Chevelle Coilover Install | Step-By-Step 

Awesome! please send us some pics of your install

Did it make a difference ? Can you describe? I’m considering this kit. Thank you

@@207shenanigans so I have a full suspension setup all around but used shocks with springs. On the road at higher speeds I’d get a floating affect that I was used to with older cars. My car sits a little lower so on the freeway I’d sometimes scrap my headers on the bumps because of how much play was in standard shocks. Well with these coilovers it’s super tight. Feels like I’m driving a new Camaro. Totally different ride.. it was an immediate improvement 🙌🏽🙌🏽

@@mannyllamas4119 thanks

Thank you Manny!

@@AldanAmerican any Black Friday sales to look forward to?

How Townie, Installation typically takes 1 to 2 hours per side on the lift. Final ride height usually takes a couple of adjustments that includes removing the wheels. I have done the coil over kits many times during the development phase of the different applications. The procedure is similar for say a Camaro or a Chevelle so that helps. Having the car on the lift and the working with the trans jack also makes it easier than working on the floor. If you have any questions please reach out to our tech line (310)834-7478

If your lower control arms have the OEM style shock nuts, you can remove these with an air chisel; drill them out to 3/8" or run our coilover kit on top of the nuts. We recommend removing these nuts, drilling out the holes to 3/8" and we also manufacture a lower control arm support plate, part # ALD-39

You have to take into consideration that drop spindles by themselves lower the car 2". That means the coilover shock has to be adjusted for a stock ride height in order to achieve a 2" drop. The coilovers are designed for an adjustment range of stock ride height to 2" of drop. If you use the 2" drop spindles you have the chance of the car being excessively low. If you need help determining the right combination give our tech team a call (310)834-7478 or email us sales@aldanamerican.com

Hi @MacDaddy - Let us know if you're running single or double adjustable rear shocks? If your adjusters are stuck or not working you may want to send in your shocks for an inspection/warranty service. Please give our team a call 310-834-7478 or see our service form here: aldanamerican.com/aldan-shock-service/

@@AldanAmerican thank you for the quick response 🙏 they only have spring tension adjustment on them nothing else

Hello @@macdaddy887 there should be an adjustment knob for dampening. Please give our team a call 310-834-7478 for the best service.

@eddielimon7123 ½” Grade 8 hardware 75 ft lbs 3/8 Grade 8 Hardware 35 ft lbs

@@AldanAmerican right on thank you !!