Chevy / GMC Truck: Crank No Start No Communication With FPCM

Подписаться 912 тыс.

Просмотров 1,2 млн

50% 1

Come along with Eric O. at the SMA shop as he has a look at this 2009 Chevrolet 1500 5.3 that was towed in as a crank no start. It has a code stored in it U0109 for "loss of communication with fuel pump control module." You can follow along with Eric O. as he brings you along and diagnosis the FPCM. We also get to use our J2534 Interface device and do some programming.
Chevy FPCM Vid : • Chevy Truck - P069E, P...
Wells CounterPoint Video Ep.7--Fuel Pump Driver Modules, DM100 & DM103: • Wells CounterPoint Ep....
Interested in stuff seen in the videos or the tools and toys Eric O. likes and uses? Check out the S.M.A. "A-Store" and help support the channel! : astore.amazon.c...
If an SMA Video has helped you out please consider giving using the "support" link on our RU-vid home page. The videos take real time to create and pull us away from real work that pays our bills.
THANKS!
--Eric O.
WANT AN "SMA" STICKER OF YOUR OWN!?!
Simply send and E-mail to SMAstickers@outlook.com including: your shipping address and e-mail address in the text, I in turn will send you a paypal invoice for $5 each USA or $6 each international. Let me know how many you want and as soon as the paypal invoice is paid I will ship them out ASAP! Thanks for your support of our channel!!
--Eric & Vanessa O.
Feel like sending some swag to SMA because you love the videos but don't know where to send it?
Just ship it here:
South Main Auto Repair
47 S. Main St
PO Box 471
Avoca, NY 14809
Disclaimer:
Due to factors beyond the control of South Main Auto Repair, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. South Main Auto Repair assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. South Main Auto Repair recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of South Main Auto Repair, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not South Main Auto Repair.

Авто/Мото

Опубликовано:

24 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 1,1 тыс.

@tomoakhill8825 4 года назад

The thing I like best about these videos is the comment made by Mrs O. at 39:50 "I do have it good, 'cos I married you". Those of us in happy marriages, really enjoy seeing other couples who also love each other. I notice the negative comments from those who have never experienced a marriage like this one. People actually do feel this way about each other.

@paulyboy1951 День назад

I watch Pine Hollow auto diagnostics. It's amazing how you guys can track these problems down. It takes diagnostic equipment that most mechanics don't know how to use. You teach us a lot.

@mindtouchone 4 года назад

When I retired I has 2 ASE Master certificates and every certifications Ford offered, and more and I'm saying this man is GOOD, or as a friend says "good at it!" Anybody in his area needs to take their problems to him. As to prices, people need to understand that it takes a lot to operate a business like his. The money for tools alone is high and a good scanner alone can cost 10k, or more plus there' are more and more tools needed including special tools that may be needed to work on a certain brand of vehicle. On top of that the overhead in NY is astronomical. A good tech like this man is worth top dollar.

@PaulHigginbothamSr 3 года назад

You better believe he is good. Even car companies send their non-functs to him. He is so good I wish he lived near me. Why? Because he is honest. I am sure he has failures but not sure I have seen that come up. His car probably runs like crap that is the way it works

@toddmcclary2820 3 года назад

The shop rental alone will keep you up at night not to mention heat electricity etc.

@Leonarco333 2 года назад

Especially knowing he is honest and up front about it. It’s sad to say that that is getting more rare.

@JamesSmith-xs7sr Год назад

Knewa dude that has 6 of those same "doublecerts"! Tip of the cap sir.

@12volttech5 7 лет назад

The first 21 mins of this U0109 crank no start diagnostics is on point, After that Eric overworked himself. I believe the easier way to check if the fuel pump is the issue would have been to jump the pins for the fuel pump to power and ground on the same harness, Without plugging the harness back into the FPCM. If the fuse pops the problem is either the fuel pump or a short in the wires going to the pump, If the fuse does not pop then the problem is a internal short in the FPCM. Great job with the videos keep them coming.

@hammerhead6537 7 лет назад

I think it is obvious the vehicle industry is dead set on eliminating the independent shops and the DIYer. But thank God for unselfish people like you and the many others that dedicate their time to teach people like me. They are over complicating everything according to their agenda, it is a plan. GREED. Thanks a million for your time and effort.

@Thumper79 3 года назад

I have to say that if I lived in New York state, and I needed a good mechanic you would be the first person I'd come to. That's how much you impressed me with your videos.

@Krillekris 7 лет назад

So sweet of your wife to tell that she has a good life with you Eric O. It warmed my heart :-)

@baxrok2. 7 лет назад

Wow, watching you diagnose things is just awesome. It's not just the diagnosis, but the fact that you do it quickly, and confirm it 100%. Amazing. Thanks for educating and informing us. Most of all though, thanks for sharing this!

