 1990, I restored a 1958 Chevrolet Apache pickup 3/4 ton with a custom chrome package that the factory installed. It came with a 348 and a four-speed transmission. It had 19 layers of paint, I would have killed for something like this. This. It took 2 years of sanding to get it all off.

@gregorylyon1004 10 месяцев назад

This car wasn't abused and drag raced like most cars we see. It doesn't seem like it was ever damaged either. A very nice example

@jimwiskus8862 Год назад

I loved the ashtray clean up. 😅

@ni_wink84 Год назад

Another great turn out! I sure wish I could do this to my car

@minute_of_dangle Год назад

Thank you! If you ever decide to do it, hit me up!

@ni_wink84 Год назад

@@minute_of_dangle I wish I could, but I’m all the way in southern CA!

@dougalexander7204 7 месяцев назад

300k onward and upward. I love seeing cool car bodies down to their bare metal.

@jimsanders4412 Год назад

Surprisingly little rust!! Amazing for a’66!!👍

@gideontladi Год назад

What a process. Thanks for the videos.

@RS-rn4ox Год назад

Its an interesting processes and chemical stripping is a good way to get to the bottom of things quickly. My question is how do you access the parts of the body that aren't exposed? Wont this cause flash rusting and further rusting to the areas of the body that are difficult to reach?

@timgannon2993 Год назад

I ask the same question... there is so many folded skins and hidden cavities for the acid to hide in. I would not use this process

@sonsoluciones Год назад

@@timgannon2993 A lot of cavities with no access. Maybe if you do electrophoresis at the end, will work.

@joemazzola7387 Год назад

My first car was a 1967 tempest just like that one a 2 door post car that I got in 1974 It was already rusted out especially the rear floors and the corners of the back flying buttress rear window I was a 16 year kid and I had basic tools and no skills or u tube so I got wire lathe that was used in plaster walls I laid on top of it regular concrete lol It worked

@draggonsgate Год назад

Super clean for a '66! Best bud in school had a '67 Tempest (same car pretty much) and back then it was swiss cheese! Where's the roof panel?

@minute_of_dangle Год назад

It was cut and clamped on. Very this sheet metal so it was dipped separately

@minute_of_dangle Год назад

They cut it, we didn’t just to clarify

@JT-LV Год назад

Thanks man. Always look fwd to these vids.

@mrjazzkarabass Год назад

Excellent work !!! 👍👍👍

@jbthor9032 5 месяцев назад

While you are working with the chemicals, do you wear a mask or respirator? Also, can you show how you strip the fenders' doors and hood.

@brianhamilton9392 11 месяцев назад

You have a very satisfying job. How many cars can you do at once? Do you have multiple tanks going? What is an average cost to do this process, i know it can vary from good to worse.Do you add a chemical in the final spray to prevent rusting? So many questions but honestly fascinated by the process.

@chrisplace3024 Год назад

Nice job

@joeroad6618 Год назад

must of had a vinyl roof, explains the roof panel being gone.

@wizardindustriesusa Год назад

You can always see how gorgeous the factory color was right as it’s coming out of the acid.

@AutismusPrime69 Год назад

@ronwalsh Год назад

I was wondering if you ever get cars in that have been cut in half and re-welded. Back in the early 90's I picked up an Aries K car. Good car, I just thought it was funny that it had been made from two cars.

@bobradamus Год назад

Love you, love what you do ❤

@bobradamus Год назад

@Isabella-tf1qc erm, okokok

@xeutoniumnyborg1192 Год назад

These videos are automotive ASMR for this old gearhead.

@jaytei2 Год назад

Why does the roof look like that? Like it's been welded back on before. Was it a convertible before?

@bams50 Год назад

The roof skin must have been damaged. You can see where they drilled out the spot welds, which is how you remove a roof skin, or quarter panel, or floor, etc.

@pecktox Год назад

Man, can't believe how good the metal is..!! Only rust I see is in the back floor board. Pex

@JavierRodriguez-db2vh 10 месяцев назад

I asked a car builder how he felt about acid dipping. He said he’s skeptical about dipping. His concern was metal strength after dipping. I’m personally a fan of what you do. But can you elaborate on this concern

@SteveP-vm1uc Год назад

WOW!!!! That will be a sweet ride once again... Do you do some kind of primer dip there?? Is there such a thing???

@tenbears1648 Год назад

I have a 1978 Mustang II Cobra I need to have dipped like that.

@icyhotmike Год назад

The metal on that car is perfect. It didn't even need to be stripped but I'm guessing they want show quality finish

@ronframe387 Год назад

Just curious, why rope and not a chain or cable? Static?

@tonymorse7178 Год назад

How do you roll over the body shell to wash the bottom of the floor?

@CS-oe8og Год назад

GREAT VIDEO!!! Great car!!! The green tag, is that the job number?

@JavierRodriguez-db2vh 9 месяцев назад

How do stop rust after power washing???

@СпамАнтивирус 10 месяцев назад

Отличный подход к работе.

@wookie76 Год назад

Have you done any AMA type question sessions? I just had a silly thought on your opinions. What's the worst build quality generally beloved car. And inverted, what's the best build car that has the most slander about it?

@stevem7868-y4l Год назад

Most of those pin holes could be tigged, this is a very clean can car,

@t23001 Год назад

Congrats on 300k!

@curiosity2314 10 месяцев назад

I imagine you know exactly what Evapor-rust is made from. 😁

@ElmerJohnson-w9n Год назад

Love waiting your process - how often do you have to change out these tank and install new chemicals

@karlos1060 Год назад

Just a question, when you spray of everything with water and there is some water left on the end of the footage, is'nt that going to cause surface rust? And even more in the parts you can't see like in crevices and so on?

