CHR TOWER PART 2
In this video I report the last steps to build the CHR Towers. Woodworking; measurements, cutting, gluing and finishing the boxes plus results, crossovers and frequency response curves.
The CHR Towers are a fantastic pair of powerful audio, low bass, high quality speakers. Made in Walnut Hardwood mixed with Euro-Ply and veneer, this design relies on the Markaudio CHR-90 Full-range and the SB Acoustics SB15MFC30-8 Woofer. This is a two way speaker box that impresses by its power, SPL and High Fidelity performance, even using 5" woofer drivers and full-ranges.
CHR TOWER PART 1 LINK
• CHR Tower Speakers Par...
CHR TOWER PART 3 LINK
• Video
MATERIALS
Walnut Hardwood, Walnut Veneer, Euro Plywood, Metal, Drivers, X-over Components, Connectors.
Walnut hardwood case with Plywood side baffles. Finished with Good Stuff wax. Steel Metal modern spike feet finished in matte black.
LINKS
Drivers:
Markaudio CHR-90 Full-range driver:
www.madisounds...
SB Acoustics SB15MFC30-8:
www.madisounds...
Crossover parts:
1.5 mH Inductor
www.parts-expr...
15 uF Capacitor
www.parts-expr...
47 uF Capacitor
www.parts-expr...
Accessories:
Binding Posts:
amzn.to/3unCgdQ
Speaker spike feet:
amzn.to/3F2UwOu
Sonic Barrier:
www.parts-expr...
Speaker Wire - Oxygen Free Copper:
amzn.to/39tNkPe
MEASUREMENTS
Speaker Outside - 92 x 35 x 17 cm
Closed Box Internal - 16 x 13 x 31 cm (6.5 Liters)
Vented Box Internal - 67 x 13 x 31 cm (27 Liters)
Port - 13 x 3 x 28
ATTENTION!!!
NEW CROSSOVER:
Full Range - 47 uF Capacitor in series
Woofers - 1.5mH Inductor in series / 15 uF Capacitor in parallel
BASIC TOOLS FOR WOODWORKING
Plam Sander: amzn.to/39wtgvy
Compressor: amzn.to/3wAxB90
Nail Gun: amzn.to/3LrlYqm
Circular Saw: amzn.to/3yNB7Ql
Drill Kit: amzn.to/39osBMR
Drill Bits: amzn.to/3llbApI
Screwdriver Bits: amzn.to/3MmMgLS
Router: amzn.to/3wyyHCb
Router Circle Jig: amzn.to/3MuZLcw
Router Bit Set: amzn.to/3FRFriK
Clamps: amzn.to/3FR9IhO
Quick Clamps: amzn.to/3FSRufH
Soldering Station: amzn.to/3PCFLXk
INSTAGRAM: @sonnoradesign
28 сен 2024