@mechantics 4 года назад

If I ran a shop, the "waiting room" would have a television streaming South Main Auto nonstop; first off, it'd help give the customer some impartial insight regarding the extent of a given repair. That, and when I was under the car watching the same video, they'd be less likely to notice🤫

@mauricioalfonso8521 3 года назад

you probably dont give a damn but does someone know a trick to get back into an instagram account..? I was stupid lost the account password. I appreciate any help you can give me!

@chrisbronson5860 3 года назад

@Mauricio Alfonso Instablaster :)

@mauricioalfonso8521 3 года назад

@Chris Bronson thanks for your reply. I found the site through google and im waiting for the hacking stuff atm. Takes a while so I will reply here later when my account password hopefully is recovered.

@mauricioalfonso8521 3 года назад

@Chris Bronson it did the trick and I now got access to my account again. Im so happy:D Thank you so much you saved my account !

@LayZeeDawg 7 лет назад

Thanks for this Mr. O, every video you put up of burned up modules and electronicals makes me want to forget buying anything newer than 25 years old. Control modules, reprogramming, how about relays and fuse boxes? Sounds like just more reasons for the manufacturer to make more money with proprietary stuff by locking us into dealership repairs.

@shorelinearmorllc477 7 месяцев назад

With great technology comes great responsibility

@ethanpoole3443 6 лет назад

I don’t know if you are still following these comments or whether this was already explained somewhere in the 564 comments, but circuit breakers are not ideal substitutes for fuses, as you discovered, because thermal circuit breakers typically take much longer to trip than a fuse, especially in more marginal overloads (for example, drawing 30-50A on a 20A circuit) - even longer still in dead shorts if they do not also include a magnetic trip element. It takes time to heat the bimetallic spring in a thermal circuit breaker, much longer than it takes to melt the thin wire or metal strip in a sacrificial fuse. This extra time to clear the circuit means that wiring and circuit board traces, etc., can get very hot before the breaker trips even though their operating load ratings are identical...and sometimes they will wind up failing before the breaker can finally do its job. That is part of the reason, costs aside, why fuses are used extensively in vehicles since the wiring harnesses are usually of rather light gauge and not really suited to handling extended overloads without overheating. Ideally, instead of using resettable thermal circuit breakers your kit manufacturer ought to redesign to use resettable *electronic* circuit breakers that better mimic the time versus load characteristics of the fuse you are substituting it for as it would then afford the same degree of protection.

@QuantumMind88 7 лет назад

You are a perfect combination between Eric The Car Guy and Scanner Danner. Very informative and fun to watch! Thank you for your excellent videos, they are very informative!

@kellismith4329 2 года назад

You gotta have rainman ray in there too, these guys are all solid technicians

@Shay-it5mt 2 года назад

I love it. Scanner Danner is the bomb and Eric the car guy also

@JamesSmith-xs7sr Год назад

He's the best..He worked on race cars, for 18 years!

@lewiscornine7122 2 года назад

As a retired mechanic of 45 years i worked on construction equipment and municipal equipment in N.J i would of loved to work with you you are a smart Son of a gun but i really think Misses O is your mentor!😁

@forget-me-notlawncare9821 7 лет назад

Another informative video. As the owner of an 05 Silverado, I appreciate this one personally. Thanks for all the detail in troubleshooting that you provide for us all, as well as the needed reprogramming of the new control module.

@robert1975031 7 лет назад

I can say that it's a smell you'll never forget. I have gotten quite a few electronic items, that "Quit working" once I take a whiff of it, and smell that.. the diagnosis is pretty easy.

@38911bytefree 7 лет назад

Love how sealed the module was conseidering its location ... glad they dont make aircrafts

@u.smarshallscommando5924 3 года назад

👍

@baddriversofnorthtexas6850 7 лет назад

Let's all pitch in together and get south main auto a 4K camera and their own internet fiber connection. Not just for weekly videos... But also as a live streaming shop-cam

@wroomwroom2678 7 лет назад

One of the best shows on RU-vid

@DA-zi6eq 7 лет назад

Wroom Wroom HANDS DOWN!!!

@tylerparker3024 4 года назад

This is by far the best RU-vid channel out there. Total quality no b.s. and extremely informative. Glad I found your channel for sure

@EricFortuneJr. 5 лет назад

7:06 That’s the perfect location for any electrical module. Salt, moisture..

@tcpnetworks 6 лет назад

Proof that conformal coating a circuit board does not make it impervious to failure.

@gordonrollenhagen6750 4 года назад

Conformal coating causes more failures than protection, the module and its components expand and shrink with changes in temperature of the board and its components, while the coating resistance to this heat and cooling causes the components soldered leads to break loose from the board. Fuel pumps failures are usually caused by gasoline with alcohol, which attacks the conformal coating on the module and the varnish/coating on the motor windings and armature.

