chevy Tahoe no crank or no start fix. Silverado avalanche suburban Yukon Denali escalade 

To all Gm owners before u spend any thing even time check the ground wires especially the one behind the engine they might be lose or cut .

2002 CHEVY SUBURBAN …Just in case anyone was having this problem . No crank no start …… fuel and battery gauges flip up still like it’s going to start and then dead silence . Replaced starter and back on the rd . Also when it went out couple issues I had was I tried jumping it one more time with a flat head and it blew the 40 amp fuse which caused the gas and battery gauge to stop flipping up when key was turned to on position . Lastly the replacement starter I purchased was longer than the original . So if you ran into that problem just know it will ….. I repeat will fit so don’t worry . Hope I helped someone as I searched every video looking for someone with the same issue on their suburban or if the larger one would fit and could t find not one video .

Thanks for the video truck been sitting up two years put a star on it still wouldn't crank watch your video and now it's runningrunning

Mannnn that's what happened to me. I have a 92 Astro van and it sat for 1year because it wouldnt crank or start. The starter has always been strong in this van. I knew it wasnt bad. But I had hired multiple mechanics to look at it and most of them said it was the starter Spent about 500 with different mechanics just misdiagnosing it saying it was the starter. So I finally broke down and bought a starter and changed it and it was still not turning over or starting. I called each of them and said told ya it wasnt the starter!!! With no where else to turn I just decided to get on the internet again and just keep lookin for something I didnt try. I ran into a post online where this really old guy was talking about safety neutral switches causing my symptoms. I do work on cars all the time but I had never heard of a safety neutral switch. and so upon looking up and learning what it is and what it does I realized on my model its on the steering column and so I moved wired around incase of a loose connection somewhere and I wiggled the damn shifter and it started right up. Haunt had a problem since. I spent so much money and for nothing!

Hey young man I’m so excited to tell you I found your channel and I love how you describe everything step-by-step but at the end of this video you said there’s going to be a video showing me how to replace the safety neutral switch, can you tell me where I can find that video I’ve been looking for it I don’t think I have found it yet so please I’m a new subscriber let me know what to look for that video or send me the links to it thank you sir God bless you and your family and your friends and all your viewers on your channel praying that your channel reaches 2 million very soon God bless you once again.✝️✝️✝️🙏🏻🇺🇸

I actually learned a lot from this video thank you! My grandma’s truck has no power to the #85 pin on starter relay and no power to the crank fuse while turning key to start. I’m thinking it’s the ignition switch, but I’m not sure how to test that! What do you think??

I have a 2007 chevy tahoe lt 5.3 v8 8 have no crank no start no lights can you tell me what it could be please

Bet this is another common ground issue

I have a 1999 GMC sierra 2500 with a 6.0 just replace the starter alternator and battery battery lights on turn the key and nothing any advice where to start all the relays are replaced

Did you find what's wrong it because I have the same problem with my 2003 GMC Yukon Denali.

I've been told that if your reverse lights come on when you shift into reverse, that the neutral safety switch is good. Signal path is usually ignition switch, (in cab) fuse, neutral safety switch, starter relay and finally starter. A quick way to see if the starter and it's wire connections are good is to take the cover off the starter relay (leave it plugged in) and use your fingers to give the tabs a quick sqeeze. Your starter should turn over. (Make sure car is in park first).

If you don't see a check engine light on the dash the minute you turn the key the computer isn't getting a connection. Double check with the obd2 port. If the fuses isn't blown and your amperage draw is acceptable. Your problem is the pcm.

You seem like a good guy, smart, well equipped, please don’t take shortcuts. Jackstands!

On my 2006 Silverado, terminal 85 is ground and 86 comes from the ignition.

Help! 2002 Chevy Tahoe. Alarm goes off, Battery went dead, new battery, alarm still goes off, car won’t start.

You had bad switch ?

Do you have the link to how to change the the safety neutral switch?

Thank you

So if it turns on with a jumper clip does that mean i need a new starter?

I have a crank no start and I have thrown more ground cables on this vehicle than God himself. Does anybody have a solution Or an idea or even a holy crap idea. Hell let's throw darts at a bored

Just get to the fukn point!!!!!!!!

You keep jumping all over the place and make it hard to follow what you're doing. What you're doing is not making it simple to follow!