CHEVY SILVERADO FRONT AND REAR SHOCK/STRUT REMOVAL 

if you want to help out the channel, just use my Amazon link when sopping at amazon. amzn.to/2KEtHCp

Loved knowing what tools I needed prior. I actually wrote that down then gathered them and the job went MUCH quicker than I thought. GOOD JOB.

Glad I watched. I was going to purchase spring compression clamps to do the job. Nice to know I do not have to. Thanks for the great video !!

Good solid video, I like the safety awareness, a lot of people leave that out. Might recommend spraying everything with anti-seize ahead of time.

Would have been nice to see the front shocks removed. Other than that good info bud.

Why would someone put a dislike? a beautiful video?

I appreciate all the safety tips.

You should have showed you removing those fronts. They need to line up perfectly and the right angle or they will not juts slide right out. Took me a bit to figure it out. Words of advice... I sprayed all bolts and nuts front and rear the day before I did this job, and it was a piece of cake removing all bolts and nuts. Tops were cake. I used an impact on the top 2nd nut and didnt even need to hold the shock from below. Came off like a hot knife through butter.

Part # on front shocks

Thanks A Lot! Got me wanting to keep all this dough the shop trying to charge me and DIY it! What you say are the best shocks & struts to get for my '07 Silverado 1500? Then what site would you recommend to get them from? Please provide links, if possible. Thanks much!

I would have liked to see how you got the top nut loose. That one nut seems to be the hardest part. I have seen people cut them off due to being seized. Other than that thanks.

Which way do the front shocks face when reinstalling?? The bolt mounting plate on the bottom is angled & I've seen a vid of a guy putting it in against that angle. My bilsteins did not come with that instruction

The spring doesn’t need replaced?

If you jack the back of the truck up the right amount you don’t have to compress the rear shock.

What about the struts?

That's a before and after

Hello, Can't seem to find the bolts for the front shocks the two that go on the cross bar at the bottom of the shock mines need to be replace.

sometimes when u try to say $$$ u end up paying more $$ i was doing nine & i ended up breaking the 2 bottom bolt. do u know how can i fix it to retread it or at least the size of the bolt.nine is a 95 gmc sierra 2500 it look just like the one in the video. any help i 'll appreciate it thanks

Same process for 2005 sierra 4x4. Also, I got a 6 inch lift :/ is it still the same? I gotta replace my cv joints, I was told with a lift id have to remove the struts as well. Is this correct?

hi bro is it same with yukon 2008 2wd ???? & which kind of shocks is the best ? plz need ur help

Will this work on a 2005 4wd 5.3 Silverado 1500? Thanks!

Ok ok, turn some nuts already.