@kellismith4329 2 года назад

Great spot for a fuel control module, thanks gm - I had the same issue with my spare several years ago I needed it out, spent quite awhile messing with it but luckily got it down. I decided that with that setup you don’t really have a spare anyway that you could access on the side of the road so it has lived in my garage ever since - it is a giant rust magnet under there

@donerickson1954 6 лет назад

I Find myself wanting to move back to wisconsin more as I get older. Then I watch your videos and i'm all, nah i'm good. I hate rust.

@robertcale6725 4 года назад

my mechanic days are over and am so glad i can't even make a smart house switch work to turn on a light but glad some people have patience for this

@toddster772008 7 лет назад

No disrespect to Eric the car guy, but I enjoy your stuff way more. I'm a new subscriber I haven't watch a lot of your videos but I really like the way you pay close attention to detail. Wrench on buddy👍up.

@milfordcivic6755 7 лет назад

ETCG seems to have gotten away from the day to day grind of being a mechanic. No disrespect, but payola product review, product placement and Fairmont build vids aren't all that interesting anymore to me.

@BloodStainedTear 7 лет назад

Ima fan I concur and I've pointed this out before ETCG is way to commercialized now it's all about that Fairmont and the sponsors

@justinp8946 7 лет назад

toddster772008 I wish Eric made more " fixing it forward" vids

@kevinwoodcock7578 7 лет назад

I personally don't think ETCG is half the mechanic Dr. O is. He's trying to make a living off of youtube and all the power to him for that. Eric spins wrenches for his money and we are all lucky that he has decided to take us along for the ride. Thanks Dr.O.

@amer1337 7 лет назад

ETCG is a mechanic, but Dr. O is a tech.

@jerryblood9554 7 лет назад

I was watching a video of a guy working on a module underneath a vehicle from Sacramento CA with 180000 miles. Couldn't believe it. No rust whatsoever. Looked like it came off the showroom floor. We in northern Illinois have the same problem as you. My 01 Ranger is dissolving as I type. Thanks for the great video again.

@mrmotofy 3 года назад

Ha I just picked up an 08 with 300k diesel. It lived in KY. That is so amazingly clean under there. But that's why I went south to get one.

@AP9311 7 лет назад

wow, talking about same thing, Ivan did the same thing. he put silicone on the back of the module to seal it from moisture and road film etc. he applied sealant on the connections to further seal the connections to the module.

@paul-gn1wq 3 года назад

@ Eric O. and Josh Benny Hello, Im needing to do something like this for the blind zone alert modules on vehicle. How did this work out? Did he put silicone directly on the board? I've seen some apply nail polish to seal would this maybe work sir this type of application? What kind of sealant would be used on the connections to seal? Just a novice trying to keep vehicle on the road. I appreciate any and all help...Thank you.

@asuto120 4 года назад

I think it was at first a belief that fpcm was the cause of the short circuit .. As long as the car switch is in the off mode .. the fpcm cannot feed the fuel pump without the car switch being turned on..Thank you and everything you offer to your subscribers on the channel

@pookatim 7 лет назад

Astonishing that they put that module where they did considering people use these trucks to tow and launch boats in salt water!

@eddiemartinez265 7 лет назад

The same thing came to my mind boat ramps.

@gregshook1472 9 месяцев назад

Mrs O cooking abilities are top notch, heating soup from a can in microwave, peanut butter and jelly triple layer, she's going all out for your lunch. But just remember she went all out for you.

@moparmania86 7 лет назад

Eric please do a video explaining pcm up dates and software programming of newer vehicles. I have no idea what is involved with all that. What happens if you do not do software updates? Do you have to do them for the car to run right...??? Please please do a video. You are a very good mechanic and I know you know your stuff with this new technology, and old! You are the best of both worlds. So please help an old school guy like myself to understand these things. I am a mechanic myself but have never gotten involved with these high tech things and I find myself more and more falling behind!

@johnboywaltonbeard4699 4 года назад

1. Think about an ohm meter. 2.It only took me 2 days to get my spare down. Then I cut the ears off of that Safety gadget. Added a Ratchet strap in case cable breaks.Thanks Eric O.

@furhawk 4 года назад

Hey Eric you got it going on dude!! If my wife ever looked at me and said "I do have it good, cuz I married you" - - my mind would explode!! 😂 You got it good Mr. O!

@donaldpainter956 2 года назад

Not downing you at all Mr o but I would have cut that cable and got that tire out of my way first thing and unplugged the fuel pump then tested I try to isolate things if I can but you are still the man thanks for the videos I'm a 30 year technician myself and still learn everyday and you are a good teacher always know never assume that's how I was taught 30 years ago

@arciefan 7 лет назад

Next up for engineers, a spare tire powered hoist to raise and lower the tire and also maintain proper air pressure for readiness at all times, complete with it's own control module of course. These should come on line soon after they unvail the blinker fluid control modules.