@jimclarke1108 Год назад

Great work bud🤠

@JamesWide Год назад

Amazing job. Where are you located?

@whitedovetail Год назад

Amazing!!

@IHaveASillyHaircut Год назад

Have you ever found dead bodies in the boot of your cars? What do you do with them if you do?

@djmips Год назад

If you are pressure spraying to clean of the residual paint and dip solution, how do you clean voids, like behind the quarter panels?

@engineer6250 Год назад

One of the other channels I watch is a British high end custom shop called Retropower. When doing a strip they stopped using acid dip because the service they were using were not either willing or able to fully clean the voids of acid. They now blast instead. An interesting channel btw, they’re just finishing off a custom built Land Cruiser, a Camaro, a Mustang, a lancia Stratos kit car(!), some custom Escorts, a jag and others.

@bams50 Год назад

Looks to me like they get pretty thoroughly behind everything; then dip it in a neutralizer that gets everywhere the chemical gets.

@nanceeleana 10 месяцев назад

What is general cost of this procedure?

@davidbarnsley8486 Год назад

I was just thinking how good a condition it is in I can’t work out was it originally maroon or the bright red Well done the 300k 👍👍👍🇦🇺

@minute_of_dangle Год назад

I think it was bright red. Not positive though. I’ll have to check and see if there’s a color code. Thank you!

@dougbaker9473 Год назад

Where are you located ?

@brianbloom1799 Год назад

What is the cost of dipping now

@garymenasco5449 8 месяцев назад

What are the green tie wraps for?

@punkmaster98 Год назад

How was it to dip this car? I only ask cause i have a 67 Lemans. Very close to this one.

@arthurmccarron4379 10 месяцев назад

Great. Shape

@Kendallian132 Год назад

Beautious! I have a '62 Dodge Polara 500 which I'd like to dip-strip. Are there any places in the greater Boston (Massachusetts) area that perform this service?

@markharris1473 Год назад

What does it cost to dip a car, truck or suburban?

@macbook802 Год назад

What does this cost?

@justinlundy2375 Год назад

How long do you have after each dip to power wash the chems off

@jadoriffic Год назад

Is the dip hot? I'm guessing yes, based on the steam

@cwskoshikun 9 месяцев назад

Looks like OSHA is not followed in that shop 😅😅😅😅

@tuby6521 Год назад

What about the underside? Wouldn't the body have to be elevated high enough so you could pressure wash the underside of the body?

@minute_of_dangle Год назад

We have a scaffolding rig we put it on. Unfortunately I lost the underside video. I usually show it in videos.

@xaviahmad6368 Год назад

Its possible to remove powdercoating paint?

@adubbelde1 9 месяцев назад

what happened to the roof

@MarkGrudt Год назад

Looks to be very solid

@Jonas_Aa Год назад

Can water pressure dent the metal?

@olejoergenmalm16 Год назад

I hope this is painted red when it's finished.

@Yet1moreUtuber Год назад

Kinda ASMR-ish to watch

@CrippledCowboy Год назад

If you ever dip a '69 charger pls post it!!

@markthompsoncpa Год назад

No rust anywhere?

@EmbeddedEnigma Год назад

yo bro cool videos.

@stevens9762 Год назад

Where are you located

@chrisbanning413 Год назад

What is the solution that they’re dipped in?

@rpkietur 11 месяцев назад

what happened to the roof?

@drcornelius8275 6 месяцев назад

The roof skin was probably removed before sending it out to be dipped. If it had a vinyl roof from the factory it is common to replace skin as they are usually all rusted underneath and not worth patching. Easy job replacing roof skin once the car is at this point.

@stude1953 Год назад

what happened to the roof?

@The_R-n-I_Guy Год назад

Im from Southern Ohio. This car has zero rust compared with everything we have

@zero_to_1000 Год назад

How long can it stay unpainted before it starts to flash?

@minute_of_dangle Год назад

Around 30 days

@zero_to_1000 Год назад

@@minute_of_dangle ah cool thanks dude, will call for an estimate soon

@jadoriffic Год назад

How much does it cost to dip a car?

@JT-rc7vx Год назад

3k+

@塗装屋-u4j Год назад

ashtray！？

@bruceyoung1343 Год назад

Where did your balls go? Why were your balls in the tanks before? LOL

@harryholmberg5311 Месяц назад

wth - wheres the roof ??

@gregorykasper5857 Год назад

Looks pretty sold for 55+ years old

@waldobenero1297 Год назад

🇵🇷🙋‍♂️🎯

@gordocarbo 2 месяца назад

Now go get her galvanized, will be rust free for 100 yrs. Nohting like thick old metal. This body was in real nice shape after all these yrs.

@gregwelch2459 Год назад

Stubborn red paint😂

@skeetert101010 Год назад

Where are you located whats your contact information ? Thanks

@юрий-ш8д5р Год назад

Куда ты отходы утилизируешь от производства

@shoma_99 Год назад

Хороший вопрос, тоже думал об этом) еще интересно, кузова похоже оцинковку проходят в одной из ванн, потому что кузовное железо очень быстро ржавее от смывки водой, вряд ли думаю они пассиватор добавляют при смывке

@jeffo881 Год назад

the roof is completely missing??? you didn't say anything about it????

@bams50 Год назад

The roof skin must have been damaged. You can see where they drilled out the spot welds, which is how you remove a roof skin, or quarter panel, or floor, etc.