I read about the model number given which is MSD338V5.0 it says it has a double core processor but some boards with model number MSD358V5.0 says 4 core, means it has a 4 core processor?? Please help.
Why are there horizontal lines on tge screen? This is the second video shown with a new board and the lines on the screen. Looks to me that the onboard video cards are bad!
Hello please can I ask you a question, I want to use this for a laptop with a 3.3v led backlight, I have noticed that this board only supplies a 5 volt and a 12 volts supply and it dos not have a 3.3v, can I use a Buck converter to reduce the voltage to 3.3 from either 5 volts or 12 volts supply on the bord????
For your 3.3v you need to cut all positive voltage cable (red wire) from lvds cable. And used a dc buck converter to adjust 3.3v from 12v .Don't give higher 3.3v on your laptop screen ,its will damage .
it"s nice but can you try any mobile mothar bord to make a smart tv, like , i have some android mobile but srccen is not good. and one laptop lcd . now i want to connect this lcd with my any mobile mothar bord . as like as mobile lcd. can you hepl me
ভাই আমি cv56xl-l এই টিভি কার্ড দিয়ে একটি কম্পিউটার মনিটর দিয়ে টিভি চালায়। আমার মনিটরটা প্রায় নষ্ট হয়ে গেছে। তাই এখন আমি আমার নষ্ট ল্যাপটপের প্যানেল দিয়ে এই কার্ডটা চালাতে চাই। এটা কি রিসেট দিতে হবে বা রিসেট নেবে ? আর আমার প্যানেলের রেজুলেশন ১২৮০*৮০০ এই সফটওয়্যার টা লাগবে। যদি পারেন সঠিক সমাধান দিয়ে আমায় উপকৃত করবেন।🙏🙏🙏🙏🙏
You can normally use only 5v or 12v screen, but if you some modify you can use 3.3v .first cut/disconnected all red cable from lvds cable from main board & out the lvds voltage jumper cable .use a dc buck converter to make 3.3v from 12v & supply screen voltage those red wire.
hello guys, I would like to know if you know if this 1440x900 LCD card is useful since I have seen that the firmware reset of 1g says no 1440x900 and effectively when I charge this reset with 1g if it shows full screen but with logo, but in logo it Actor, when I do it with the reset of 512 and the same firmware loads everything, but the screen is out of focus the mita, it does not appear full screen, I hope you can give me a solution, I will be aware of the answers thanks.
You need to reset your android tv is first ,than login with your gmail, & update Google Lc, RU-vid & Google chrome install with APK file on with sd card. Hope its work.
Hello please can you give me a link to download the firmware please because I don't have it but I have the unit. MSD338STV5.0 Android what is the code to enter setup screen on the remote please??
Every China main board has lots of firmware in many blog & side ,if you little search on the Google ,what you can done.so you people please understand the limitations of circumstances.Time is factor. don't upset my dear.but I will upload soon lots of firmware & bin resulotion file .what I have been colleteted from original company. Busy man so little lazy .....ha. ha ... love you all.good luck
can I ask you a question I'm in England and we use DVB TV -2 , do you think I can connect a USB TV dongle to the Android to watch TV???because the on-board chip and this unit does not support uk tv dvb2 so I was gonna use my phone dongle USB that I watch tv on my Android on my phone, can i connect this to MSD338STV5.0 Android do you think???