@HighestRank 6 лет назад

arciefan veil*

@TitanFallDeath666420 6 лет назад

Dr O fixes another Chevy patient and it will live another 10 years after this operation! GG Dr O.

@adventureoflinkmk2 5 лет назад

One can only hope. It's no Toyota after all...

@jamesterrill1938 4 года назад

Good video, your community is lucky to have you to do this kind of work.

@joshuaodowd9107 7 лет назад

If I watched anyone else do this I'd be so lost but you do such a good job of explaining it so we can understand it and I've never really had any clue with electrical diagnosis

@frap6790 7 лет назад

Eric, you're a virtual mechanic-ing Dynamo! Thanks for all the videos, really enjoy them.

@porkchop4604 2 года назад

Eric your hard to find. I've told my 2 years of service mechanic nephew to watch and learn from you. Your the best!

@ouch1011 4 года назад

I got my back door absolutely annihilated by one of these once. Kept getting towed in with as a crank, no start with the same U0109 code. Every time when it got to the shop, it would fire up and run perfect. The truck would run and drive perfectly all day. Seems like the problem would only show up once every week or two, but when it did, it would leave the customer stranded. Always seemed to happen when they would drive it and park, wouldn't restart when they went back out to it. I load tested all the power/ground circuits, scoped the communication lines, even checked the sensor inputs for possible signs of shorting. After spending literally days trying to get it to act up, we discussed with the customer and decided to try a new FPCM. Put it in and programmed, drove it a few days with no issues. Gave it back to the customer, next week its getting towed back in crank no start, same code again, starts right up when it gets to us. The problem ended up being the contact for the 20A fuse on the BOTTOM of the fuse block was burnt. When we finally got it to fail at the shop, we were able to determine that there was a significant volt drop on the main power at the FPCM, but the fuse was fine. Traced it all the way back to the bottom of the fuse block. I have no idea why it would work fine for days and load test perfectly whenever it was at the shop, but man that diag sucked. I couldn't even be embarrassed that it took so long to diagnose it since it would work perfectly under load for several days at a time.

@joeyds 2 года назад

Unfortunately Same situation with me rn just out of the blue… gassed up drove a mile or 2 parked it for 8hrs it, started it to warm up walked heard it idle down and die hasn’t ran in weeks… That’s why I’m here studying everything he does but unfortunately I don’t have all this fancy equipment just a standard “scope on a rope” lol And a basic voltmeter so try diagnosing it without all his cool tools Everything’s a gamble I’m basically swapping parts and looking around wasting time any advice helps thanks in advance

@rogerfossette2097 2 года назад

Each time I watch a video you seem to be using a different scan tool.... Are you that up to date or I am just seeing things....Scanners or the one you learn on is a life savour...

@fielding68 7 лет назад

I was absolutely glued to your video. You'd make a great Sherlock Holmes. Well done and thank you.

@d.j.9961 6 лет назад

Why does Chevrolet need a fuel pump driver module? What was so wrong with the older style, just a group of wires that ran to the fuel pump? power & ground for the pump, & the 2 wires for the fuel level/fuel gauge -using resistance to measure the fuel level? love your vids Mr, O! Sometimes I have to remind myself that there are more video's then just sma vids, That simply shows how many sma video's i watch! love your methodology in diagnosis & keeping it simple & fixing it right the 1st time!

@adventureoflinkmk2 5 лет назад

Welcome to modern times, where as many stupid and unnecessary modules they can squeeze into at once are the order of the day... better sit back, strap on, and enjoy yer God damn stay, cuz it ain't getting any better...

@ericstevenson7696 4 года назад

14:41 "Fuse is still blown" I hate when they stay blown 😂 Love you Eric. And I love the content. I'm laying in bed on this freezing cold day looking at older videos before I found your channel.

@paulkirkland1535 7 лет назад

Hello Eric;I went through the same thing with my Dodge neon just before Christmas. A fault of the PCM necessitated a replacement because the car wouldn't pass the emission test. I had to pay a mobile guy to program the PCM once I got it replaced. Yes the newer vehicles can be a real pain to work on so I see where you're coming from. Anyway keep up the good work and thanks for your informative video.

@gpaine 7 лет назад

Gotta love saltwater + electronics + metal. Nothing like upstate NY. Good job on GM for putting over-complicated electronics in a heavy abuse location on a vehicle meant for abuse situations. There's gotta be one GM engineer who's somewhere in the corporate world going, "I told you fools that location was a terrible idea! Remember that meeting we had in conference room 302 back in 2008?? I told you fools. I told you." Our world needs more people to take a step back and think simply and logically occasionally.

@saxdogg69 7 лет назад

...and after listening to that engineer bitch and moan, he walked to the accounting office and said..."man we're selling fuel pump modules like hot Cakes! I told you! dumbass engineers..."

@leebarnes655 7 лет назад

You might be misunderstanding the situation though. It's the newer better GM retirement benefits package. Instead of boos, that guy has been promoted and they'll be putting all the brains in as many boxes as they can dream up and all of them will be just an inch or two short on enough sealant to actually work. The plan is clearly working well.

@eddiemartinez265 7 лет назад

You know just thinking what about on the boat ramp wow that would kill it fast.

@jottow680 7 лет назад

Greg Paine the TCM in a pt cruiser is put in the wheel well behind the front bumper. It may be silicone potted. But that didn't stop it from rotting out.

@MrManuel1329 4 года назад

GM is a parts company at this point lol

@MrBugzzie 5 лет назад

A thanks for the live diagnosis ,recently dealing with No Comm on few items with my Duramax and have probably read all 7 manuals ,watching you helps confirm The Hands on items as well as GM's format ,it's slowly getting smaller and feeling more confident with putting methods of diagnosing into practice vs looking for the quick and easy spotting a open wire LOL. The comm lines were a handful ,yet benefits are meant to streamline, ..... I think Thanks Again Roman

@jasonwilson8235 5 лет назад

Wow I just had the same prob in my 2014 Silverado. Found the green crusty at the connector. Truck still started and drove but limited me to 10 mph. The cleaned the connection and put die electric grease and worked fine since.

@vincentgotter4669 2 года назад

Have been watching pretty regularly, but the old stuff is always really good. I think both Eric and Mrs O are lucky.

@Autofixpals 7 лет назад

if you put two post Jack's to Hold the tire up quite often you can push that safety latch over and get the tire down with no issues 70% of the time. I am in New Jersey so I know how much of a pain in the butt those tires are to get down.. you have to use a long flat head screwdriver or a slim pry bar to push that latch over with a little bit of effort and persuasion

@tdevinetampa Год назад

Vice grips the most abused tool in the tool box, torched, welded, used as a hammer. Great tool!

@jerryspitler7021 5 лет назад

I really appreciate you bro, i'm just a shade tree mechanic at best but i really like the way you make your videos, some of the best!

@angelinatroiani4809 9 месяцев назад

Weird to watch a video 6 years later. Your new videos highlight the Rona loss of smell. Funny how things change, not salt corrosion but other things.

@gregmonaghan 7 лет назад

"I do have it good, 'cos I married you". Now that's nice!

@joeysmama8701 7 лет назад

Greg Monaghan She just said that cause she was on camera😂😂

@EddieLeal 3 года назад

Smart too. 😉

@onemoremisfit 3 года назад

She's a keeper, aint she?

@MattManProductions 4 года назад

If the Mrs O from the past could see the future kitchen that she has now at the shop... WOO BOY WOULD SHE BE SO HAPPY!

@mikeodonnell3492 7 лет назад

Great job. I like your diagnosis procedures. As another auto professional, I would be interested in the time you charged for the entire job.

@saxdogg69 7 лет назад

I am a proud RU-vid mechanic (despite the pro's jokes haha) and I'll give anything a shot except for the stuff requiring all the specialized programming log ins and scope equipment, etc. The channel has really progressed from the first few videos and you've really hit your stride. Keep on trucking, cuz I know how much work it is to do them.

@Paul1958R 7 лет назад

Great video. I am not defending the poor construction (poor seal) or unprotected location of the FPCM but I do believe that the FPCM must be located very close (ie short wire lengths) to the FP and FPS to accurately monitor/meter FP supply voltage. That is why it is not mounted in the cab/cabin or part of the PCM. I think this is one of those jobs that 'he can do but we cant' - unless you have a $2K programming tool. Paul

@guayaco-dm3vu 7 лет назад

One of many of your videos that I love..Very educational Eric always teaching us something.. Like the amp clamp trick to see where the short may be coming from,need to write that down.

@chungaleta1234 7 лет назад

Another great fix. These electronic modules are exactly what I try to stay away from by keeping my old truck. God knows what I'll do when it finally dies on me.

@mr.h4714 7 лет назад

lol the fuse is "still" blown.......I hate it when they don't unblow

@franksgarageandcustoms8321 5 лет назад

Think i watched this a while back. Gave me confidencd to go into one and diagose it. The torroid coil failed. I bypassed it. No noise/feedback it ran fine. The jumper to test it and make it run was a great help.

@harrycallahan3221 7 лет назад

Watching a video from your channel whilst you are watching a video from your channel. WOAH!! *Insert Bill and Ted Gif*

@SouthMainAuto 7 лет назад

Besides you and I do people know who Bill and Ted are??

@richardelliott3980 7 лет назад

Excellent!!!

@theoldwizard998 7 лет назад

EXCELLENT !

@jix177 7 лет назад

If you really know who Bill and Ted are, what number am I thinking of? :)

@carlinlentz6849 7 лет назад

jix177 69 dude!!!!

@HorsepoweredRims 4 года назад

U moved up to my top videos to watch. Your diag skills are beyond anything i ever learned at lincoln tech or in the field.

@joetiller1031 7 лет назад

Great video Eric, GM's famous spare tire holder that's why I got mine in the bed had to cut it out.

@austincjett 2 года назад

Great video. Try using an Ohm meter to check the pump for a short circuit.

@lyleallred904 7 лет назад

engineers should be a mechanic for a minimum of two years before designing vehicles !!!!

@tedpaszko8274 4 года назад

Yes

@ccoats6 4 года назад

I agree 100%

@scflooring8658 4 года назад

ABSOLUTELY!!!! I’ve always said that too!!

@VTX00128 4 года назад

@Robert Slackware Ha you're damn right Datsun/Nissan are engineering quality control i had three prior cars in my family from Nissan 1982 Datsun Sentra/1992 Nissan Sentra/2002 Infiniti I35 all with at least 250,000 to 500,000 Miles on the odometers' and now respectively 2016 Nissan Rogue and 2016 Nissan Murano the level of engineering and design their products is bar none. As a independent mechanic they are sometimes a pain in but to work on. It's rare that something major to go wrong (Knock on wood) well at least to me. He'll I'm trying to get a hold of a 1970-73 Zed as a project for. my self.

@ozzykrahn806 4 года назад

that will cost gm alot of money.

@haroldb8642 7 лет назад

I watched Ivan do one and he put a bead of silicone around the edge of the new one to help keep water out. Great video.

@jamesh6229 7 лет назад

great! Now I'm going to go out and try to crank down the spare on my Xterra. I don't think it's been cranked down the 12 years I've owned it

@kyferez1 3 года назад

Often power driver circuits are controlled using FETs, especially when it's an on/off or PWM type control. FETs tend to fail shorted, which I suspect is what you are seeing here. The Fuel control circuit probably uses FETs to power the fuel pump, and those likely failed shorted causing the excessive current and blown fuses.

@mikeanonymous669 7 лет назад

Hey Eric! Dont mean to armchair quarterback on you bro but this is from an electronic tech to auto mechanic. Just trying to help save you some time. In this case I would have ohmed out the terminals of the FPCM at the module to ground terminal at FCPM (Not on the wiring harness) then ohmed out at the wiring harness (disconnected from FPCM) ground pin to feed to fuel pump. One of them would have been very near zero ohms and the one that did would be the offending part.

@cmjbrodman 6 лет назад

The resistance on the fuel pump motor wires can be very near 0 ohms and still be good- any where from 0.2-5 ohms measured depending on the design of and how big the motor is in the fuel pump. Resting resistance and running resistance are going to be totally different.

@bunberrier 6 лет назад

This /\ /\ /\ . Found out trying this on my Grand Am. Thank god there was no "controller module" for the stupid thing, just a motor and integrated float.

@lorrinbarth1969 7 лет назад

Every mechanic has his favorite tools. Watching you struggle with the vice-grips I was thinking - little pipe wrench.

@OneAuto 7 лет назад

Another quality repair Eric!!!

@l.m.b1279 4 года назад

We did it. We got our 2009 Silverado running thanks so much for your great video. This took longer because of the cold weather and trying to use windows 10 first. You may have mentioned or some other great RU-vid guy said use WINDOWS 7. I hope this helps other readers. We used Firefox had to get Java downloaded and purchased the Bosch tool paid the $40.00 subscription bought the fpcm and it’s finally running. Good luck everybody because trucks are made to break. Haha 😂

@michaelstoliker971 7 лет назад

Why doesn't GM just mount the module in a bucket of salt water?

@Adam-bw4lw 7 лет назад

more $ from the vehicles up keep

@SouthMainAuto 7 лет назад

Lol or at least in place of the rear mud flap?

@999thenewman 7 лет назад

Time for a fresh JEEP hat yet?

@jeffreykreft5442 7 лет назад

Fords does the same thing, right on the frame behind rear left wheel well, nice place for modules. However, does make it easier to change. Would rather change these then dropping the tank and replacing the fuel pump, cheaper too.

@saulns7159 7 лет назад

There should be a service where all this asshatery gets reengineered or removed, right after you buy a vehicle. Like this moving a computer "indoors", seems like common sense. Just drive straight from the dealer to shop. Call it de-obsolate or unplanned failhood service.

@brucewalkden2634 3 года назад

Just a note to thank you for taking the time to share your knowledge. I have found your videos extremely helpful.

@theoldwizard998 7 лет назад

Returnless fuel was "invented" to prevent excessive fuel vapor pressure (more vapors than the charcoal canister can accommodate) when at extended idle in hot conditions (think traffic jam in Houston in August; roadway >100F). Traditional return fuel system simply add heat to the fuel every trip up to the engine and back. The fuel pump is PWMed, which BTW, actually cause it to run a bit hotter. Here is a cheap alternative design. Install a flow switch in the return line that switches between high and low return flow (with hysteresis). Switching cuts in a dropping resistor, This design is unproven.

@bunberrier 6 лет назад

Thanks, was wondering the whole time why in the heck they wanted to vary the speed of the pump.

@stevenkroot31 4 года назад

The actual reason for the returnless system is to save power (electrical power). The fuel pump has to be sized to provide adequate fuel at the highest demand (I.e. wide open throttle and high engine speed and load). The issue is that at idle and low engine speeds and loads there is way to much fuel being pumped so they throw a pressure regulator and a return line in the system and voila always enough fuel and just the right pressure. Problem is the fuel pump always draws about the same amount of power from the electrical system, about 100 watts more or less. With the returnless system at low speeds and idle the power consumption is about 10-15 watts or about 80-90% savings in power. In these days of corporate average fuel economy (CAFE) that is a lot of energy saved in vehicles that don’t get very good gas mileage every little bit counts, making it worthwhile to put $30 or $40 worth of electronics and wires and sensors in the trucks. Not worth it for the cars which already were much more efficient, not enough bang for the buck. As far as heat is concerned if your not using as much power you won’t be dissipating as much heat. On a return system on a hot day the fuel picks up so much heat in the engine compartment the heat from the fuel pump it is just a drop in the bucket. Just throwing a dropping resistor in series with the pump doesn’t lower the overall system power consumption it just moves part of it from the pump to the resistor. Also to precisely control fuel flow the fuel rail needs very accurate pressure control a couple three resistor steps wouldn’t be nearly enough.

@bobschmaltz4434 3 года назад

. Couldn't scroll through all comments but have good comment. Wait to you get LIGHTNING strike like I did. Very low mileage Envoy with good insurance thankfully. It came into dealer with no com in ALL modules. Me being a little slow took the job and all hell broke loose between me, shop foreman and gm. Insurance Company would not cover repair until I found strike. After about and hour of searching with 2 of other techs I found a small but hot scorch mark on the right rear tire rim. Went to comb for data unplugged and tried to get comm from modules zip!. 6 modules later, up and running no codes present current or history. Patients is virtue but learned a lot from that mess. PS. insurance company paid 100 0/0. And documented the repair. Thanks Eric!

@Taz51590 4 года назад

That remove and replace vs reprogramming got me one time too. Took me about 10 mins to figure out why it kept giving me dumb warnings. I got it whooped though. Good to see other techs that don’t guess are out there. Love your videos. Keep up the great diag work

@thomasniner001 7 лет назад

Wonder how many GM truck owners will try to get their spare tire down this weekend?

@SouthMainAuto 7 лет назад

Haha good luck :)

@donaldfaulkner1435 7 лет назад

Thomas Niner I have been soaking my spare tire safety latch with Fluid Film. Maybe it will operate when I need it, maybe not.

@donaldfaulkner1435 7 лет назад

It is a 2008

@mecheng1993 7 лет назад

Me... Mine really is just a decoration. Doesn't even have air in it haha.

@screamingbeagleproductions1876 7 лет назад

Mine is a 2002 and it actually comes down i don't think it has the safety latch or it is broken.

@tazerface8638 7 лет назад

I was just yesterday messing around with the same issue. I looked at the spare tire and one what you know... no way that spare is going to just wind down. not in New York anyways. I'm originally from corning, nice to see locals on youtube. thanks for the vids.

@Ermal193 7 лет назад

Very good video Eric, Thank You. I would give you 12 thumbs up, to make up for the haters if i could!

@chrisbentleywalkingandrambling 2 года назад

You say you're no electrician but you certainly are. Great explanation, thanks for the upload.

@mrexecutive1 7 лет назад

40:04 "Garbage in garbage out, that's all i know" lol love it.

@mindtouchone 4 года назад

I love work, I can sit and watch people work all day long. Great info videos.

@reinhuberg3581 7 лет назад

Great video Eric.I learned a lot.One thing I would of done different .not necessarly better would be to power the gray wire with my power probe to see and hear the pump turn on.could also use my low amp clamp 0n the probe tip to check draw.looking forward to more of your videos.question I tried to find your video on ford f150 vacuum hubs to rewatch but i cant find it.?

@kellylamb359 6 лет назад

This guy is a pretty sharp cookie, knows his stuff.

@caseknifes 5 лет назад

She is very good to you and I am sure when you are off camera you are a teddy bear.

@jkw427 6 лет назад

Just fyi, the pump is called upon engine crank, or key on for 2 seconds. Once it doesn't see cranking rpm's, it cuts the pump power circuit. So if the key is left on, the pump shouldn't run, ECM already timed oput. The way Ford designed these fuel pump systems is the module (FPCM) controls pump voltage, varying the pump rpm, to vary fuel pressure. Sadly the module was placed in the worst spot, getting road crap thrown on it constantly.

@jimbuford4147 7 лет назад

When your wife said she had it good cause she married you, you should have said I have it better cause I married you. It was your time to shine on camera and you blew it. lol.

@SouthMainAuto 7 лет назад

Where were ya when I needed ya Jim!?

@guayaco-dm3vu 7 лет назад

I guess you missed the video where he told her .. I made many mistakes in life,but the one mistake I didn't make was marrying you....No words in her part,just blushhhhh.... This one here was her comeback.lol OMG I feel like i'm watching a soap opera sticking up for Eric here..Hahahaha

@eddiemartinez265 7 лет назад

Hey Eric it's never to late to say you love her!!!

@jamesgriffin4819 Год назад

Most informative diagnostic/repair performance I've ever seen! Thank you.

@michaelmanning97 7 лет назад

I start my day with cars and coffee on velocity,and South main auto

@Iamadroid 6 лет назад

Must not work for a living

@nicholaslandolina 6 лет назад

Man when it comes to electrical and finess mechanics your are a beast... You are a real mechanic... Some of the people out here are hammer and chisel mechanics and not very good at their job

@rrcoster 7 лет назад

Leave it to GM what a bad design flaw where the engineer sleeping on the job lol Why would you put a FPD Module exposed to the elements so easily where salt and water can get to it and then on top of that charge a arm and leg to replace it and have to reprogram it wow. If anyone following Ivan channel he just did same thing on 2013 GMC Acadia recently also but he used silicone around computer and connection to help seal the module from getting wrecked again. Keep up the good work your videos are always enjoy to watch Eric..O

@eddiemartinez265 7 лет назад

They all do it not just GM.

@chads8720 3 года назад

I've also seen it throw resistance off on pins 6 and 14 which should be 60 ohms....beauty of diagnosing something once you may find a quicker way to test once you go throw your diagnostic. Awesome video

@genrllee 7 лет назад

Eric, love the videos and the channel! I relate to your videos extremely well being a mechanic myself for over twenty years, but in lovely Florida without the rust you deal with lol. One thing though, I've noticed you never have a radio playing, is that because you turn it off for the videos, or you just don't have one playing period? Keep up the awesome work sir!

@jdrs4214 2 года назад

The DCMA (digital copyright millenium act) feelings pigs will probably make an appearance at his shop and threaten to take down his RU-vid channel for playing “free music.”

@kyhomegarage3430 7 лет назад

Hi Eric I love the way you eliminate fuel pump as potential problem by measuring current on fuel pump circuit. Good work. Cheers.

@theomnipresent1 7 лет назад

These car companies have lost their minds with all the modules they put in cars these days. Windows, door locks, air bags, brakes, mirrors, HVAC, engine, transmission, lighting, fuel pumps, etc... all have their own modules! And they're just overcomplicated and failing all over the place. They make the cars harder to diagnose and more expensive to fix since the modules are marked way up!

@SouthMainAuto 7 лет назад

Some Euro cars have OVEr 60 computers to make the car function

@andrewwmacfadyen6958 7 лет назад

It is all sweeping us toward self-driving cars, why is no major country in the world making a stand against this.

@eddiemartinez265 7 лет назад

That's the plan they want us all out of the repair work so they can get all the work.

@andrewwmacfadyen6958 7 лет назад

Prediction cars will have a mandatory life span 10 years then the crusher.

@adventureoflinkmk2 5 лет назад

That's the price we pay for fancy everywhere, all these neat electronics, the perfect balance between power/torque/fuel economy, and then throw in a little tightly intertwined ecosystem and planned obsolescence in for good measure. Oh yeah and you cant work on the car anymore

@todda.6291 Год назад

Thanks for the video! First time diagnosing one of these…had the exact issue..20 amp fuse would blow once FSCM was plugged back in..checked powers and grounds, checked fuel pump and draw all OK..Time to order a FSCM! Thanks for the great videos! Todd

@wymi 7 лет назад

Congrats on 65K subs !

@SouthMainAuto 7 лет назад

Thanks!

@samknop8784 2 года назад

I know this is from 5 years ago and you may never see it. but an old guy once taught me you can stick an extension and a swivel thru the holes in the spare and drop the bolt for the entire spare holder and the whole thing will drop on the ground. just watch your head🤣

@samknop8784 2 года назад

through the lug holes. and your gonna have to figure out what size i forget but got money on a 15